From: Marek Vasut Date: Fri, 20 Feb 2026 20:22:19 +0000 (+0100) Subject: ASoC: tas2552: Allow audio enable GPIO to sleep X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5ebc20921b7fff9feb44de465448e17a382c9965;p=thirdparty%2Flinux.git ASoC: tas2552: Allow audio enable GPIO to sleep The audio enable GPIO is not toggled in any critical section where it could not sleep, allow the audio enable GPIO to sleep. This allows the driver to operate the audio enable GPIO connected to I2C GPIO expander. Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260220202332.241035-1-marex@nabladev.com Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c index 43449d7c25843..80206c2e09462 100644 --- a/sound/soc/codecs/tas2552.c +++ b/sound/soc/codecs/tas2552.c @@ -487,7 +487,7 @@ static int tas2552_runtime_suspend(struct device *dev) regcache_cache_only(tas2552->regmap, true); regcache_mark_dirty(tas2552->regmap); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); return 0; } @@ -496,7 +496,7 @@ static int tas2552_runtime_resume(struct device *dev) { struct tas2552_data *tas2552 = dev_get_drvdata(dev); - gpiod_set_value(tas2552->enable_gpio, 1); + gpiod_set_value_cansleep(tas2552->enable_gpio, 1); tas2552_sw_shutdown(tas2552, 0); @@ -583,7 +583,7 @@ static int tas2552_component_probe(struct snd_soc_component *component) return ret; } - gpiod_set_value(tas2552->enable_gpio, 1); + gpiod_set_value_cansleep(tas2552->enable_gpio, 1); ret = pm_runtime_resume_and_get(component->dev); if (ret < 0) { @@ -608,7 +608,7 @@ static int tas2552_component_probe(struct snd_soc_component *component) probe_fail: pm_runtime_put_noidle(component->dev); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), tas2552->supplies); @@ -621,7 +621,7 @@ static void tas2552_component_remove(struct snd_soc_component *component) pm_runtime_put(component->dev); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); }; #ifdef CONFIG_PM