From: Aleksander Jan Bajkowski <olek2@wp.pl>
Date: Sat, 1 Mar 2025 14:14:33 +0000 (+0100)
Subject: mediatek: filogic: migrate Netgate N60 to upstream PHY LED control
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=63d56af6c6567f08e18e1f1c8a69f1fac263235b;p=thirdparty%2Fopenwrt.git

mediatek: filogic: migrate Netgate N60 to upstream PHY LED control

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---

diff --git a/target/linux/mediatek/dts/mt7986a-netcore-n60.dts b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
index 2c129acbbab..9686b43b8d4 100644
--- a/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
+++ b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
@@ -109,7 +109,17 @@
 	phy6: phy@6 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <6>;
-		mxl,led-config = <0x0 0x0 0x0 0x3f0>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-3 {
+				reg = <3>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+			};
+		};
 	};
 
 	switch: switch@1f {
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index a1205e9556e..91a7892aa7d 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -76,6 +76,9 @@ mercusys,mr90x-v1-ubi)
 	ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"
 	ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
 	;;
+netcore,n60|)
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan" "eth1" "link tx rx"
+	;;
 netgear,wax220)
 	ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
 	;;