From: Al Cooper Date: Fri, 3 Jan 2020 18:18:01 +0000 (-0500) Subject: phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode X-Git-Tag: v5.6-rc1~140^2~16^2~37 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6597af4e4835ec0709638d48f73c11b5c624790f;p=thirdparty%2Flinux.git phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode Currently the Phy driver will put the USB phys into the max power saving mode (IDDQ) when there is no corresponding XHCI, EHCI or OHCI client (through rmmod, unbind or if the driver is not builtin). This change will also put the Phys into IDDQ mode on suspend so that S2 will get the additional power savings. Signed-off-by: Al Cooper Reviewed-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I --- diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index bd473d12ab280..ac7f7995c11f1 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -1002,8 +1002,6 @@ void brcm_usb_uninit_common(struct brcm_usb_init_params *params) void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params) { - if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) - USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB); } void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 217e3702ef4e5..634afc8037782 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -381,8 +381,15 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); if (priv->init_count) { - clk_disable_unprepare(priv->usb_20_clk); - clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + clk_disable_unprepare(priv->usb_20_clk); } return 0; }