From: Ian Abbott Date: Fri, 30 Jan 2026 16:47:51 +0000 (+0000) Subject: comedi: multiq3: Add sanity checks for I/O base address X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=66563dd6e3c5860e0a8b4b64a92f2ea1daf603b3;p=thirdparty%2Fkernel%2Flinux.git comedi: multiq3: Add sanity checks for I/O base address The "multiq3" driver uses an admin-supplied configuration option (`it->options[0]`) to configure the I/O port base address of a Multiq-3 board. It currently allows any base address to be configured but the hardware only supports base addresses (configured by on-board jumpers) in the range 0 to 0x3F0 on 16-byte boundaries. Add a sanity check to ensure the device is not configured at an unsupported base address. Signed-off-by: Ian Abbott Link: https://patch.msgid.link/20260130170416.49994-27-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/comedi/drivers/multiq3.c b/drivers/comedi/drivers/multiq3.c index ac369e9a262d..3dde3a1876d7 100644 --- a/drivers/comedi/drivers/multiq3.c +++ b/drivers/comedi/drivers/multiq3.c @@ -259,7 +259,8 @@ static int multiq3_attach(struct comedi_device *dev, int ret; int i; - ret = comedi_request_region(dev, it->options[0], 0x10); + ret = comedi_check_request_region(dev, it->options[0], 0x10, + 0, 0x3ff, 16); if (ret) return ret;