From: Salah Triki <salah.triki@gmail.com>
Date: Sun, 24 Aug 2025 12:06:09 +0000 (+0100)
Subject: iio: pressure: bmp280: Use gpiod_set_value_cansleep()
X-Git-Tag: v6.18-rc1~74^2~7^2~3
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=671b9b6d7f4fe17a174c410397e72253877ca64e;p=thirdparty%2Fkernel%2Fstable.git

iio: pressure: bmp280: Use gpiod_set_value_cansleep()

Replace `gpiod_set_value()` with `gpiod_set_value_cansleep()`, which is
required when the GPIO controller is connected via a slow bus such as
I2C. This is also safe to use in sleepable contexts like the driver
probe function.

Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index cf3f34f7bd7e7..c04e8bb4c9939 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -3212,7 +3212,7 @@ int bmp280_common_probe(struct device *dev,
 		return dev_err_probe(dev, PTR_ERR(gpiod), "failed to get reset GPIO\n");
 
 	/* Deassert the signal */
-	gpiod_set_value(gpiod, 0);
+	gpiod_set_value_cansleep(gpiod, 0);
 
 	data->regmap = regmap;