From: Abel Vesa Date: Wed, 24 Dec 2025 10:53:27 +0000 (+0200) Subject: dt-bindings: phy: qcom-edp: Add missing clock for X Elite X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6b99eeacf6abb1ff2d6463c84e490343f39cf11a;p=thirdparty%2Flinux.git dt-bindings: phy: qcom-edp: Add missing clock for X Elite On X Elite platform, the eDP PHY uses one more clock called ref. The current X Elite devices supported upstream work fine without this clock, because the boot firmware leaves this clock enabled. But we should not rely on that. Also, even though this change breaks the ABI, it is needed in order to make the driver disables this clock along with the other ones, for a proper bring-down of the entire PHY. So attach the this ref clock to the PHY. Cc: stable@vger.kernel.org # v6.10 Fixes: 5d5607861350 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles") Reviewed-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson Signed-off-by: Abel Vesa Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com Signed-off-by: Vinod Koul --- diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml index eb97181cbb95..bfc4d75f50ff 100644 --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml @@ -37,12 +37,15 @@ properties: - description: PLL register block clocks: - maxItems: 2 + minItems: 2 + maxItems: 3 clock-names: + minItems: 2 items: - const: aux - const: cfg_ahb + - const: ref "#clock-cells": const: 1 @@ -64,6 +67,29 @@ required: - "#clock-cells" - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - qcom,x1e80100-dp-phy + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + minItems: 3 + maxItems: 3 + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + additionalProperties: false examples: