From: Stefano Radaelli <stefano.radaelli21@gmail.com>
Date: Fri, 3 Oct 2025 12:50:28 +0000 (+0200)
Subject: arm64: dts: ti: var-som-am62p: Add support for WM8904 audio codec
X-Git-Tag: v6.19-rc1~100^2~18^2~28
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6f41007cf80d94b689fe4d7e07535dcd427802e7;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: ti: var-som-am62p: Add support for WM8904 audio codec

The VAR-SOM-AM62P can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.

This patch adds the WM8904 device to the appropriate I2C bus, enables
the McASP1 peripheral, and introduces the sound node to expose the
sound card to the system.

Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Link: https://patch.msgid.link/20251003125031.30539-3-stefano.radaelli21@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
index b93372f22732e..aba72d0b767c1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -112,6 +112,38 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "wm8904-audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+	};
+};
+
+&audio_refclk1 {
+	assigned-clock-rates = <100000000>;
 };
 
 &cpsw3g {
@@ -149,6 +181,19 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <400000>;
 	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_refclk1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_1v8>;
+		DBVDD-supply = <&reg_3v3>;
+		DCVDD-supply = <&reg_1v8>;
+		MICVDD-supply = <&reg_1v8>;
+	};
 };
 
 &main_i2c3 {
@@ -179,6 +224,16 @@
 		>;
 	};
 
+	pinctrl_mcasp1: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+			AM62PX_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (P24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+
 	pinctrl_mdio1: main-mdio1-default-pins {
 		pinctrl-single,pins = <
 			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
@@ -280,6 +335,23 @@
 	};
 };
 
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>;  /* MCASP_IIS_MODE */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 0 2 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tdm-slots = <2>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &sdhci0 {
 	/* On-module eMMC */
 	ti,driver-strength-ohm = <50>;