From: David Lechner Date: Thu, 10 Jul 2025 20:43:40 +0000 (-0500) Subject: iio: adc: ad7173: fix setting ODR in probe X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6fa908abd19cc35c205f343b79c67ff38dbc9b76;p=thirdparty%2Fkernel%2Fstable.git iio: adc: ad7173: fix setting ODR in probe Fix the setting of the ODR register value in the probe function for AD7177. The AD7177 chip has a different ODR value after reset than the other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip. The driver already has this information available in odr_start_value and uses it when checking valid values when writing to the sampling_frequency attribute, but failed to set the correct initial value in the probe function. Fixes: 37ae8381ccda ("iio: adc: ad7173: add support for additional models") Signed-off-by: David Lechner Link: https://patch.msgid.link/20250710-iio-adc-ad7173-fix-setting-odr-in-probe-v1-1-78a100fec998@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 2173455c0169..4413207be28f 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -1589,6 +1589,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan_st_priv->cfg.bipolar = false; chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF; + chan_st_priv->cfg.odr = st->info->odr_start_value; chan_st_priv->cfg.openwire_comp_chan = -1; st->adc_mode |= AD7173_ADC_MODE_REF_EN; if (st->info->data_reg_only_16bit) @@ -1655,7 +1656,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan->scan_index = chan_index; chan->channel = ain[0]; chan_st_priv->cfg.input_buf = st->info->has_input_buf; - chan_st_priv->cfg.odr = 0; + chan_st_priv->cfg.odr = st->info->odr_start_value; chan_st_priv->cfg.openwire_comp_chan = -1; chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");