From: Mark Clarkstone Date: Fri, 6 May 2016 21:26:56 +0000 (+0100) Subject: mdhelp: added more (include) docs mdhelp: added/updated more screenshots and gave... X-Git-Tag: v4.2.1~553 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6fd0f83ab9e76bb71d4a53c583eedbde5bb9e610;p=thirdparty%2Ftvheadend.git mdhelp: added more (include) docs mdhelp: added/updated more screenshots and gave some a trim ;) mdhelp: use the tvh_include tag throughout on many help docs mdhelp: update various texts --- diff --git a/docs/class/access_entry.md b/docs/class/access_entry.md index 71a6d836f..2057109c1 100644 --- a/docs/class/access_entry.md +++ b/docs/class/access_entry.md @@ -17,7 +17,7 @@ to asterisk. Only network prefix is matched then. inc/common_button_table_end -Entries are checked in order, the following +Entries are checked in order (when logging in, etc), the following functions allows you to change the ordering: Button | Function @@ -29,8 +29,6 @@ Button | Function inc/add_grid_entry -####An Example - !['Access Entry Example'](docresources/accessentriesnewuser.png) If you would like to allow anonymous access to your Tvheadend diff --git a/docs/class/config.md b/docs/class/config.md index 0b5c50429..bba148360 100644 --- a/docs/class/config.md +++ b/docs/class/config.md @@ -7,7 +7,7 @@ the core Tvheadend functionality. ###Menu Bar/Buttons -The tab has the following buttons: +The the following functions are available: Button | Function -----------------------|------------------- diff --git a/docs/class/dvrautorec.md b/docs/class/dvrautorec.md index 6d4dc80ed..d9b13b55c 100644 --- a/docs/class/dvrautorec.md +++ b/docs/class/dvrautorec.md @@ -12,8 +12,6 @@ This tab controls EPG-driven recording rules. inc/add_grid_entry -####An Example - If you wanted to record any programs matching "BBC News" on BBC One you would enter something like this into the add entry dialog: @@ -39,6 +37,8 @@ automatically start being recorded.** inc/edit_grid_entries +!['Edit Autorec'](docresources/editautorec.png) + --- inc/del_grid_entries diff --git a/docs/class/dvrentry.md b/docs/class/dvrentry.md index b70a7e0d4..8953e015e 100644 --- a/docs/class/dvrentry.md +++ b/docs/class/dvrentry.md @@ -76,6 +76,15 @@ Button | Function inc/add_grid_entry +Note that the *[Add]* functionality is only available in +the *Upcoming/Current Recordings* tab. + +####Manual Recording Entry Example + +This is an example of a one-time recording entry: + +!['Add new recording dialog'](docresources/addnewrecentry.png) + ####Adding an Entry Using the EPG Using the Electronic Program Guide search functionality, find the diff --git a/docs/class/dvrtimerec.md b/docs/class/dvrtimerec.md index 72ee69e6e..106be7b37 100644 --- a/docs/class/dvrtimerec.md +++ b/docs/class/dvrtimerec.md @@ -12,8 +12,6 @@ This tab controls timer-driven recording rules. inc/add_grid_entry -####An Example - ![Timer add example](docresources/dvrtimeradd.png) Note that when you create a rule/entry it will also generate a [DVR Entry](class/dvrentry). diff --git a/docs/class/imagecache.md b/docs/class/imagecache.md index 182998741..816f905a6 100644 --- a/docs/class/imagecache.md +++ b/docs/class/imagecache.md @@ -9,7 +9,7 @@ providers. ###Menu Bar/Buttons -The following buttons are available: +The following functions are available: Button | Function ----------------------------|------------------- diff --git a/docs/class/mpegts_mux.md b/docs/class/mpegts_mux.md index d81bb851b..9c65d3611 100644 --- a/docs/class/mpegts_mux.md +++ b/docs/class/mpegts_mux.md @@ -8,50 +8,38 @@ streams - so an IP address, in effect. --- -###Menu Bar/Buttons +inc/common_button_table_start -The following functions are available: - -Button | Function ----------------|--------- -**Save** | Save any changes made to the mux entries. -**Undo** | Undo any changes made to the mux entries since the last save. -**Add** | Add a new mux. -**Delete** | Delete an existing mux. -**Edit** | Edit an existing mux. This allows you to change any of the parameters you’d otherwise set when adding a new mux, e.g. EPG scan, character set, etc. -**View Level** | Change the interface view level to show/hide more advanced options. -**Help** | Displays this help page. +inc/common_button_table_end --- -###Playing a Mux +###Adding an Entry/Mux -You can stream a complete multiplex by copying/pasting the *Play* link -into the desired player/software. +To add a mux press the *[Add]* button from the menu bar and select the +network you want to add the mux to: -**Notes**: -* The *Play* links don't link to the actual stream but to a playlist for -use with media players such as VLC, If you'd prefer to receive the raw -transport stream instead, you can do so by removing the `/play/` path from -the *Play* URL. -* Not all devices support receiving a complete mux, notably low -powered set-top-boxes and older USB tuners. +!['Network selection'](docresources/addmuxnetworkselection.png) ---- +Then enter the mux information: -###Adding a Mux +!['Add Mux Dialog'](docresources/configaddmuxexample.png) -To add a mux press the *[Add]* button from the menu bar and select the -network you want to add the mux to. +Pressing the *[Save]* button (at the bottom of the dialog) +will commit your changes and close the dialog, pressing the *[Apply]* +button will commit your changes but won't close the dialog, pressing +the *[Cancel]* button closes the dialog - any unsaved changes will be +lost. -You only really need to add muxes if the pre-defined list didn't +Note: You only really need to add muxes if the pre-defined list didn't work, e.g. because of out-of-date data as broadcasters re-arrange their services or because automatic detection (network discovery) hasn't successfully found all the muxes over time. -!['Add Mux Dialog'](docresources/configaddmuxexample.png) - -**Notes**: +**Tips**: +* If you're not sure what to enter here, take a look at the "If Necessary, +Manually Add Muxes" section on the [Configure Tvheadend](configure_tvheadend) +page. * Some tuners (or drivers) require more tuning parameters than others so be sure to enter as many tuning parameters as possible. * Newly added muxes are automatically set to the *PEND* state. @@ -60,27 +48,37 @@ others so be sure to enter as many tuning parameters as possible. --- -###Editing a Mux - -To edit a mux highlight the desired mux from within the grid, and -press the *[Edit]* button from the menu bar. - -**Tip**: You can also make changes to a mux from within the grid. +inc/edit_grid_entries --- -###Deleting a Mux +###Deleting an Entry/Mux -To delete a mux highlight the desired mux from within the grid, and -press the *[Delete]* button from the menu bar. +To delete a mux highlight (select) the desired muxes from within the +grid, and press the *[Delete]* button from the menu bar. Deleting a mux will also remove any associated services, including those mapped to channels. If you have network discovery enabled any previously deleted muxes found in the NIT during a scan will automatically be re-added. -**Tip**: You can select all muxes within the grid by pressing ctrl+A. -You can also ctrl+click to make additional selections, or shift+click to -select a range. +inc/selecting_entries_tip + +inc/paging_tip + +--- + +###Playing a Mux + +You can stream a complete multiplex by copying/pasting the *Play* icon link +into the desired player/software. + +**Notes**: +* The links don't link to the actual stream but to a playlist for +use with media players such as VLC, If you'd prefer to receive the raw +transport stream instead, you can do so by removing the `/play/` path from +the URL. +* Not all devices support receiving a complete mux, notably low +powered set-top-boxes and older USB tuners. --- diff --git a/docs/class/mpegts_mux_sched.md b/docs/class/mpegts_mux_sched.md index 14bfcec22..43986aa5a 100644 --- a/docs/class/mpegts_mux_sched.md +++ b/docs/class/mpegts_mux_sched.md @@ -28,7 +28,7 @@ To edit an entry highlight (select) the entry from within the grid, and press th *[Edit]* button from the menu bar. A common set of fields is used for the Add or Edit functions, most of -which can also be seen in the grid view: +which can be seen in the grid view: !['Mux Add/Edit Example'](docresources/configdvbmuxsched1.png) diff --git a/docs/class/mpegts_network.md b/docs/class/mpegts_network.md index 960709aec..a59cb76a2 100644 --- a/docs/class/mpegts_network.md +++ b/docs/class/mpegts_network.md @@ -24,35 +24,36 @@ Click the desired network type (above) to see all available --- -###Menu Bar/Buttons +inc/common_button_table_start -The following functions are available: +inc/common_button_table_end + +The following tab specific buttons are available: Button | Function ---------------|--------- -**Save** | Save any changes made to the network configuration. -**Undo** | Undo any changes made to the network configuration since the last save. -**Add** | Add a new network. You can choose from any of the types described above. -**Delete** | Delete an existing network. This will also remove any association with an adapter. -**Edit** | Edit an existing network. This allows you to change any of the parameters you’d otherwise set when adding a new network, e.g. network discovery, idle scan, etc. - similar to using the check boxes to enable/disable functions. **Force Scan** | Force a new scan (i.e. scan all muxes for services) for the selected networks. -**View Level**| Change the interface view level to show/hide more advanced options. -**Help** | Displays this help page. --- -###Add/Edit a Network +###Adding an Entry/Network To create a network click the *[Add]* button from the menu bar and -then select the required network type, then using the resultant dialog -enter/select the desired network options. To edit a network highlight -(select) the network within the grid, and then press the *[Edit]* -button from the menu bar. +then select the required network type: -A common set of fields is used for the _Add_ or _Edit_ functions, most -of which can also be seen in the grid view: +!['Network selection'](docresources/networktypeselect.png) -!['Add/Edit Network' Dialog - DVB-S/2](docresources/dvbnetworkedit.png) +Then using the resultant dialog enter/select the desired network +options. A common set of fields is used for the *[Add]* dialog, +most of which can be seen in the grid view. + +!['Add new network'](docresources/addnewnetwork.png) + +Pressing the *[Save]* button (at the bottom of the dialog) +will commit your changes and close the dialog, pressing the *[Apply]* +button will commit your changes but won't close the dialog, pressing +the *[Cancel]* button closes the dialog - any unsaved changes will be +lost. **Notes**: @@ -66,10 +67,20 @@ For more detailed information on networks and how to set them up, see --- +inc/edit_grid_entries + +!['Add/Edit Network' Dialog - DVB-S/2](docresources/dvbnetworkedit.png) + +--- + +inc/del_grid_entries + +--- + ###Force Scanning -Highlight the network(s) you would like to force scan and then press -the "Force Scan" button from the menu bar. +Highlight (select) the network(s) you would like to force scan, and +then press the "Force Scan" button from the menu bar. Force scanning can take some time. You may continue to use Tvheadend while a scan is in progress, but doing so will increase the time needed @@ -77,14 +88,8 @@ for it to complete. Note that the time required can vary depending on a number of factors, such as how many tuners you have available and the number of muxes on each. - **Tip**: You may select more than one network by holding ctrl and - clicking on additional networks. - ---- - -###Deleting a Network +inc/selecting_entries_tip -To delete a network highlight (select) the network within the grid, and then -press the *[Delete]* button. +inc/paging_tip --- diff --git a/docs/class/mpegts_service.md b/docs/class/mpegts_service.md index 70869da50..f17a9e9eb 100644 --- a/docs/class/mpegts_service.md +++ b/docs/class/mpegts_service.md @@ -8,15 +8,16 @@ Services are automatically pulled from muxes and can be mapped to Channels. The following functions are available: -Button | Function ------------------|--------- -**Save** | Save any changes made. -**Undo** | Undo any changes made since the last save. -**Edit** | Edit an existing service. -**Delete** | Delete a service. + +inc/common_button_table_start + +inc/common_button_table_end + +The following tab specific buttons are available: + +Button | Function +---------------|--------- **Map Services** | Drop down menu: Map selected services, map the highlighted services within the grid. Map all services, map all available services as channels. Both options use the *Map services to channels* dialog. -**View Level** | Change the interface view level to show/hide more advanced options. -**Help** | Displays this help page. --- @@ -25,15 +26,17 @@ Button | Function There are a number of methods to mapping available services. *Map all services* and *Map selected services* functions use the -following dialog. +following *Map services to channels* dialog: !['Service mapper dialog'](docresources/mapservicesdialog.png) ####Mapping All -Press the "Map services" button and then "Map all services". +Press the *[Map services]* button and then *[Map all services]*: + +!['Map All Services'](docresources/mapservicesall.png) -The *Map services to channels* dialog will then appear listing all available services and various +The *Map services to channels* dialog will now appear, listing all available services and various other [mapping options.](class/service_mapper) The ticked check boxes [✓] indicate which services will be mapped, when you're happy with the selection press the "Map services" button. You will then be taken to the Service @@ -41,13 +44,16 @@ Mapper tab which will begin mapping services to channels. ####Mapping Selected -While holding ctrl (single selection) or shift (to select a range), -click on the services you would like to map as channels. Once you're +Click on the services you would like to map as channels. Once you're done selecting, press the "Map services" button and then -"Map selected services" - **be careful not to click on the grid or -you'll lose your selection!** +"Map selected services" - be careful not to click on the grid or +you'll lose your selection! + +inc/selecting_entries_tip + +!['Map selected'](docresources/mapselectedservices.png) -The *Map services to channels* dialog will then appear listing all available services and various +The *Map services to channels* dialog will now appear, listing all available services and various other [mapping options.](class/service_mapper) The ticked check boxes [✓] indicate which services will be mapped, when you're happy with the selection press the "Map services" button. You will @@ -65,15 +71,15 @@ You can map/remove a service to/from an existing channel by doing the following: **1)** Find the desired service from within the services grid. If you have a lot of services you may want to use filtering to limit the -number of grid entries, you can do this by moving your mouse over the -*Service name* column, a down arrow ▾ should now be visible, clicking +number of grid entries, you can do this by hovering your mouse over the +*Service name* column, a down arrow ▾ should now be visible. Clicking the arrow will then display a list of options, move your mouse down to "Filters", a text box should then appear, click on it and enter the desired service's name. !['Service filtering'](docresources/servicefilter.png) -**Tip**: Remember to remove the filter when you're finished (untick the +**Tip**: Remember to remove the filter when you're finished (uncheck the check box next to the "Filters" option). **2)** Double click on the channel field, a drop down listing of all defined @@ -86,30 +92,10 @@ you'd like to associate/disassociate the service with. --- -###Editing Services - -You can edit services by highlighting (selecting) the services from -within the grid and then clicking the *[Edit]* button from the menu bar. - -!['Edit service'](docresources/serviceedit.png) - -If you select more than one service from within the grid the -*Edit service* dialog (above) will look slightly different. - -!['Edit multiple services'](docresources/serviceedit2.png) - -Ticking the additional check box (before each setting) will apply that -setting to all selected services. +inc/edit_grid_entries --- -###Deleting Services - -You can delete services by selecting them from within the grid, and then -pressing the *[Delete]* button from the menu bar. - -**Tip**: You can select all services within the grid by pressing ctrl+A. -You can also ctrl+click to make additional selections, or shift+click to -select a range. +inc/del_grid_entries --- diff --git a/docs/class/passwd.md b/docs/class/passwd.md index 07ee0848c..98a2cd8e5 100644 --- a/docs/class/passwd.md +++ b/docs/class/passwd.md @@ -5,50 +5,26 @@ where you set and maintain all user passwords (e.g. for streaming or DVR access) --- -###Menu Bar/Buttons +inc/common_button_table_start -The tab has the following buttons: - -Button | Function -----------------------------|------------------- -**Save** | Save all changes made to the grid/entries. -**Undo** | Revert all changes since last save. -**Add** | Display the *Add Password* dialog. -**Delete** | Delete the selected entry/entries. -**Edit** | Edit the selected entry. -**View Level**| Change the interface view level to show/hide more advanced options. -**Help** | Display this help page. +inc/common_button_table_end --- -###Adding and Editing an Entry/Password - -To add an entry press the *[Add]* button from the menu bar. - -To edit an entry highlight (select) the entry from the grid, then press the -*[Edit]* button from the menu bar. - -Be aware that the username you enter -must match a username/entry in the [Access Entries](class/access_entry) -tab for it to apply. You may have multiple password entries for the -same username if you wish. +inc/add_grid_entry !['Add Password dialog'](docresources/configpasswdadd.png) -Note that both the *[Add]* and *[Edit]* buttons display similar dialogs. - -**Tip**: You can quickly make changes to an entry by double-clicking on -the desired field within the grid. See *Editing Fields* on the [Web interface Guide - General](webui_general) -page for details. +Be aware that the username you enter must match a username/entry in +the [Access Entries](class/access_entry) tab for it to apply. You may +have multiple password entries for the same username if you wish. --- -### Deleting an Entry. +inc/edit_grid_entries -To delete an password entry highlight (select) the entry from the grid, then press -the *[Delete]* button from the menu bar. +--- -**Tip**: Rather than deleting an entry, you can disable it instead by -pressing the *[Edit]* button, and unticking the "Enabled" check box. +inc/del_grid_entries --- diff --git a/docs/class/profile.md b/docs/class/profile.md index cb394b90e..009151eb0 100644 --- a/docs/class/profile.md +++ b/docs/class/profile.md @@ -35,7 +35,7 @@ Button | Function ####Add/Edit Dialog Example A common set of fields is used for the _Add_ or _Edit_ functions, most -of which can also be seen in the grid view: +of which can be seen in the grid view: !['Add/Edit Stream Profiles' Dialog - mkv](docresources/configstreamprofiles1.png) diff --git a/docs/docresources/accessconfigipblockentries.png b/docs/docresources/accessconfigipblockentries.png index 3c15c7a40..f5c486a41 100644 Binary files a/docs/docresources/accessconfigipblockentries.png and b/docs/docresources/accessconfigipblockentries.png differ diff --git a/docs/docresources/accessentriesgrid.png b/docs/docresources/accessentriesgrid.png index 527b8a9c8..3ed7d2b27 100644 Binary files a/docs/docresources/accessentriesgrid.png and b/docs/docresources/accessentriesgrid.png differ diff --git a/docs/docresources/accessentriesnewuser.png b/docs/docresources/accessentriesnewuser.png index 6415876bf..970c9e5bb 100644 Binary files a/docs/docresources/accessentriesnewuser.png and b/docs/docresources/accessentriesnewuser.png differ diff --git a/docs/docresources/addmuxnetworkselection.png b/docs/docresources/addmuxnetworkselection.png new file mode 100644 index 000000000..1f11308ce Binary files /dev/null and b/docs/docresources/addmuxnetworkselection.png differ diff --git a/docs/docresources/addnewnetwork.png b/docs/docresources/addnewnetwork.png new file mode 100644 index 000000000..a79f52b9f Binary files /dev/null and b/docs/docresources/addnewnetwork.png differ diff --git a/docs/docresources/addnewrecentry.png b/docs/docresources/addnewrecentry.png new file mode 100644 index 000000000..4e9d78b1d Binary files /dev/null and b/docs/docresources/addnewrecentry.png differ diff --git a/docs/docresources/configbaseall.png b/docs/docresources/configbaseall.png index 42d85d081..d547efc60 100644 Binary files a/docs/docresources/configbaseall.png and b/docs/docresources/configbaseall.png differ diff --git a/docs/docresources/configdvbmux.png b/docs/docresources/configdvbmux.png index a8d936b54..1a7bfa413 100644 Binary files a/docs/docresources/configdvbmux.png and b/docs/docresources/configdvbmux.png differ diff --git a/docs/docresources/configdvbservices.png b/docs/docresources/configdvbservices.png index f0c808070..d65fb53d2 100644 Binary files a/docs/docresources/configdvbservices.png and b/docs/docresources/configdvbservices.png differ diff --git a/docs/docresources/configimagecache.png b/docs/docresources/configimagecache.png index b201e3bb9..1118ee438 100644 Binary files a/docs/docresources/configimagecache.png and b/docs/docresources/configimagecache.png differ diff --git a/docs/docresources/configpasswordentries.png b/docs/docresources/configpasswordentries.png index 675cf6660..0833bdc34 100644 Binary files a/docs/docresources/configpasswordentries.png and b/docs/docresources/configpasswordentries.png differ diff --git a/docs/docresources/dvbinputsnetwork.png b/docs/docresources/dvbinputsnetwork.png index fe6c97491..35e81528d 100644 Binary files a/docs/docresources/dvbinputsnetwork.png and b/docs/docresources/dvbinputsnetwork.png differ diff --git a/docs/docresources/editautorec.png b/docs/docresources/editautorec.png new file mode 100644 index 000000000..40bbace54 Binary files /dev/null and b/docs/docresources/editautorec.png differ diff --git a/docs/docresources/mapselectedservices.png b/docs/docresources/mapselectedservices.png new file mode 100644 index 000000000..270b21d02 Binary files /dev/null and b/docs/docresources/mapselectedservices.png differ diff --git a/docs/docresources/mapservicesall.png b/docs/docresources/mapservicesall.png new file mode 100644 index 000000000..76570756a Binary files /dev/null and b/docs/docresources/mapservicesall.png differ diff --git a/docs/docresources/networktypeselect.png b/docs/docresources/networktypeselect.png new file mode 100644 index 000000000..ad42e09e4 Binary files /dev/null and b/docs/docresources/networktypeselect.png differ diff --git a/docs/docresources/satipconfig.png b/docs/docresources/satipconfig.png index 03eddc8af..e78d60b82 100644 Binary files a/docs/docresources/satipconfig.png and b/docs/docresources/satipconfig.png differ diff --git a/docs/docresources/tvadapterparams.png b/docs/docresources/tvadapterparams.png index 383b6ef29..c4228b3a1 100644 Binary files a/docs/docresources/tvadapterparams.png and b/docs/docresources/tvadapterparams.png differ diff --git a/docs/docresources/tvadaptertree.png b/docs/docresources/tvadaptertree.png index e05497e58..425d139ba 100644 Binary files a/docs/docresources/tvadaptertree.png and b/docs/docresources/tvadaptertree.png differ diff --git a/docs/markdown/inc/add_grid_entry.md b/docs/markdown/inc/add_grid_entry.md index f418815cb..05a78a1d3 100644 --- a/docs/markdown/inc/add_grid_entry.md +++ b/docs/markdown/inc/add_grid_entry.md @@ -2,8 +2,7 @@ To add an entry click the *[Add]* button from the menu bar, the add dialog should now be displayed. A common set of fields is used for the -add dialog, most of which can also be seen in the grid view. - +add dialog, most of which can be seen in the grid view. Pressing the *[Save]* button (at the bottom of the dialog) will commit your changes and close the dialog, pressing the *[Apply]* button will commit your changes but won't close the dialog, pressing diff --git a/docs/markdown/inc/del_grid_entries.md b/docs/markdown/inc/del_grid_entries.md index 681173cac..ebe44e230 100644 --- a/docs/markdown/inc/del_grid_entries.md +++ b/docs/markdown/inc/del_grid_entries.md @@ -5,11 +5,9 @@ menu bar. **Deleting can't be undone. You will be prompted to confirm. ** -**Tips**: - -* Rather than deleting an entry, you can disable it instead by +**Tip**: Rather than deleting an entry, you can disable it instead by unchecking the "Enabled" check box (if available). -* You can select all entries within the grid by pressing ctrl+A. -You can also ctrl+click to make additional selections, or shift+click to -select a range. +inc/selecting_entries_tip + +inc/paging_tip diff --git a/docs/markdown/inc/edit_grid_entries.md b/docs/markdown/inc/edit_grid_entries.md index d9baba6e9..e94600ce8 100644 --- a/docs/markdown/inc/edit_grid_entries.md +++ b/docs/markdown/inc/edit_grid_entries.md @@ -2,9 +2,9 @@ There are two methods to editing an entry. -**Tip**: You can select all entries within the grid by pressing ctrl+A. -You can also ctrl+click to make additional selections, or shift+click to -select a range. +inc/selecting_entries_tip + +inc/paging_tip ####Editing in the Grid @@ -22,7 +22,7 @@ can now be kept (*[Save]* button), or abandoned (*[Undo]* button). Highlight (select) the entries in the grid that you'd like to edit, then click the *[Edit]* button from the menu bar, the edit dialog should now be displayed. A common set of fields is used for the edit dialog, most -of which can also be seen in the grid view. Note that when editing +of which can be seen in the grid view. Note that when editing multiple entries there is an additional check box before each setting, ticking it will apply that setting to all selected entries. diff --git a/docs/markdown/inc/paging_tip.md b/docs/markdown/inc/paging_tip.md new file mode 100644 index 000000000..16a1e9d2f --- /dev/null +++ b/docs/markdown/inc/paging_tip.md @@ -0,0 +1,3 @@ +\n**Tip**: By default Tvheadend will only show a small selection of +entries - you can increase the number of entries displayed by using the +paging selector at the bottom right of the page. diff --git a/docs/markdown/inc/selecting_entries_tip.md b/docs/markdown/inc/selecting_entries_tip.md new file mode 100644 index 000000000..aac8177b7 --- /dev/null +++ b/docs/markdown/inc/selecting_entries_tip.md @@ -0,0 +1,3 @@ +\n**Tip**: You can select all entries within the grid by pressing ctrl+A. +You can also ctrl+click to make additional selections, or shift+click to +select a range. diff --git a/docs/markdown/tv_adapters.md b/docs/markdown/tv_adapters.md index 5495e810e..36994cdd1 100644 --- a/docs/markdown/tv_adapters.md +++ b/docs/markdown/tv_adapters.md @@ -8,7 +8,7 @@ The adapters and tuners are listed and edited in a tree. ###Buttons -The following buttons are available: +The following functions are available: Button | Function ---------------|---------