From: Fil Dunsky Date: Sat, 3 Jan 2026 22:00:14 +0000 (+0300) Subject: mediatek: add support for Airpi AP3000M X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6ff4557317139cc02003db9d058f4d9d6ba859ce;p=thirdparty%2Fopenwrt.git mediatek: add support for Airpi AP3000M This adds support for the Airpi AP3000M 5G CPE based on MediaTek MT7981B. Specifications: SoC: MediaTek MT7981B (dual-core ARM Cortex-A53) RAM: 1GB DDR4 Storage: 8GB or 16GB eMMC Ethernet: 1x 2.5GbE LAN, 1x 1GbE WAN Wireless: 2.4GHz/5GHz 802.11ax Buttons: Reset, WPS LEDs: System, 2.4GHz WiFi, 5GHz WiFi Cooling: PWM-controlled fan Expansion: M.2 slot for 5G modem The factory partition (mmcblk0p2) is empty in stock firmware. Execute via SSH before flashing OpenWrt: ``` dd if=/lib/firmware/MT7981_iPAiLNA_EEPROM.bin of=/dev/mmcblk0p2 bs=4k count=1 MAC addresses ``` Fixed MAC addresses are derived by macaddr_generate_from_mmc_cid. Installation via U-Boot web page Set static IP 192.168.88.2/255.255.255.0 on your computer. Connect to the 1GbE port (WAN) and hold the reset button while booting the device. Wait for about 6 seconds, and release the reset button. Open U-boot web page on your browser at http://192.168.88.1 Select the OpenWRT sysupgrade image, upload it, and start the upgrade. Wait for automatic reboot. Installation via sysupgrade Flash the sysupgrade file via LuCI upgrade page without saving the settings. Signed-off-by: Fil Dunsky Link: https://github.com/openwrt/openwrt/pull/21397 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mediatek/dts/mt7981b-airpi-ap3000m.dts b/target/linux/mediatek/dts/mt7981b-airpi-ap3000m.dts new file mode 100644 index 00000000000..c17e8034bb6 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-airpi-ap3000m.dts @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include +#include +#include + +#include "mt7981b.dtsi" + +/ { + model = "Airpi AP3000M"; + compatible = "airpi,ap3000m", "mediatek,mt7981"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + serial0 = &uart0; + + led-boot = &led_sys_blue; + led-failsafe = &led_sys_blue; + led-running = &led_sys_blue; + led-upgrade = &led_sys_blue; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "root=PARTLABEL=rootfs rootwait"; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_sys_blue: led-0 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-2 { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <52000000>; + vmmc-supply = <®_3p3v>; + no-sd; + no-sdio; + non-removable; + status = "okay"; + + card@0 { + compatible = "mmc-card"; + reg = <0>; + + block { + compatible = "block-device"; + + partitions { + block-partition-factory { + partname = "factory"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + }; + }; + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + phy-handle = <&phy1>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; +}; + +&mdio_bus { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <1>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&pio>; + realtek,aldps-enable; + }; +}; + +&pio { + mmc0_pins_default: mmc0-pins-default { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; + + pwm2_pins: pwm2-pins { + mux { + function = "pwm"; + groups = "pwm2"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins>; + status = "okay"; +}; + +&fan { + pwms = <&pwm 2 40000 0>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&xhci { + vbus-supply = <®_5v>; + status = "okay"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index bfa00d1b44e..61536f4fdda 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -6,6 +6,10 @@ board=$(board_name) board_config_update case $board in +airpi,ap3000m) + ucidef_set_led_netdev "wlan2g" "WLAN2G" "orange:wlan-2ghz" "phy0-ap0" "link tx rx" + ucidef_set_led_netdev "wlan5g" "WLAN5G" "white:wlan-5ghz" "phy1-ap0" "link tx rx" + ;; abt,asr3000) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 2519c97b9f8..fd7c159aab6 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -88,12 +88,6 @@ mediatek_setup_interfaces() bananapi,bpi-r3) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "sfp1 wan" ;; - bananapi,bpi-r3-mini|\ - edgecore,eap111|\ - huasifei,wh3000|\ - huasifei,wh3000-pro) - ucidef_set_interfaces_lan_wan eth0 eth1 - ;; bananapi,bpi-r4) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 sfp-lan" "wan sfp-wan" ;; @@ -123,6 +117,13 @@ mediatek_setup_interfaces() zyxel,nwa50ax-pro) ucidef_set_interface_lan "eth0" ;; + airpi,ap3000m|\ + bananapi,bpi-r3-mini|\ + edgecore,eap111|\ + huasifei,wh3000|\ + huasifei,wh3000-pro) + ucidef_set_interfaces_lan_wan eth0 eth1 + ;; cudy,m3000-v1|\ cudy,tr3000-256mb-v1|\ cudy,tr3000-v1|\ @@ -210,6 +211,11 @@ mediatek_setup_macs() local label_mac="" case $board in + airpi,ap3000m) + base_mac=$(macaddr_generate_from_mmc_cid mmcblk0) + lan_mac="$base_mac" + wan_mac="$(macaddr_add "$base_mac" 1)" + ;; acer,predator-w6|\ acer,predator-w6d|\ acer,vero-w6m) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 87d91b401d8..907dd00d364 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -33,6 +33,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress ;; + airpi,ap3000m) + base_mac=$(macaddr_generate_from_mmc_cid mmcblk0) + [ "$PHYNBR" = "0" ] && macaddr_add $base_mac 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $base_mac 3 > /sys${DEVPATH}/macaddress + ;; asus,rt-ax59u) CI_UBIPART="UBI_DEV" addr=$(mtd_get_mac_binary_ubi "Factory" 0x4) diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 94a8df37cda..dde54a053df 100644 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -124,6 +124,7 @@ platform_do_upgrade() { acer,predator-w6|\ acer,predator-w6d|\ acer,vero-w6m|\ + airpi,ap3000m|\ arcadyan,mozart|\ glinet,gl-mt2500|\ glinet,gl-mt6000|\ @@ -346,6 +347,7 @@ platform_copy_config() { acer,predator-w6|\ acer,predator-w6d|\ acer,vero-w6m|\ + airpi,ap3000m|\ arcadyan,mozart|\ glinet,gl-mt2500|\ glinet,gl-mt6000|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 3d6dd1ad23f..bd320ab343e 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -348,6 +348,20 @@ $(call Device/adtran_smartrg) endef TARGET_DEVICES += smartrg_sdg-8734 +define Device/airpi_ap3000m + DEVICE_VENDOR := Airpi + DEVICE_MODEL := AP3000M + DEVICE_DTS := mt7981b-airpi-ap3000m + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \ + kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += airpi_ap3000m + define Device/arcadyan_mozart DEVICE_VENDOR := Arcadyan DEVICE_MODEL := Mozart