From: Ziyue Zhang Date: Fri, 28 Nov 2025 10:49:26 +0000 (+0800) Subject: arm64: dts: qcom: qcs8300: enable pcie1 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7565ec0170201aca07c9e1c3b5b6f213c5024599;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: qcs8300: enable pcie1 Add configurations in devicetree for PCIe1, including registers, clocks, interrupts and phy setting sequence. Add PCIe lane equalization preset properties for 8 GT/s and 16GT/s. Acked-by: Konrad Dybcio Reviewed-by: Manivannan Sadhasivam Signed-off-by: Ziyue Zhang Link: https://lore.kernel.org/r/20251128104928.4070050-5-ziyue.zhang@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 994fbca4fcaee..31b4145a1d234 100644 --- a/arch/arm64/boot/dts/qcom/monaco.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -913,7 +913,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&pcie0_phy>, - <0>, + <&pcie1_phy>, <0>, <0>, <0>, @@ -2443,6 +2443,197 @@ status = "disabled"; }; + pcie1: pci@1c10000 { + device_type = "pci"; + compatible = "qcom,pcie-qcs8300", "qcom,pcie-sa8775p"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <4>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_anoc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0080 0x1>, + <0x100 &pcie_smmu 0x0081 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + operating-points-v2 = <&pcie1_opp_table>; + + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 1 x4 and GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 2 x4 */ + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 3 x4 and GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + + /* GEN 4 x4 */ + opp-64000000 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <7876000 1>; + }; + }; + + pcieport1: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + }; + }; + + pcie1_phy: phy@1c14000 { + compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; + reg = <0x0 0x01c14000 0x0 0x4000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>;