From: Oleksij Rempel Date: Tue, 30 May 2023 12:03:39 +0000 (+0200) Subject: ARM: dts: imx6dl: alti6p: fix different USB related warnings X-Git-Tag: v6.5-rc1~142^2~22^2~6 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=768b95f963b804dbaf559c61899abaae48bc9512;p=thirdparty%2Flinux.git ARM: dts: imx6dl: alti6p: fix different USB related warnings Fix USB-related warnings in imx6dl alti6p device tree by disabling unused usbphynop1 and usbphynop2 USB PHYs and properly configuring over-current detection on related ports. This fixes the following warnings with the current kernel: usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests imx_usb 2184200.usb: No over-current polarity defined Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e6a4e27706400..4989e8d069a1c 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -361,6 +361,7 @@ pinctrl-0 = <&pinctrl_usbh1>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; @@ -370,9 +371,18 @@ pinctrl-0 = <&pinctrl_usbotg>; phy_type = "utmi"; dr_mode = "host"; + over-current-active-low; status = "okay"; }; +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>;