From: Yann Collet Date: Sun, 24 Sep 2017 22:57:29 +0000 (-0700) Subject: added prototypes for advanced parameters for decompression API X-Git-Tag: v1.3.2~3^2~23^2~22 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7c3dea42cebf9a1c67136078988825a6ab22bee9;p=thirdparty%2Fzstd.git added prototypes for advanced parameters for decompression API required to decode custom formats --- diff --git a/doc/zstd_manual.html b/doc/zstd_manual.html index e7d861707..64870229b 100644 --- a/doc/zstd_manual.html +++ b/doc/zstd_manual.html @@ -27,8 +27,8 @@
  • Buffer-less and synchronous inner streaming functions
  • Buffer-less streaming compression (synchronous mode)
  • Buffer-less streaming decompression (synchronous mode)
    • -
  • ZSTD_CCtx_params
    • -
  • Block functions
    • +
  • === New advanced API (experimental) ===
    • +
  • === Block level API ===

    • Introduction

    @@ -399,7 +399,7 @@ size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
 size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
 size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
 
      These functions give the current memory usage of selected object.
-  Object memory usage can evolve if it's re-used multiple times. 
+  Object memory usage can evolve when re-used multiple times. 
 

    size_t ZSTD_estimateCCtxSize(int compressionLevel);
@@ -646,12 +646,12 @@ size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict*
   @return : 0, or an error code (which can be tested using ZSTD_isError())

    -

    Advanced Streaming decompression functions

    typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
-ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
+
    Advanced Streaming decompression functions
    ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
 ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize);    /**< same as ZSTD_initStaticDCtx() */
+typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
 size_t ZSTD_setDStreamParameter(ZSTD_DStream* zds, ZSTD_DStreamParameter_e paramType, unsigned paramValue);
-size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: a dict will not be used if dict == NULL or dictSize < 8 */
-size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict will just be referenced, and must outlive decompression session */
+size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
+size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict is referenced, it must outlive decompression session */
 size_t ZSTD_resetDStream(ZSTD_DStream* zds);  /**< re-use decompression parameters from previous init; saves dictionary loading */
 

    
 
    Buffer-less and synchronous inner streaming functions
    @@ -783,8 +783,29 @@ size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long
 

    
 
    typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e;
 

    
-
    New advanced API (experimental, and compression only)

    
+
    ===   New advanced API (experimental)  ===
    
+
+
    typedef enum {
+    ZSTD_f_zstd1 = 0,        /* Normal zstd frame format, specified in zstd_compression_format.md (default) */
+    ZSTD_f_zstd1_magicless,  /* Variant of zstd frame format, without initial 4-bytes magic number.
+                              * Useful to save 4 bytes per generated frame.
+                              * Decoder will not be able to recognise this format, requiring instructions. */
+    ZSTD_f_zstd1_headerless, /* Variant of zstd frame format, without any frame header;
+                              * Other metadata, like block size or frame checksum, are still generated.
+                              * Useful to save between 6 and ZSTD_frameHeaderSize_max bytes per generated frame.
+                              * However, required decoding parameters will have to be saved or known by some mechanism.
+                              * Decoder will not be able to recognise this format, requiring instructions and parameters. */
+    ZSTD_f_zstd1_block       /* Generate a zstd compressed block, without any metadata.
+                              * Note that size of block content must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB.
+                              * See ZSTD_compressBlock() for more details.
+                              * Resulting compressed block can be decoded with ZSTD_decompressBlock(). */
+} ZSTD_format_e;
+

    
 
    typedef enum {
+    /* compression format */
+    ZSTD_p_format = 10,      /* See ZSTD_format_e enum definition.
+                              * Cast selected format as unsigned for ZSTD_CCtx_setParameter() compatibility. */
+
     /* compression parameters */
     ZSTD_p_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
                               * Default level is ZSTD_CLEVEL_DEFAULT==3.
@@ -949,7 +970,7 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
 
    typedef enum {
     ZSTD_e_continue=0, /* collect more data, encoder transparently decides when to output result, for optimal conditions */
     ZSTD_e_flush,      /* flush any data provided so far - frame will continue, future data can still reference previous data for better compression */
-    ZSTD_e_end         /* flush any remaining data and ends current frame. Any future compression starts a new frame. */
+    ZSTD_e_end         /* flush any remaining data and close current frame. Any additional data starts a new frame. */
 } ZSTD_EndDirective;
 

    
 
    size_t ZSTD_compress_generic (ZSTD_CCtx* cctx,
@@ -959,8 +980,8 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
 
      Behave about the same as ZSTD_compressStream. To note :
   - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_setParameter()
   - Compression parameters cannot be changed once compression is started.
-  - *dstPos must be <= dstCapacity, *srcPos must be <= srcSize
-  - *dspPos and *srcPos will be updated. They are guaranteed to remain below their respective limit.
+  - outpot->pos must be <= dstCapacity, input->pos must be <= srcSize
+  - outpot->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
   - @return provides the minimum amount of data still to flush from internal buffers
             or an error code, which can be tested using ZSTD_isError().
             if @return != 0, flush is not fully completed, there is some data left within internal buffers.
@@ -976,6 +997,7 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
   Useful after an error, or to interrupt an ongoing compression job and start a new one.
   Any internal data not yet flushed is cancelled.
   Dictionary (if any) is dropped.
+  All parameters are back to default values.
   It's possible to modify compression parameters after a reset.
  
 

    
@@ -987,26 +1009,30 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
                 ZSTD_EndDirective endOp);
 
      Same as ZSTD_compress_generic(),
   but using only integral types as arguments.
-  Argument list is larger and less expressive than ZSTD_{in,out}Buffer,
+  Argument list is larger than ZSTD_{in,out}Buffer,
   but can be helpful for binders from dynamic languages
   which have troubles handling structures containing memory pointers.
  
 

    
 
-
    ZSTD_CCtx_params
    +
    ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
+
      Quick howto :
   - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
-  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into an
-  existing ZSTD_CCtx_params structure. This is similar to
-  ZSTD_CCtx_setParameter().
-  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to an existing CCtx. These
-  parameters will be applied to all subsequent compression jobs.
+  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into
+                                    an existing ZSTD_CCtx_params structure.
+                                    This is similar to
+                                    ZSTD_CCtx_setParameter().
+  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+                                    an existing CCtx.
+                                    These parameters will be applied to
+                                    all subsequent compression jobs.
   - ZSTD_compress_generic() : Do compression using the CCtx.
   - ZSTD_freeCCtxParams() : Free the memory.
 
-  This can be used with ZSTD_estimateCCtxSize_opaque() for static allocation
-  for single-threaded compression.
+  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+  for static allocation for single-threaded compression.
  
-
    
+

    
 
 
    size_t ZSTD_resetCCtxParams(ZSTD_CCtx_params* params);
 
      Reset params to default, with the default compression level.
@@ -1030,22 +1056,84 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
   Set one compression parameter, selected by enum ZSTD_cParameter.
   Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
   Note : when `value` is an enum, cast it to unsigned for proper type checking.
-  @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ @result : 0, or an error code (which can be tested with ZSTD_isError()).
  
 

    
 
 
    size_t ZSTD_CCtx_setParametersUsingCCtxParams(
         ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
-
     Apply a set of ZSTD_CCtx_params to the compression context.
- This must be done before the dictionary is loaded.
- The pledgedSrcSize is treated as unknown.
- Multithreading parameters are applied only if nbThreads > 1.
+
      Apply a set of ZSTD_CCtx_params to the compression context.
+  This must be done before the dictionary is loaded.
+  The pledgedSrcSize is treated as unknown.
+  Multithreading parameters are applied only if nbThreads > 1.
+ 
+

    
+
+
    Advanced parameters for decompression API

    
+
    size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictMode_e dictMode);
+
      Create an internal DDict from dict buffer,
+  to be used to decompress next frames.
+ @result : 0, or an error code (which can be tested with ZSTD_isError()).
+  Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+            meaning "return to no-dictionary mode".
+  Note 1 : `dict` content will be copied internally.
+            Use ZSTD_DCtx_loadDictionary_byReference()
+            to reference dictionary content instead.
+            In which case, the dictionary buffer must outlive its users.
+  Note 2 : Loading a dictionary involves building tables,
+           which has a non-negligible impact on CPU usage and latency.
+  Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to select
+           how dictionary content will be interpreted and loaded.
+ 
+

    
+
+
    size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
      Reference a prepared dictionary, to be used to decompress next frames.
+  The dictionary remains active for decompression of future frames using same DCtx.
+ @result : 0, or an error code (which can be tested with ZSTD_isError()).
+  Note 1 : Currently, only one dictionary can be managed.
+           Referencing a new dictionary effectively "discards" any previous one.
+  Special : adding a NULL DDict means "return to no-dictionary mode".
+  Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ 
+

    
+
+
    size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize);
+size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictMode_e dictMode);
+
      Reference a prefix (single-usage dictionary) for next compression job.
+  Prefix is **only used once**. It must be explicitly referenced before each frame.
+  If there is a need to use same prefix multiple times, consider embedding it into a ZSTD_DDict instead.
+ @result : 0, or an error code (which can be tested with ZSTD_isError()).
+  Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+  Note 2 : Prefix buffer is referenced. It must outlive compression job.
+  Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
+           Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode.
+  Note 4 : Referencing a raw content prefix costs almost nothing cpu and memory wise.
+ 
+

    
+
+
    size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
      Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+  This is useful to prevent a decoder context from reserving too much memory for itself (potential attack scenario).
+  This parameter is only useful in streaming mode, since no internal buffer is allocated in direct mode.
+  By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_MAX)
+ @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ 
+

    
+
+
    size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
      Instruct the decoder context about what kind of data to decode next.
+  This instruction is mandatory to decode data without a fully-formed header,
+  such ZSTD_f_zstd1_magicless for example.
+ @return : 0, or an error code (which can be tested using ZSTD_isError()).
  
 

    
 
-
    Block functions
    -    Block functions produce and decode raw zstd blocks, without frame metadata.
-    Frame metadata cost is typically ~18 bytes, which can be non-negligible for very small blocks (< 100 bytes).
+
    ===   Block level API  ===
    
+
+
        Frame metadata cost is typically ~18 bytes, which can be non-negligible for very small blocks (< 100 bytes).
     User will have to take in charge required information to regenerate data, such as compressed and content sizes.
 
     A few rules to respect :
@@ -1055,7 +1143,7 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
       + compression : any ZSTD_compressBegin*() variant, including with dictionary
       + decompression : any ZSTD_decompressBegin*() variant, including with dictionary
       + copyCCtx() and copyDCtx() can be used too
-    - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX
+    - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB
       + If input is larger than a block size, it's necessary to split input data into multiple blocks
       + For inputs larger than a single block size, consider using the regular ZSTD_compress() instead.
         Frame metadata is not that costly, and quickly becomes negligible as source size grows larger.
@@ -1066,7 +1154,7 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t
       + In case of multiple successive blocks, should some of them be uncompressed,
         decoder must be informed of their existence in order to follow proper history.
         Use ZSTD_insertBlock() for such a case.
-
    
+

    
 
 
    Raw zstd block functions
    size_t ZSTD_getBlockSize   (const ZSTD_CCtx* cctx);
 size_t ZSTD_compressBlock  (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
diff --git a/lib/common/zstd_internal.h b/lib/common/zstd_internal.h
index cd0dbcc27..8a24d42f2 100644
--- a/lib/common/zstd_internal.h
+++ b/lib/common/zstd_internal.h
@@ -282,6 +282,7 @@ typedef struct {
 } ZSTD_entropyCTables_t;
 
 struct ZSTD_CCtx_params_s {
+    ZSTD_format_e format;
     ZSTD_compressionParameters cParams;
     ZSTD_frameParameters fParams;
 
diff --git a/lib/compress/zstd_compress.c b/lib/compress/zstd_compress.c
index c58d30442..88eb51dcb 100644
--- a/lib/compress/zstd_compress.c
+++ b/lib/compress/zstd_compress.c
@@ -256,6 +256,9 @@ size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, unsigned v
 
     switch(param)
     {
+    case ZSTD_p_format :
+        return ZSTD_CCtxParam_setParameter(&cctx->requestedParams, param, value);
+
     case ZSTD_p_compressionLevel:
         if (value == 0) return 0;  /* special value : 0 means "don't change anything" */
         if (cctx->cdict) return ERROR(stage_wrong);
@@ -326,6 +329,12 @@ size_t ZSTD_CCtxParam_setParameter(
 {
     switch(param)
     {
+    case ZSTD_p_format :
+        if (value > (unsigned)ZSTD_f_zstd1_block)
+            return ERROR(parameter_unsupported);
+        params->format = (ZSTD_format_e)value;
+        return 0;
+
     case ZSTD_p_compressionLevel :
         if ((int)value > ZSTD_maxCLevel()) value = ZSTD_maxCLevel();
         if (value == 0) return 0;
diff --git a/lib/zstd.h b/lib/zstd.h
index 81158a20b..655fa29d3 100644
--- a/lib/zstd.h
+++ b/lib/zstd.h
@@ -486,7 +486,7 @@ ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
 
 /*! ZSTD_sizeof_*() :
  *  These functions give the current memory usage of selected object.
- *  Object memory usage can evolve if it's re-used multiple times. */
+ *  Object memory usage can evolve when re-used multiple times. */
 ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
 ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
 ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
@@ -747,12 +747,12 @@ ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledg
 
 
 /*=====   Advanced Streaming decompression functions  =====*/
-typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
 ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
 ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize);    /**< same as ZSTD_initStaticDCtx() */
+typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
 ZSTDLIB_API size_t ZSTD_setDStreamParameter(ZSTD_DStream* zds, ZSTD_DStreamParameter_e paramType, unsigned paramValue);
-ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: a dict will not be used if dict == NULL or dictSize < 8 */
-ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict will just be referenced, and must outlive decompression session */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict is referenced, it must outlive decompression session */
 ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);  /**< re-use decompression parameters from previous init; saves dictionary loading */
 
 
@@ -908,17 +908,17 @@ ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx);
 
 
 
-/*===   New advanced API (experimental, and compression only)  ===*/
+/** ===   New advanced API (experimental)  === **/
 
 /* notes on API design :
- *   In this proposal, parameters are pushed one by one into an existing CCtx,
+ *   In this proposal, parameters are pushed one by one into an existing context,
  *   and then applied on all subsequent compression jobs.
  *   When no parameter is ever provided, CCtx is created with compression level ZSTD_CLEVEL_DEFAULT.
  *
  *   This API is intended to replace all others experimental API.
  *   It can basically do all other use cases, and even new ones.
- *   It stands a good chance to become "stable",
- *   after a reasonable testing period.
+ *   In constrast with _advanced() variants, it stands a reasonable chance to become "stable",
+ *   after a testing period.
  */
 
 /* note on naming convention :
@@ -934,19 +934,25 @@ ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx);
  * All enum will be manually set to explicit values before reaching "stable API" status */
 
 typedef enum {
-    ZSTD_f_zstd1,            /* Normal (default) zstd frame format, as specified in zstd_compression_format.md */
-    ZSTD_f_zstd1_magicLess,  /* Almost zstd frame format, but without initial 4-bytes magic number */
-    ZSTD_f_zstd1_headerless, /* Almost zstd frame format, but without any frame header;
-                              * Other metadata, like block size or frame checksum, are still generated */
-    ZSTD_f_zstd_block        /* Pure zstd compressed block, without any metadata.
-                              * Note that size of uncompressed block must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB.
-                              * See ZSTD_compressBlock() for more details. */
-} ZSTD_format;
+    ZSTD_f_zstd1 = 0,        /* Normal zstd frame format, specified in zstd_compression_format.md (default) */
+    ZSTD_f_zstd1_magicless,  /* Variant of zstd frame format, without initial 4-bytes magic number.
+                              * Useful to save 4 bytes per generated frame.
+                              * Decoder will not be able to recognise this format, requiring instructions. */
+    ZSTD_f_zstd1_headerless, /* Variant of zstd frame format, without any frame header;
+                              * Other metadata, like block size or frame checksum, are still generated.
+                              * Useful to save between 6 and ZSTD_frameHeaderSize_max bytes per generated frame.
+                              * However, required decoding parameters will have to be saved or known by some mechanism.
+                              * Decoder will not be able to recognise this format, requiring instructions and parameters. */
+    ZSTD_f_zstd1_block       /* Generate a zstd compressed block, without any metadata.
+                              * Note that size of block content must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB.
+                              * See ZSTD_compressBlock() for more details.
+                              * Resulting compressed block can be decoded with ZSTD_decompressBlock(). */
+} ZSTD_format_e;
 
 typedef enum {
     /* compression format */
-    ZSTD_p_format = 10,      /* See ZSTD_format enum definition.
-                              * Cast selected strategy as unsigned for ZSTD_CCtx_setParameter() compatibility. */
+    ZSTD_p_format = 10,      /* See ZSTD_format_e enum definition.
+                              * Cast selected format as unsigned for ZSTD_CCtx_setParameter() compatibility. */
 
     /* compression parameters */
     ZSTD_p_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
@@ -1116,15 +1122,15 @@ ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* pre
 typedef enum {
     ZSTD_e_continue=0, /* collect more data, encoder transparently decides when to output result, for optimal conditions */
     ZSTD_e_flush,      /* flush any data provided so far - frame will continue, future data can still reference previous data for better compression */
-    ZSTD_e_end         /* flush any remaining data and ends current frame. Any future compression starts a new frame. */
+    ZSTD_e_end         /* flush any remaining data and close current frame. Any additional data starts a new frame. */
 } ZSTD_EndDirective;
 
 /*! ZSTD_compress_generic() :
  *  Behave about the same as ZSTD_compressStream. To note :
  *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_setParameter()
  *  - Compression parameters cannot be changed once compression is started.
- *  - *dstPos must be <= dstCapacity, *srcPos must be <= srcSize
- *  - *dspPos and *srcPos will be updated. They are guaranteed to remain below their respective limit.
+ *  - outpot->pos must be <= dstCapacity, input->pos must be <= srcSize
+ *  - outpot->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
  *  - @return provides the minimum amount of data still to flush from internal buffers
  *            or an error code, which can be tested using ZSTD_isError().
  *            if @return != 0, flush is not fully completed, there is some data left within internal buffers.
@@ -1143,6 +1149,7 @@ ZSTDLIB_API size_t ZSTD_compress_generic (ZSTD_CCtx* cctx,
  *  Useful after an error, or to interrupt an ongoing compression job and start a new one.
  *  Any internal data not yet flushed is cancelled.
  *  Dictionary (if any) is dropped.
+ *  All parameters are back to default values.
  *  It's possible to modify compression parameters after a reset.
  */
 ZSTDLIB_API void ZSTD_CCtx_reset(ZSTD_CCtx* cctx);   /* Not ready yet ! */
@@ -1151,7 +1158,7 @@ ZSTDLIB_API void ZSTD_CCtx_reset(ZSTD_CCtx* cctx);   /* Not ready yet ! */
 /*! ZSTD_compress_generic_simpleArgs() :
  *  Same as ZSTD_compress_generic(),
  *  but using only integral types as arguments.
- *  Argument list is larger and less expressive than ZSTD_{in,out}Buffer,
+ *  Argument list is larger than ZSTD_{in,out}Buffer,
  *  but can be helpful for binders from dynamic languages
  *  which have troubles handling structures containing memory pointers.
  */
@@ -1162,19 +1169,22 @@ size_t ZSTD_compress_generic_simpleArgs (
                             ZSTD_EndDirective endOp);
 
 
-/** ZSTD_CCtx_params
- *
+/*! ZSTD_CCtx_params :
+ *  Quick howto :
  *  - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
- *  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into an
- *  existing ZSTD_CCtx_params structure. This is similar to
- *  ZSTD_CCtx_setParameter().
- *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to an existing CCtx. These
- *  parameters will be applied to all subsequent compression jobs.
+ *  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into
+ *                                    an existing ZSTD_CCtx_params structure.
+ *                                    This is similar to
+ *                                    ZSTD_CCtx_setParameter().
+ *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+ *                                    an existing CCtx.
+ *                                    These parameters will be applied to
+ *                                    all subsequent compression jobs.
  *  - ZSTD_compress_generic() : Do compression using the CCtx.
  *  - ZSTD_freeCCtxParams() : Free the memory.
  *
- *  This can be used with ZSTD_estimateCCtxSize_opaque() for static allocation
- *  for single-threaded compression.
+ *  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+ *  for static allocation for single-threaded compression.
  */
 ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
 
@@ -1202,22 +1212,96 @@ ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);
  *  Set one compression parameter, selected by enum ZSTD_cParameter.
  *  Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
  *  Note : when `value` is an enum, cast it to unsigned for proper type checking.
- *  @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  */
 ZSTDLIB_API size_t ZSTD_CCtxParam_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, unsigned value);
 
 /*! ZSTD_CCtx_setParametersUsingCCtxParams() :
- * Apply a set of ZSTD_CCtx_params to the compression context.
- * This must be done before the dictionary is loaded.
- * The pledgedSrcSize is treated as unknown.
- * Multithreading parameters are applied only if nbThreads > 1.
+ *  Apply a set of ZSTD_CCtx_params to the compression context.
+ *  This must be done before the dictionary is loaded.
+ *  The pledgedSrcSize is treated as unknown.
+ *  Multithreading parameters are applied only if nbThreads > 1.
  */
 ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
         ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
 
-/**
-    Block functions
 
+/*===   Advanced parameters for decompression API  ===*/
+
+/* The following parameters must be set after creating a ZSTD_DCtx* (or ZSTD_DStream*) object,
+ * but before starting decompression of a frame.
+ */
+
+/*! ZSTD_DCtx_loadDictionary() :
+ *  Create an internal DDict from dict buffer,
+ *  to be used to decompress next frames.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+ *            meaning "return to no-dictionary mode".
+ *  Note 1 : `dict` content will be copied internally.
+ *            Use ZSTD_DCtx_loadDictionary_byReference()
+ *            to reference dictionary content instead.
+ *            In which case, the dictionary buffer must outlive its users.
+ *  Note 2 : Loading a dictionary involves building tables,
+ *           which has a non-negligible impact on CPU usage and latency.
+ *  Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to select
+ *           how dictionary content will be interpreted and loaded.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictMode_e dictMode);
+
+
+/*! ZSTD_DCtx_refDDict() :
+ *  Reference a prepared dictionary, to be used to decompress next frames.
+ *  The dictionary remains active for decompression of future frames using same DCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Special : adding a NULL DDict means "return to no-dictionary mode".
+ *  Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+
+/*! ZSTD_DCtx_refPrefix() :
+ *  Reference a prefix (single-usage dictionary) for next compression job.
+ *  Prefix is **only used once**. It must be explicitly referenced before each frame.
+ *  If there is a need to use same prefix multiple times, consider embedding it into a ZSTD_DDict instead.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+ *  Note 2 : Prefix buffer is referenced. It must outlive compression job.
+ *  Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
+ *           Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode.
+ *  Note 4 : Referencing a raw content prefix costs almost nothing cpu and memory wise.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize);
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictMode_e dictMode);
+
+
+/*! ZSTD_DCtx_setMaxWindowSize() :
+ *  Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+ *  This is useful to prevent a decoder context from reserving too much memory for itself (potential attack scenario).
+ *  This parameter is only useful in streaming mode, since no internal buffer is allocated in direct mode.
+ *  By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_MAX)
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
+
+/*! ZSTD_DCtx_setFormat() :
+ *  Instruct the decoder context about what kind of data to decode next.
+ *  This instruction is mandatory to decode data without a fully-formed header,
+ *  such ZSTD_f_zstd1_magicless for example.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
+
+
+/** ===   Block level API  === **/
+
+/*!
     Block functions produce and decode raw zstd blocks, without frame metadata.
     Frame metadata cost is typically ~18 bytes, which can be non-negligible for very small blocks (< 100 bytes).
     User will have to take in charge required information to regenerate data, such as compressed and content sizes.