From: Ioana Ciornei <ioana.ciornei@nxp.com>
Date: Tue, 14 Oct 2025 15:53:57 +0000 (+0300)
Subject: arm64: dts: lx2160a-rdb: fully describe the two SFP+ cages
X-Git-Tag: v6.19-rc1~100^2~20^2~96
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7c9f33d0abe9b924333987ee1ee52eceda702592;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: lx2160a-rdb: fully describe the two SFP+ cages

Describe the two SFP+ cages found on the LX2160ARDB board with their
respective I2C buses and GPIO lines.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 15ff503dcef3d..935f421475acb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -31,6 +31,28 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		maximum-power-milliwatt = <2000>;
+		/* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */
+		/* tx-disable-gpios = <&sfp2_csr 0 GPIO_ACTIVE_HIGH>; */
+		los-gpios = <&sfp2_csr 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp2_csr 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp2_csr 7 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp3: sfp-3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp3_i2c>;
+		maximum-power-milliwatt = <2000>;
+		/* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */
+		/* tx-disable-gpios = <&sfp3_csr 0 GPIO_ACTIVE_HIGH>; */
+		los-gpios = <&sfp3_csr 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp3_csr 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp3_csr 7 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &crypto {
@@ -236,6 +258,31 @@
 				vcc-supply = <&sb_3v3>;
 			};
 		};
+
+		i2c@7 {
+			reg = <0x7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@75 {
+				compatible = "nxp,pca9547";
+				reg = <0x75>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sfp2_i2c: i2c@4 {
+					reg = <0x4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				sfp3_i2c: i2c@5 {
+					reg = <0x5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
 	};
 };