From: Sherry Sun <sherry.sun@nxp.com>
Date: Wed, 22 Apr 2026 09:35:49 +0000 (+0800)
Subject: arm64: dts: imx95: Add Root Port node and PERST property
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7db62ff5f4f4388ec2d07c4d460840557cb0c7ab;p=thirdparty%2Flinux.git

arm64: dts: imx95: Add Root Port node and PERST property

Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index e4649d7f9122..7d820a0f80b2 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -553,6 +553,7 @@
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_m2_pwr>;
 	vpcie3v3aux-supply = <&reg_m2_pwr>;
@@ -567,6 +568,10 @@
 	status = "disabled";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
 &sai1 {
 	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
 			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 49400bc9ba91..2e463bc7c601 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -540,6 +540,7 @@
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
 	vpcie3v3aux-supply = <&reg_pcie0>;
@@ -554,9 +555,14 @@
 	status = "disabled";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	pinctrl-names = "default";
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_slot_pwr>;
 	vpcie3v3aux-supply = <&reg_slot_pwr>;
@@ -570,6 +576,10 @@
 	status = "disabled";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+};
+
 &sai1 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 3e35c956a4d7..d2aa6e543a09 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1974,6 +1974,17 @@
 			iommu-map-mask = <0x1ff>;
 			fsl,max-link-speed = <3>;
 			status = "disabled";
+
+			pcie0_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_ep: pcie-ep@4c300000 {
@@ -2051,6 +2062,17 @@
 			iommu-map-mask = <0x1ff>;
 			fsl,max-link-speed = <3>;
 			status = "disabled";
+
+			pcie1_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_ep: pcie-ep@4c380000 {