From: Romain Gantois Date: Thu, 26 Jun 2025 16:20:24 +0000 (+0200) Subject: net: phy: dp83867: Allow excluding driver from SPL X-Git-Tag: v2025.10-rc1~117^2~1 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7eaa8aaa9a5930f75cc32a914b706869ad679f5c;p=thirdparty%2Fu-boot.git net: phy: dp83867: Allow excluding driver from SPL The DP83867 PHY driver is used by the BeagleBoneGreen Eco board, but adding it to the am335x-evm defconfig causes SPL to overflow its size limits. Add a separate option to enable this driver in SPL, so that it can be enabled in U-Boot without adding unnecessary volume to SPL. Signed-off-by: Romain Gantois Tested-by: Judith Mendez --- diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3132718e4f8..8d88c142900 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -314,6 +314,10 @@ config PHY_TI_DP83867 ---help--- Adds support for the TI DP83867 1Gbit PHY. +config SPL_PHY_TI_DP83867 + select PHY_TI + bool "Texas Instruments Ethernet DP83867 PHY support (SPL)" + config PHY_TI_DP83869 select PHY_TI bool "Texas Instruments Ethernet DP83869 PHY support" diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 2487f366e1c..a119eb5e177 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.o obj-$(CONFIG_PHY_TI_GENERIC) += ti_phy_init.o -obj-$(CONFIG_PHY_TI_DP83867) += dp83867.o +obj-$(CONFIG_$(PHASE_)PHY_TI_DP83867) += dp83867.o obj-$(CONFIG_PHY_TI_DP83869) += dp83869.o obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o