From: Niklas Cassel Date: Wed, 25 Jun 2025 10:23:51 +0000 (+0200) Subject: PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=80dc18a0cba8dea42614f021b20a04354b213d86;p=thirdparty%2Flinux.git PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request. Add this delay in dw_pcie_wait_for_link(), after the link is reported as up. The delay will only be performed in the success case where the link came up. DWC glue drivers that have a link up IRQ (drivers that set use_linkup_irq = true) do not call dw_pcie_wait_for_link(), instead they perform this delay in their threaded link up IRQ handler. Signed-off-by: Niklas Cassel Signed-off-by: Manivannan Sadhasivam Reviewed-by: Damien Le Moal Reviewed-by: Wilfred Mallawa Link: https://patch.msgid.link/20250625102347.1205584-14-cassel@kernel.org --- diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 4d794964fa0fd..053e9c5404395 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -714,6 +714,14 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci) return -ETIMEDOUT; } + /* + * As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link + * speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms + * after Link training completes before sending a Configuration Request. + */ + if (pci->max_link_speed > 2) + msleep(PCIE_RESET_CONFIG_WAIT_MS); + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); val = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);