From: Mike Brady Date: Sun, 29 May 2016 11:08:53 +0000 (+0100) Subject: Change sample values to numbers X-Git-Tag: 2.8.5~12 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=80f1f528facfaf8db5bc27ff06234516b4af8efb;p=thirdparty%2Fshairport-sync.git Change sample values to numbers Change `socket_port` and `socket_msglength` sample values to numbers, not strings --- diff --git a/scripts/shairport-sync.conf b/scripts/shairport-sync.conf index 7d639f51..647abf16 100644 --- a/scripts/shairport-sync.conf +++ b/scripts/shairport-sync.conf @@ -37,8 +37,8 @@ metadata = // pipe_name = "/tmp/shairport-sync-metadata"; // pipe_timeout = 5000; // wait for this number of milliseconds for a blocked pipe to unblock before giving up // socket_address = "226.0.0.1"; // if set to a host name or IP address, UDP packets containing metadata will be sent to this address. May be a multicast address. "socket-port" must be non-zero and "enabled" must be set to yes" -// socket_port = "5555"; // if socket_address is set, the port to send UDP packets to -// socket_msglength = "65000"; // the maximum packet size for any UDP metadata. This will be clipped to be between 500 or 65000. The default is 500. +// socket_port = 5555; // if socket_address is set, the port to send UDP packets to +// socket_msglength = 65000; // the maximum packet size for any UDP metadata. This will be clipped to be between 500 or 65000. The default is 500. }; // Advanced parameters for controlling how a Shairport Sync runs