From: Ernest Van Hoecke Date: Tue, 27 Jan 2026 10:14:12 +0000 (+0100) Subject: board: toradex: aquila-am69: Remove ETH_1 MCU_CLKOUT0 X-Git-Tag: v2026.04-rc2~27^2 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=81cd740838b1fdc6c473580254f0f217df375bcc;p=thirdparty%2Fu-boot.git board: toradex: aquila-am69: Remove ETH_1 MCU_CLKOUT0 On the Toradex Aquila AM69 V1.1, the on-module ETH_1 relies on an external 25 MHz crystal oscillator. On the V1.0, we needed to enable MCU_CLKOUT0, but support for this was already dropped from the device tree before being sent to U-Boot. Remove this obsolete enabling of MCU_CLKOUT0. Fixes: 3f0528882c0d ("board: toradex: add aquila am69 support") Signed-off-by: Ernest Van Hoecke Reviewed-by: Francesco Dolcini --- diff --git a/board/toradex/aquila-am69/aquila-am69.c b/board/toradex/aquila-am69/aquila-am69.c index 98b9bfc5aa4..e0975d5bc6f 100644 --- a/board/toradex/aquila-am69/aquila-am69.c +++ b/board/toradex/aquila-am69/aquila-am69.c @@ -22,8 +22,6 @@ #include "ddrs_patch.h" #define CTRL_MMR_CFG0_MCU_ADC1_CTRL 0x40F040B4 -#define CTRL_MMR_CFG0_MCU_CLKOUT0_CTRL 0x40F08010 -#define MCU_CLKOUT0_CTRL_CLK_EN BIT(4) #define HW_CFG_MEM_SZ_32GB 0x00 #define HW_CFG_MEM_SZ_16GB 0x01 @@ -200,9 +198,4 @@ void spl_board_init(void) if (ret) printf("ESM PMIC init failed: %d\n", ret); } - - if (IS_ENABLED(CONFIG_TARGET_AQUILA_AM69_R5)) - writel(readl(CTRL_MMR_CFG0_MCU_CLKOUT0_CTRL) | - MCU_CLKOUT0_CTRL_CLK_EN, - CTRL_MMR_CFG0_MCU_CLKOUT0_CTRL); }