From: Chen-Yu Tsai Date: Sat, 28 Jun 2025 16:16:06 +0000 (+0800) Subject: arm64: dts: allwinner: a523: Move rgmii0 pins to correct location X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=84c4a16e00f5aadbb1a3bdecc6bbfee35b7c45c8;p=thirdparty%2Flinux.git arm64: dts: allwinner: a523: Move rgmii0 pins to correct location Nodes are supposed to be sorted by address, or if no addresses apply, by node name. The rgmii0 pins are out of order, possibly due to multiple patches adding pin mux settings conflicting. Move the rgmii0 pins to the correct location. Reviewed-by: Andre Przywara Link: https://patch.msgid.link/20250628161608.3072968-4-wens@kernel.org Signed-off-by: Chen-Yu Tsai --- diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 458d7ecedacd4..30613a0b1124e 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -126,16 +126,6 @@ interrupt-controller; #interrupt-cells = <3>; - rgmii0_pins: rgmii0-pins { - pins = "PH0", "PH1", "PH2", "PH3", "PH4", - "PH5", "PH6", "PH7", "PH9", "PH10", - "PH14", "PH15", "PH16", "PH17", "PH18"; - allwinner,pinmux = <5>; - function = "emac0"; - drive-strength = <40>; - bias-disable; - }; - mmc0_pins: mmc0-pins { pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; allwinner,pinmux = <2>; @@ -163,6 +153,16 @@ bias-pull-up; }; + rgmii0_pins: rgmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10", + "PH14", "PH15", "PH16", "PH17", "PH18"; + allwinner,pinmux = <5>; + function = "emac0"; + drive-strength = <40>; + bias-disable; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; allwinner,pinmux = <2>;