From: Ming Wang Date: Fri, 6 Feb 2026 09:04:53 +0000 (+0800) Subject: arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=861a9593e10bb6ab2a492b315c8a2a3aad70ac00;p=thirdparty%2Fkernel%2Fstable.git arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi The AP6212 WiFi/BT module on the LCKFB TaiShan Pi (RK3566) is prone to communication timeouts and reset failures (error -110) when operating at 3 Mbps. This patch stabilizes the Bluetooth interface by: 1. Updating the compatible string to 'brcm,bcm43430a1-bt' to better reflect the actual chip revision used in the AP6212 module. 2. Lowering the maximum UART baud rate from 3,000,000 to 1,500,000 bps. Tests show that 1.5 Mbps is the reliable upper limit for this board's UART configuration, eliminating the initialization timeouts. Fixes: 251e5ade9ba4 ("arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566") Signed-off-by: Ming Wang Link: https://patch.msgid.link/20260206090453.1041919-1-wming126@126.com Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts index ed65d3120444..18a560a6e2a4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts @@ -635,10 +635,10 @@ status = "okay"; bluetooth: bluetooth { - compatible = "brcm,bcm43438-bt"; + compatible = "brcm,bcm43430a1-bt"; clocks = <&rk809 1>; clock-names = "lpo"; - max-speed = <3000000>; + max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;