From: Sean Anderson <sean.anderson@linux.dev>
Date: Thu, 16 Jan 2025 22:41:30 +0000 (-0500)
Subject: spi: zynqmp-gqspi: Always acknowledge interrupts
X-Git-Tag: v6.15-rc1~182^2~38^2
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89785306453ce6d949e783f6936821a0b7649ee2;p=thirdparty%2Flinux.git

spi: zynqmp-gqspi: Always acknowledge interrupts

RXEMPTY can cause an IRQ, even though we may not do anything about it
(such as if we are waiting for more received data). We must still handle
these IRQs because we can tell they were caused by the device.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250116224130.2684544-6-sean.anderson@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index fb08dd29e5905..1b0c8ea7afa8f 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -806,7 +806,6 @@ static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
 static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
 {
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_id;
-	irqreturn_t ret = IRQ_NONE;
 	u32 status, mask, dma_status = 0;
 
 	status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
@@ -821,27 +820,24 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
 				   dma_status);
 	}
 
-	if (mask & GQSPI_ISR_TXNOT_FULL_MASK) {
+	if (!mask && !dma_status)
+		return IRQ_NONE;
+
+	if (mask & GQSPI_ISR_TXNOT_FULL_MASK)
 		zynqmp_qspi_filltxfifo(xqspi, GQSPI_TX_FIFO_FILL);
-		ret = IRQ_HANDLED;
-	}
 
-	if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK) {
+	if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK)
 		zynqmp_process_dma_irq(xqspi);
-		ret = IRQ_HANDLED;
-	} else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
-			(mask & GQSPI_IER_GENFIFOEMPTY_MASK)) {
+	else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
+			(mask & GQSPI_IER_GENFIFOEMPTY_MASK))
 		zynqmp_qspi_readrxfifo(xqspi, GQSPI_RX_FIFO_FILL);
-		ret = IRQ_HANDLED;
-	}
 
 	if (xqspi->bytes_to_receive == 0 && xqspi->bytes_to_transfer == 0 &&
 	    ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
 		zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
 		complete(&xqspi->data_completion);
-		ret = IRQ_HANDLED;
 	}
-	return ret;
+	return IRQ_HANDLED;
 }
 
 /**