From: Chintan Vankar <c-vankar@ti.com>
Date: Wed, 9 Jul 2025 10:53:26 +0000 (+0530)
Subject: arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89a0284bf92e498c8d24a4ce37949eaf4a5101a9;p=thirdparty%2Flinux.git

arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to required nodes to enable Ethernet boot
for SK-AM69.

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20250709105326.232608-5-c-vankar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index f28375629739c..a09dcb812648f 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -568,6 +568,7 @@
 			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
 			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio-default-pins {
@@ -575,6 +576,7 @@
 			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
 			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
@@ -630,6 +632,14 @@
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &mailbox0_cluster0 {
 	status = "okay";
 	interrupts = <436>;
@@ -968,6 +978,7 @@
 &davinci_mdio {
 	mcu_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -978,6 +989,7 @@
 	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&mcu_phy0>;
+	bootph-all;
 };
 
 &mcu_r5fss0_core0 {