From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 14 May 2026 20:02:00 +0000 (+0200)
Subject: airoha: an7581: move internal PHY interrupt to specific device DTS
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89d8dc13d066e5dc44586e3db670cb8daabf7c23;p=thirdparty%2Fopenwrt.git

airoha: an7581: move internal PHY interrupt to specific device DTS

It was discovered that the internal PHY interrupt are not always connected
and PHY link up/down is not correctly detected.

This is the case of the Nokia Valyrian board that suffer from this problem.

To handle this, drop the internal PHY interrupt property from DTSI and add
it only to the Gemtek W1700K DTS where it was reported to work correctly.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

diff --git a/target/linux/airoha/dts/an7581-w1700k-ubi.dts b/target/linux/airoha/dts/an7581-w1700k-ubi.dts
index 1ec5f0320a6..f845dcad869 100644
--- a/target/linux/airoha/dts/an7581-w1700k-ubi.dts
+++ b/target/linux/airoha/dts/an7581-w1700k-ubi.dts
@@ -375,6 +375,7 @@
 
 &gsw_phy1 {
 	status = "okay";
+	interrupts = <1>;
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp1_led0_pins>;
 };
@@ -386,6 +387,7 @@
 
 &gsw_phy2 {
 	status = "okay";
+	interrupts = <2>;
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp2_led0_pins>;
 };
diff --git a/target/linux/airoha/dts/an7581.dtsi b/target/linux/airoha/dts/an7581.dtsi
index c00eaa5c324..efbb4ca54e4 100644
--- a/target/linux/airoha/dts/an7581.dtsi
+++ b/target/linux/airoha/dts/an7581.dtsi
@@ -1056,7 +1056,6 @@
 				gsw_phy1: ethernet-phy@9 {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <9>;
-					interrupts = <1>;
 					phy-mode = "internal";
 					status = "disabled";
 
@@ -1079,7 +1078,6 @@
 				gsw_phy2: ethernet-phy@a {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <10>;
-					interrupts = <2>;
 					phy-mode = "internal";
 					status = "disabled";
 
@@ -1102,7 +1100,6 @@
 				gsw_phy3: ethernet-phy@b {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <11>;
-					interrupts = <3>;
 					phy-mode = "internal";
 					status = "disabled";
 
@@ -1125,7 +1122,6 @@
 				gsw_phy4: ethernet-phy@c {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <12>;
-					interrupts = <4>;
 					phy-mode = "internal";
 					status = "disabled";