From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 08:32:03 +0000 (+0300) Subject: arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex X-Git-Tag: v6.1-rc1~154^2~9^2~99 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8a8531e69b2db1df8bfcf66c990ba36919c48e21;p=thirdparty%2Flinux.git arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-11-krzysztof.kozlowski@linaro.org --- diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 98d34b5e1df2c..cff96cbbdf282 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2627,7 +2627,12 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + reg = <0 0x01f40000 0 0x20000>; + }; + + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; tlmm: pinctrl@3400000 { @@ -3244,7 +3249,7 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>,