From: Ludovic Desroches Date: Thu, 16 Apr 2015 14:58:12 +0000 (+0200) Subject: tty/serial: at91: maxburst was missing for dma transfers X-Git-Tag: v4.0.3~24 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8aff8de536ecedc80b0171aa120cdd839d024add;p=thirdparty%2Fkernel%2Fstable.git tty/serial: at91: maxburst was missing for dma transfers commit a8d4e01637902311c5643b69a5c80e2805f04054 upstream. Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4e959c43f6804..6afce7eb3d74b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) config.direction = DMA_MEM_TO_DEV; config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr = port->mapbase + ATMEL_US_THR; + config.dst_maxburst = 1; ret = dmaengine_slave_config(atmel_port->chan_tx, &config); @@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) config.direction = DMA_DEV_TO_MEM; config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr = port->mapbase + ATMEL_US_RHR; + config.src_maxburst = 1; ret = dmaengine_slave_config(atmel_port->chan_rx, &config);