From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 26 Oct 2025 12:17:29 +0000 (+0200)
Subject: arm64: dts: imx8mp-debix-model-a: Fix ethernet PHY address
X-Git-Tag: v6.19-rc1~100^2~20^2~81
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8f76686bbdc87035eefc56a700f6788ce84f0e26;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: imx8mp-debix-model-a: Fix ethernet PHY address

The RTL8211E ethernet PHY on the Debix Model A board it located at
address 1. Replace the broadcast address with the correct unicast
address.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index af02af9e5334d..9422beee30b29 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -96,9 +96,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@0 { /* RTL8211E */
+		ethphy0: ethernet-phy@1 { /* RTL8211E */
 			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
+			reg = <1>;
 			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <20>;
 			reset-deassert-us = <200000>;