Apache Module mod_http2

@@ -40,6 +40,12 @@

This module relies on libnghttp2 to provide the core http/2 engine.

Warning

This module is experimental. Its behaviors, directives, and + defaults are subject to more frequent and change from release to + release relative to other standard modules. Users are encouraged to + consult the "CHANGES" file for potential updates.

Directives

@@ -263,7 +269,7 @@

Comments

Notice:
This is not a Q&A section. Comments placed here should be pointed towards suggestions on improving the documentation or server, and may be removed again by our moderators if they are either implemented or considered invalid/off-topic. Questions on how to manage the Apache HTTP Server should be directed at either our IRC channel, #httpd, on Freenode, or sent to our mailing lists.

- + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.de b/docs/manual/mod/quickreference.html.de index 7ff585f4170..573f9359b59 100644 --- a/docs/manual/mod/quickreference.html.de +++ b/docs/manual/mod/quickreference.html.de @@ -472,630 +472,639 @@ angegebenen MIME-Content-Type will exit. Group unix-group #-1 sBGroup under which the server will answer requests -H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP response headers -HeaderName filenamesvdhBName of the file that will be inserted at the top +svdhEConfigure HTTP response headers +HeaderName filenamesvdhBName of the file that will be inserted at the top of the index listing -HeartbeatAddress addr:portsXMulticast address for heartbeat packets -HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending +HeartbeatAddress addr:portsXMulticast address for heartbeat packets +HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data -HostnameLookups On|Off|Double Off svdCAktiviert DNS-Lookups auf Client-IP-Adressen -IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote +HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data +HostnameLookups On|Off|Double Off svdCAktiviert DNS-Lookups auf Client-IP-Adressen +IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote user -IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests -<If expression> ... </If>svdhCContains directives that apply only if a condition is +IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests +<If expression> ... </If>svdhCContains directives that apply only if a condition is satisfied by a request at runtime -<IfDefine [!]Parametername> ... - </IfDefine>svdhCSchließt Direktiven ein, die nur ausgeführt werden, +<IfDefine [!]Parametername> ... + </IfDefine>svdhCSchließt Direktiven ein, die nur ausgeführt werden, wenn eine Testbedingung beim Start wahr ist -<IfModule [!]Modulname|Modulbezeichner> - ... </IfModule>svdhCSchließt Direktiven ein, die abhängig vom +<IfModule [!]Modulname|Modulbezeichner> + ... </IfModule>svdhCSchließt Direktiven ein, die abhängig vom Vorhandensein oder Fehlen eines speziellen Moduls ausgeführt werden -<IfVersion [[!]operator] version> ... -</IfVersion>svdhEcontains version dependent configuration -ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files -ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates +<IfVersion [[!]operator] version> ... +</IfVersion>svdhEcontains version dependent configuration +ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files +ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates that are not explicitly mapped -ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling +ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling an imagemap -Include Dateiname|VerzeichnissvdCFügt andere Konfigurationsdateien innerhalb der +Include Dateiname|VerzeichnissvdCFügt andere Konfigurationsdateien innerhalb der Server-Konfigurationsdatei ein -IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within +IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. -IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing +IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. +IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing a directory -IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing +IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing a directory -IndexOptions [+|-]option [[+|-]option] -...svdhBVarious configuration settings for directory +IndexOptions [+|-]option [[+|-]option] +...svdhBVarious configuration settings for directory indexing -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index -IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index -InputSed sed-commanddhXSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index +IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index +InputSed sed-commanddhXSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the error log -ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the query field -ISAPICacheFile file-path [file-path] -...svBISAPI .dll files to be loaded at startup -ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks -ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI +ISAPICacheFile file-path [file-path] +...svBISAPI .dll files to be loaded at startup +ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks +ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI extensions -ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI +ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI extensions -KeepAlive On|Off On svCAktiviert persistente HTTP-Verbindungen -KeepAliveTimeout Sekunden 5 svCZeitspanne, die der Server während persistenter Verbindungen +KeepAlive On|Off On svCAktiviert persistente HTTP-Verbindungen +KeepAliveTimeout Sekunden 5 svCZeitspanne, die der Server während persistenter Verbindungen auf nachfolgende Anfragen wartet -KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to +KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to the specified maximum size, for potential use by filters such as mod_include. -LanguagePriority MIME-lang [MIME-lang] -...svdhBThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...svdhBThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit Methode [Methode] ... > ... - </Limit>svdhCBeschränkt die eingeschlossenen Zugriffskontrollen auf +LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit Methode [Methode] ... > ... + </Limit>svdhCBeschränkt die eingeschlossenen Zugriffskontrollen auf bestimmte HTTP-Methoden -<LimitExcept Methode [Methode] ... > ... - </LimitExcept>svdhCBeschränkt Zugriffskontrollen auf alle HTTP-Methoden +<LimitExcept Methode [Methode] ... > ... + </LimitExcept>svdhCBeschränkt Zugriffskontrollen auf alle HTTP-Methoden außer den genannten -LimitInternalRecursion Zahl [Zahl] 10 svCBestimmt die maximale Anzahl interner Umleitungen und +LimitInternalRecursion Zahl [Zahl] 10 svCBestimmt die maximale Anzahl interner Umleitungen und verschachtelter Unteranfragen -LimitRequestBody Bytes 0 svdhCBegrenzt die Gesamtgröße des vom Client gesendeten +LimitRequestBody Bytes 0 svdhCBegrenzt die Gesamtgröße des vom Client gesendeten HTTP-Request-Body -LimitRequestFields Anzahl 100 sCBegrenzt die Anzahl der HTTP-Request-Header, die vom Client +LimitRequestFields Anzahl 100 sCBegrenzt die Anzahl der HTTP-Request-Header, die vom Client entgegengenommen werden -LimitRequestFieldsize BytessCBegrenzt die Länge des vom Client gesendeten +LimitRequestFieldsize BytessCBegrenzt die Länge des vom Client gesendeten HTTP-Request-Headers -LimitRequestLine Bytes 8190 sCBegrenzt die Länge der vom Client entgegengenommenen +LimitRequestLine Bytes 8190 sCBegrenzt die Länge der vom Client entgegengenommenen HTTP-Anfragezeile -LimitXMLRequestBody Bytes 1000000 svdhCBegrenzt die Größe eines XML-basierten +LimitXMLRequestBody Bytes 1000000 svdhCBegrenzt die Größe eines XML-basierten Request-Bodys -Listen [IP-Addresse:]PortsMIP-Adressen und Ports, an denen der Server lauscht -ListenBacklog backlogsMMaximale Länge der Warteschlange schwebender +Listen [IP-Addresse:]PortsMIP-Adressen und Ports, an denen der Server lauscht +ListenBacklog backlogsMMaximale Länge der Warteschlange schwebender Verbindungen -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile filename [filename] ...svELink in the named object file or library -LoadModule module filenamesvELinks in the object file or library, and adds to the list +LoadFile filename [filename] ...svELink in the named object file or library +LoadModule module filenamesvELinks in the object file or library, and adds to the list of active modules -<Location - URL-Pfad|URL> ... </Location>svCWendet die enthaltenen Direktiven nur auf die entsprechenden +<Location + URL-Pfad|URL> ... </Location>svCWendet die enthaltenen Direktiven nur auf die entsprechenden URLs an -<LocationMatch - regex> ... </LocationMatch>svCWendet die enthaltenen Direktiven nur auf URLs an, die auf +<LocationMatch + regex> ... </LocationMatch>svCWendet die enthaltenen Direktiven nur auf URLs an, die auf reguläre Ausdrücke passen -LogFormat format|nickname -[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel Level warn svCSteuert die Ausführlichkeit des Fehlerprotokolls -LogMessage message +LogFormat format|nickname +[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel Level warn svCSteuert die Ausführlichkeit des Fehlerprotokolls +LogMessage message [hook=hook] [expr=expression] -dXLog user-defined message to error log +dXLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>svdBDefine a configuration file macro -MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server +... </Macro>svdBDefine a configuration file macro +MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server will handle during its life -MaxKeepAliveRequests Anzahl 100 svCAnzahl der Anfragen, die bei einer persistenten Verbindung +MaxKeepAliveRequests Anzahl 100 svCAnzahl der Anfragen, die bei einer persistenten Verbindung zulässig sind -MaxMemFree KBytes 0 sMMaximale Menge des Arbeitsspeichers, den die +MaxMemFree KBytes 0 sMMaximale Menge des Arbeitsspeichers, den die Haupt-Zuteilungsroutine verwalten darf, ohne free() aufzurufen -MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete +MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete resource -MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete +MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete resource -MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete +MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete resource -MaxRequestWorkers numbersMMaximum number of connections that will be processed +MaxRequestWorkers numbersMMaximum number of connections that will be processed simultaneously -MaxSpareServers Anzahl 10 sMMaximale Anzahl der unbeschäftigten Kindprozesse des +MaxSpareServers Anzahl 10 sMMaximale Anzahl der unbeschäftigten Kindprozesse des Servers -MaxSpareThreads AnzahlsMMaximale Anzahl unbeschäftigter Threads -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections -MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers -MetaDir directory .web svdhEName of the directory to find CERN-style meta information +MaxSpareThreads AnzahlsMMaximale Anzahl unbeschäftigter Threads +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections +MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers +MetaDir directory .web svdhEName of the directory to find CERN-style meta information files -MetaFiles on|off off svdhEActivates CERN meta-file processing -MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style +MetaFiles on|off off svdhEActivates CERN meta-file processing +MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style meta information -MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents +MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers Anzahl 5 sMMinimale Anzahl der unbeschäftigten Kindprozesse des +MinSpareServers Anzahl 5 sMMinimale Anzahl der unbeschäftigten Kindprozesse des Servers -MinSpareThreads AnzahlsMMinimale Anzahl unbeschäftigter Threads, die zur +MinSpareThreads AnzahlsMMinimale Anzahl unbeschäftigter Threads, die zur Bedienung von Anfragespitzen zur Verfügung stehen -MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time -ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate -ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time +ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate +ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for a matching file with MultiViews -Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all +Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all or specified mutexes -NameVirtualHost Adresse[:Port]sCBestimmt eine IP-Adresse für den Betrieb namensbasierter +NameVirtualHost Adresse[:Port]sCBestimmt eine IP-Adresse für den Betrieb namensbasierter virtueller Hosts -NoProxy host [host] ...svEHosts, domains, or networks that will be connected to +NoProxy host [host] ...svEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]Option [[+|-]Option] ... All svdhCDefiniert, welche Eigenschaften oder Funktionen in einem +NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]Option [[+|-]Option] ... All svdhCDefiniert, welche Eigenschaften oder Funktionen in einem bestimmten Verzeichnis verfügbar sind - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhXSed command for filtering response content -PassEnv env-variable [env-variable] -...svdhBPasses environment variables from the shell -PidFile Dateiname logs/httpd.pid sMDatei, in welcher der Server die Prozess-ID des Daemons +OutputSed sed-commanddhXSed command for filtering response content +PassEnv env-variable [env-variable] +...svdhBPasses environment variables from the shell +PidFile Dateiname logs/httpd.pid sMDatei, in welcher der Server die Prozess-ID des Daemons ablegt -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protocolsvCProtocol for a listening socket -ProtocolEcho On|Off Off svXTurn the echo server on or off -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a +Protocol protocolsvCProtocol for a listening socket +ProtocolEcho On|Off Off svXTurn the echo server on or off +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...svEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...svEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainsvEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>svEPathname to DBM file. -ProxyExpressDBMFile <type>svEDBM type of file. -ProxyExpressEnable [on|off]svEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainsvEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>svEPathname to DBM file. +ProxyExpressDBMFile <type>svEDBM type of file. +ProxyExpressEnable [on|off]svEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serversvERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serversvERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off svEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off svEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addresssvESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondssvENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addresssvESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondssvENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response header for proxied requests -ReadmeName filenamesvdhBName of the file that will be inserted at the end +ReadmeName filenamesvdhBName of the file that will be inserted at the end of the index listing -ReceiveBufferSize bytes 0 sMTCP receive buffer size -Redirect [status] URL-path -URLsvdhBSends an external redirect asking the client to fetch +ReceiveBufferSize bytes 0 sMTCP receive buffer size +Redirect [status] URL-path +URLsvdhBSends an external redirect asking the client to fetch a different URL -RedirectMatch [status] regex -URLsvdhBSends an external redirect based on a regular expression match +RedirectMatch [status] regex +URLsvdhBSends an external redirect based on a regular expression match of the current URL -RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch +RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch a different URL -RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch +RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch a different URL -ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers -RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...vdhBRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers +RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...vdhBRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...vdhBRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...vdhBRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...vdhBRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...vdhBRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...vdhBRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...vdhBRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...vdhBRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...vdhBRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...vdhBRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...vdhBRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...vdhBRemoves any content type associations for a set of file +RemoveType extension [extension] +...vdhBRemoves any content type associations for a set of file extensions -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP request headers -RequestReadTimeout +svdhEConfigure HTTP request headers +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -svESet timeout values for receiving request headers and body from client. +svESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhBTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhBTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternsvdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternsvdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -svEDefines a mapping function for key-lookup -RewriteOptions OptionssvdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]svdhEDefines rules for the rewriting engine -RLimitCPU Sekunden|max [Sekunden|max]svdhCBegrenzt den CPU-Verbrauch von Prozessen, die von +RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +svEDefines a mapping function for key-lookup +RewriteOptions OptionssvdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]svdhEDefines rules for the rewriting engine +RLimitCPU Sekunden|max [Sekunden|max]svdhCBegrenzt den CPU-Verbrauch von Prozessen, die von Apache-Kindprozessen gestartet wurden -RLimitMEM Bytes|max [Bytes|max]svdhCBegrenzt den Speicherverbrauch von Prozessen, die von +RLimitMEM Bytes|max [Bytes|max]svdhCBegrenzt den Speicherverbrauch von Prozessen, die von Apache-Kindprozessen gestartet wurden -RLimitNPROC Zahl|max [Zahl|max]svdhCBegrenzt die Anzahl der Prozesse, die von Prozessen gestartet +RLimitNPROC Zahl|max [Zahl|max]svdhCBegrenzt die Anzahl der Prozesse, die von Prozessen gestartet werden können, der ihrerseits von Apache-Kinprozessen gestartet wurden -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile Dateipfad logs/apache_status sMAblageort der Datei, die zur Speicherung von Daten zur +ScoreBoardFile Dateipfad logs/apache_status sMAblageort der Datei, die zur Speicherung von Daten zur Koordinierung der Kindprozesse verwendet wird -Script Methode CGI-SkriptsvdBAktiviert ein CGI-Skript für eine bestimmte +Script Methode CGI-SkriptsvdBAktiviert ein CGI-Skript für eine bestimmte Anfragemethode. -ScriptAlias URL-path -file-path|directory-pathsvBMaps a URL to a filesystem location and designates the +ScriptAlias URL-path +file-path|directory-pathsvBMaps a URL to a filesystem location and designates the target as a CGI script -ScriptAliasMatch regex -file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression +ScriptAliasMatch regex +file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression and designates the target as a CGI script -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCMethode zur Ermittlung des Interpreters von +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCMethode zur Ermittlung des Interpreters von CGI-Skripten -ScriptLog file-pathsvBLocation of the CGI script error logfile -ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded +ScriptLog file-pathsvBLocation of the CGI script error logfile +ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded in the scriptlog -ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile -ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with +ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile +ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with the cgi daemon -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters of a request or the last 63, assuming the request itself is greater than 63 chars. -SendBufferSize Bytes 0 sMGröße des TCP-Puffers -ServerAdmin E-Mail-Adresse|URLsvCE-Mail-Adresse, die der Server in Fehlermeldungen einfügt, +SendBufferSize Bytes 0 sMGröße des TCP-Puffers +ServerAdmin E-Mail-Adresse|URLsvCE-Mail-Adresse, die der Server in Fehlermeldungen einfügt, welche an den Client gesendet werden -ServerAlias Hostname [Hostname] ...vCAlternativer Name für einen Host, der verwendet wird, wenn +ServerAlias Hostname [Hostname] ...vCAlternativer Name für einen Host, der verwendet wird, wenn Anfragen einem namensbasierten virtuellen Host zugeordnet werden -ServerLimit AnzahlsMObergrenze für die konfigurierbare Anzahl von +ServerLimit AnzahlsMObergrenze für die konfigurierbare Anzahl von Prozessen -ServerName -voll-qualifizierter-Domainname[:port]svCRechnername und Port, die der Server dazu verwendet, sich +ServerName +voll-qualifizierter-Domainname[:port]svCRechnername und Port, die der Server dazu verwendet, sich selbst zu identifizieren -ServerPath URL-PfadvCVeralteter URL-Pfad für einen namensbasierten +ServerPath URL-PfadvCVeralteter URL-Pfad für einen namensbasierten virtuellen Host, auf den von einem inkompatiblen Browser zugegriffen wird -ServerRoot Verzeichnis /usr/local/apache sCBasisverzeichnis der Serverinstallation -ServerSignature On|Off|EMail Off svdhCKonfiguriert die Fußzeile von servergenerierten +ServerRoot Verzeichnis /usr/local/apache sCBasisverzeichnis der Serverinstallation +ServerSignature On|Off|EMail Off svdhCKonfiguriert die Fußzeile von servergenerierten Dokumenten -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCKonfiguriert den HTTP-Response-Header +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCKonfiguriert den HTTP-Response-Header Server -Session On|Off Off svdhEEnables a session for the current directory or location -SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session -SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session -SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off svdhEEnable a per user session -SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the +Session On|Off Off svdhEEnables a session for the current directory or location +SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session +SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session +SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off svdhEEnable a per user session +SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored -SessionHeader headersvdhEImport session updates from a given HTTP response header -SessionInclude pathsvdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session -SetEnv env-variable [value]svdhBSets environment variables -SetEnvIf attribute +SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored +SessionHeader headersvdhEImport session updates from a given HTTP response header +SessionInclude pathsvdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session +SetEnv env-variable [value]svdhBSets environment variables +SetEnvIf attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request -SetEnvIfExpr expr +SetEnvIfExpr expr [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression -SetEnvIfNoCase attribute regex + [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression +SetEnvIfNoCase attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request without respect to case -SetHandler Handlername|NonesvdhCErzwingt die Verarbeitung aller passenden Dateien durch +SetHandler Handlername|NonesvdhCErzwingt die Verarbeitung aller passenden Dateien durch einen Handler -SetInputFilter Filter[;Filter...]svdhCBestimmt die Filter, die Client-Anfragen und POST-Eingaben +SetInputFilter Filter[;Filter...]svdhCBestimmt die Filter, die Client-Anfragen und POST-Eingaben verarbeiten -SetOutputFilter Filter[;Filter...]svdhCBestimmt die Filter, die Antworten des Servers verarbeiten -SSIEndTag tag "-->" svBString that ends an include element -SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI +SetOutputFilter Filter[;Filter...]svdhCBestimmt die Filter, die Antworten des Servers verarbeiten +SSIEndTag tag "-->" svBString that ends an include element +SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI error -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag "<!--#" svBString that starts an include element -SSITimeFormat formatstring "%A, %d-%b-%Y %H:%M +svdhBConfigures the format in which date strings are +SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. +SSIStartTag tag "<!--#" svBString that starts an include element +SSITimeFormat formatstring "%A, %d-%b-%Y %H:%M +svdhBConfigures the format in which date strings are displayed -SSIUndefinedEcho string "(none)" svdhBString displayed when an unset variable is echoed -SSLCACertificateFile file-pathsvEFile of concatenated PEM-encoded CA Certificates +SSIUndefinedEcho string "(none)" svdhBString displayed when an unset variable is echoed +SSLCACertificateFile file-pathsvEFile of concatenated PEM-encoded CA Certificates for Client Auth -SSLCACertificatePath directory-pathsvEDirectory of PEM-encoded CA Certificates for +SSLCACertificatePath directory-pathsvEDirectory of PEM-encoded CA Certificates for Client Auth -SSLCADNRequestFile file-pathsvEFile of concatenated PEM-encoded CA Certificates +SSLCADNRequestFile file-pathsvEFile of concatenated PEM-encoded CA Certificates for defining acceptable CA names -SSLCADNRequestPath directory-pathsvEDirectory of PEM-encoded CA Certificates for +SSLCADNRequestPath directory-pathsvEDirectory of PEM-encoded CA Certificates for defining acceptable CA names -SSLCARevocationCheck chain|leaf|none none svEEnable CRL-based revocation checking -SSLCARevocationFile file-pathsvEFile of concatenated PEM-encoded CA CRLs for +SSLCARevocationCheck chain|leaf|none none svEEnable CRL-based revocation checking +SSLCARevocationFile file-pathsvEFile of concatenated PEM-encoded CA CRLs for Client Auth -SSLCARevocationPath directory-pathsvEDirectory of PEM-encoded CA CRLs for +SSLCARevocationPath directory-pathsvEDirectory of PEM-encoded CA CRLs for Client Auth -SSLCertificateChainFile file-pathsvEFile of PEM-encoded Server CA Certificates -SSLCertificateFile file-pathsvEServer PEM-encoded X.509 certificate data file -SSLCertificateKeyFile file-pathsvEServer PEM-encoded private key file -SSLCipherSuite cipher-spec DEFAULT (depends on +svdhECipher Suite available for negotiation in SSL +SSLCertificateChainFile file-pathsvEFile of PEM-encoded Server CA Certificates +SSLCertificateFile file-pathsvEServer PEM-encoded X.509 certificate data file +SSLCertificateKeyFile file-pathsvEServer PEM-encoded private key file +SSLCipherSuite cipher-spec DEFAULT (depends on +svdhECipher Suite available for negotiation in SSL handshake -SSLCompression on|off off svEEnable compression on the SSL level -SSLCryptoDevice engine builtin sEEnable use of a cryptographic hardware accelerator -SSLEngine on|off|optional off svESSL Engine Operation Switch -SSLFIPS on|off off sESSL FIPS mode Switch -SSLHonorCipherOrder on|off off svEOption to prefer the server's cipher preference order -SSLInsecureRenegotiation on|off off svEOption to enable support for insecure renegotiation -SSLOCSDefaultResponder urisvESet the default responder URI for OCSP validation -SSLOCSPEnable on|off off svEEnable OCSP validation of the client certificate chain -SSLOCSPOverrideResponder on|off off svEForce use of the default responder URI for OCSP validation -SSLOCSPResponderTimeout seconds 10 svETimeout for OCSP queries -SSLOCSPResponseMaxAge seconds -1 svEMaximum allowable age for OCSP responses -SSLOCSPResponseTimeSkew seconds 300 svEMaximum allowable time skew for OCSP response validation -SSLOCSPUseRequestNonce on|off on svEUse a nonce within OCSP queries -SSLOpenSSLConfCmd command-name command-valuesvEConfigure OpenSSL parameters through its SSL_CONF API -SSLOptions [+|-]option ...svdhEConfigure various SSL engine run-time options -SSLPassPhraseDialog type builtin sEType of pass phrase dialog for encrypted private +SSLCompression on|off off svEEnable compression on the SSL level +SSLCryptoDevice engine builtin sEEnable use of a cryptographic hardware accelerator +SSLEngine on|off|optional off svESSL Engine Operation Switch +SSLFIPS on|off off sESSL FIPS mode Switch +SSLHonorCipherOrder on|off off svEOption to prefer the server's cipher preference order +SSLInsecureRenegotiation on|off off svEOption to enable support for insecure renegotiation +SSLOCSDefaultResponder urisvESet the default responder URI for OCSP validation +SSLOCSPEnable on|off off svEEnable OCSP validation of the client certificate chain +SSLOCSPOverrideResponder on|off off svEForce use of the default responder URI for OCSP validation +SSLOCSPResponderTimeout seconds 10 svETimeout for OCSP queries +SSLOCSPResponseMaxAge seconds -1 svEMaximum allowable age for OCSP responses +SSLOCSPResponseTimeSkew seconds 300 svEMaximum allowable time skew for OCSP response validation +SSLOCSPUseRequestNonce on|off on svEUse a nonce within OCSP queries +SSLOpenSSLConfCmd command-name command-valuesvEConfigure OpenSSL parameters through its SSL_CONF API +SSLOptions [+|-]option ...svdhEConfigure various SSL engine run-time options +SSLPassPhraseDialog type builtin sEType of pass phrase dialog for encrypted private keys -SSLProtocol [+|-]protocol ... all svEConfigure usable SSL/TLS protocol versions -SSLProxyCACertificateFile file-pathsvEFile of concatenated PEM-encoded CA Certificates +SSLProtocol [+|-]protocol ... all svEConfigure usable SSL/TLS protocol versions +SSLProxyCACertificateFile file-pathsvEFile of concatenated PEM-encoded CA Certificates for Remote Server Auth -SSLProxyCACertificatePath directory-pathsvEDirectory of PEM-encoded CA Certificates for +SSLProxyCACertificatePath directory-pathsvEDirectory of PEM-encoded CA Certificates for Remote Server Auth -SSLProxyCARevocationCheck chain|leaf|none none svEEnable CRL-based revocation checking for Remote Server Auth -SSLProxyCARevocationFile file-pathsvEFile of concatenated PEM-encoded CA CRLs for +SSLProxyCARevocationCheck chain|leaf|none none svEEnable CRL-based revocation checking for Remote Server Auth +SSLProxyCARevocationFile file-pathsvEFile of concatenated PEM-encoded CA CRLs for Remote Server Auth -SSLProxyCARevocationPath directory-pathsvEDirectory of PEM-encoded CA CRLs for +SSLProxyCARevocationPath directory-pathsvEDirectory of PEM-encoded CA CRLs for Remote Server Auth -SSLProxyCheckPeerCN on|off on svEWhether to check the remote server certificate's CN field +SSLProxyCheckPeerCN on|off on svEWhether to check the remote server certificate's CN field -SSLProxyCheckPeerExpire on|off on svEWhether to check if remote server certificate is expired +SSLProxyCheckPeerExpire on|off on svEWhether to check if remote server certificate is expired -SSLProxyCheckPeerName on|off on svEConfigure host name checking for remote server certificates +SSLProxyCheckPeerName on|off on svEConfigure host name checking for remote server certificates -SSLProxyCipherSuite cipher-spec ALL:!ADH:RC4+RSA:+H +svdhECipher Suite available for negotiation in SSL +SSLProxyCipherSuite cipher-spec ALL:!ADH:RC4+RSA:+H +svdhECipher Suite available for negotiation in SSL proxy handshake -SSLProxyEngine on|off off svESSL Proxy Engine Operation Switch -SSLProxyMachineCertificateChainFile filenamesEFile of concatenated PEM-encoded CA certificates to be used by the proxy for choosing a certificate -SSLProxyMachineCertificateFile filenamesEFile of concatenated PEM-encoded client certificates and keys to be used by the proxy -SSLProxyMachineCertificatePath directorysEDirectory of PEM-encoded client certificates and keys to be used by the proxy -SSLProxyProtocol [+|-]protocol ... all svEConfigure usable SSL protocol flavors for proxy usage -SSLProxyVerify level none svEType of remote server Certificate verification -SSLProxyVerifyDepth number 1 svEMaximum depth of CA Certificates in Remote Server +SSLProxyEngine on|off off svESSL Proxy Engine Operation Switch +SSLProxyMachineCertificateChainFile filenamesEFile of concatenated PEM-encoded CA certificates to be used by the proxy for choosing a certificate +SSLProxyMachineCertificateFile filenamesEFile of concatenated PEM-encoded client certificates and keys to be used by the proxy +SSLProxyMachineCertificatePath directorysEDirectory of PEM-encoded client certificates and keys to be used by the proxy +SSLProxyProtocol [+|-]protocol ... all svEConfigure usable SSL protocol flavors for proxy usage +SSLProxyVerify level none svEType of remote server Certificate verification +SSLProxyVerifyDepth number 1 svEMaximum depth of CA Certificates in Remote Server Certificate verification -SSLRandomSeed context source -[bytes]sEPseudo Random Number Generator (PRNG) seeding +SSLRandomSeed context source +[bytes]sEPseudo Random Number Generator (PRNG) seeding source -SSLRenegBufferSize bytes 131072 dhESet the size for the SSL renegotiation buffer -SSLRequire expressiondhEAllow access only when an arbitrarily complex +SSLRenegBufferSize bytes 131072 dhESet the size for the SSL renegotiation buffer +SSLRequire expressiondhEAllow access only when an arbitrarily complex boolean expression is true -SSLRequireSSLdhEDeny access when SSL is not used for the +SSLRequireSSLdhEDeny access when SSL is not used for the HTTP request -SSLSessionCache type none sEType of the global/inter-process SSL Session +SSLSessionCache type none sEType of the global/inter-process SSL Session Cache -SSLSessionCacheTimeout seconds 300 svENumber of seconds before an SSL session expires +SSLSessionCacheTimeout seconds 300 svENumber of seconds before an SSL session expires in the Session Cache -SSLSessionTicketKeyFile file-pathsvEPersistent encryption/decryption key for TLS session tickets -SSLSessionTickets on|off on svEEnable or disable use of TLS session tickets -SSLSRPUnknownUserSeed secret-stringsvESRP unknown user seed -SSLSRPVerifierFile file-pathsvEPath to SRP verifier file -SSLStaplingCache typesEConfigures the OCSP stapling cache -SSLStaplingErrorCacheTimeout seconds 600 svENumber of seconds before expiring invalid responses in the OCSP stapling cache -SSLStaplingFakeTryLater on|off on svESynthesize "tryLater" responses for failed OCSP stapling queries -SSLStaplingForceURL urisvEOverride the OCSP responder URI specified in the certificate's AIA extension -SSLStaplingResponderTimeout seconds 10 svETimeout for OCSP stapling queries -SSLStaplingResponseMaxAge seconds -1 svEMaximum allowable age for OCSP stapling responses -SSLStaplingResponseTimeSkew seconds 300 svEMaximum allowable time skew for OCSP stapling response validation -SSLStaplingReturnResponderErrors on|off on svEPass stapling related OCSP errors on to client -SSLStaplingStandardCacheTimeout seconds 3600 svENumber of seconds before expiring responses in the OCSP stapling cache -SSLStrictSNIVHostCheck on|off off svEWhether to allow non-SNI clients to access a name-based virtual +SSLSessionTicketKeyFile file-pathsvEPersistent encryption/decryption key for TLS session tickets +SSLSessionTickets on|off on svEEnable or disable use of TLS session tickets +SSLSRPUnknownUserSeed secret-stringsvESRP unknown user seed +SSLSRPVerifierFile file-pathsvEPath to SRP verifier file +SSLStaplingCache typesEConfigures the OCSP stapling cache +SSLStaplingErrorCacheTimeout seconds 600 svENumber of seconds before expiring invalid responses in the OCSP stapling cache +SSLStaplingFakeTryLater on|off on svESynthesize "tryLater" responses for failed OCSP stapling queries +SSLStaplingForceURL urisvEOverride the OCSP responder URI specified in the certificate's AIA extension +SSLStaplingResponderTimeout seconds 10 svETimeout for OCSP stapling queries +SSLStaplingResponseMaxAge seconds -1 svEMaximum allowable age for OCSP stapling responses +SSLStaplingResponseTimeSkew seconds 300 svEMaximum allowable time skew for OCSP stapling response validation +SSLStaplingReturnResponderErrors on|off on svEPass stapling related OCSP errors on to client +SSLStaplingStandardCacheTimeout seconds 3600 svENumber of seconds before expiring responses in the OCSP stapling cache +SSLStrictSNIVHostCheck on|off off svEWhether to allow non-SNI clients to access a name-based virtual host. -SSLUserName varnamesdhEVariable name to determine user name -SSLUseStapling on|off off svEEnable stapling of OCSP responses in the TLS handshake -SSLVerifyClient level none svdhEType of Client Certificate verification -SSLVerifyDepth number 1 svdhEMaximum depth of CA Certificates in Client +SSLUserName varnamesdhEVariable name to determine user name +SSLUseStapling on|off off svEEnable stapling of OCSP responses in the TLS handshake +SSLVerifyClient level none svdhEType of Client Certificate verification +SSLVerifyDepth number 1 svdhEMaximum depth of CA Certificates in Client Certificate verification -StartServers AnzahlsMAnzahl der Kindprozesse des Servers, die beim Start erstellt +StartServers AnzahlsMAnzahl der Kindprozesse des Servers, die beim Start erstellt werden -StartThreads AnzahlsMAnzahl der Threads, die beim Start erstellt werden -Substitute s/pattern/substitution/[infq]dhEPattern to filter the response content -SubstituteMaxLineLength bytes(b|B|k|K|m|M|g|G) 1m dhESet the maximum line size -Suexec On|OffsBEnable or disable the suEXEC feature -SuexecUserGroup User GroupsvEUser and group for CGI programs to run as -ThreadLimit AnzahlsMBestimmt die Obergrenze der konfigurierbaren Anzahl von Threads +StartThreads AnzahlsMAnzahl der Threads, die beim Start erstellt werden +Substitute s/pattern/substitution/[infq]dhEPattern to filter the response content +SubstituteMaxLineLength bytes(b|B|k|K|m|M|g|G) 1m dhESet the maximum line size +Suexec On|OffsBEnable or disable the suEXEC feature +SuexecUserGroup User GroupsvEUser and group for CGI programs to run as +ThreadLimit AnzahlsMBestimmt die Obergrenze der konfigurierbaren Anzahl von Threads pro Kindprozess -ThreadsPerChild AnzahlsMAnzahl der Threads, die mit jedem Kindprozess gestartet +ThreadsPerChild AnzahlsMAnzahl der Threads, die mit jedem Kindprozess gestartet werden -ThreadStackSize sizesMDie Größe des Stacks in Bytes, der von Threads +ThreadStackSize sizesMDie Größe des Stacks in Bytes, der von Threads verwendet wird, die Client-Verbindungen bearbeiten. -TimeOut Sekunden 60 sCZeitspanne, die der Server auf verschiedene Ereignisse wartet, +TimeOut Sekunden 60 sCZeitspanne, die der Server auf verschiedene Ereignisse wartet, bevor er die Anfrage abbricht -TraceEnable [on|off|extended] on sCLegt das Verhalten von TRACE-Anfragen fest -TransferLog file|pipesvBSpecify location of a log file -TypesConfig file-path conf/mime.types sBThe location of the mime.types file -UnDefine parameter-namesCUndefine the existence of a variable -UndefMacro namesvdBUndefine a macro -UnsetEnv env-variable [env-variable] -...svdhBRemoves variables from the environment -Use name [value1 ... valueN] -svdBUse a macro -UseCanonicalName On|Off|DNS Off svdCBestimmt, wie der Server seinen eigenen Namen und Port +TraceEnable [on|off|extended] on sCLegt das Verhalten von TRACE-Anfragen fest +TransferLog file|pipesvBSpecify location of a log file +TypesConfig file-path conf/mime.types sBThe location of the mime.types file +UnDefine parameter-namesCUndefine the existence of a variable +UndefMacro namesvdBUndefine a macro +UnsetEnv env-variable [env-variable] +...svdhBRemoves variables from the environment +Use name [value1 ... valueN] +svdBUse a macro +UseCanonicalName On|Off|DNS Off svdCBestimmt, wie der Server seinen eigenen Namen und Port ermittelt -UseCanonicalPhysicalPort On|Off Off svdCBestimmt, wie der Server seinen eigenen Namen und Port +UseCanonicalPhysicalPort On|Off Off svdCBestimmt, wie der Server seinen eigenen Namen und Port ermittelt -User unix-userid #-1 sBThe userid under which the server will answer +User unix-userid #-1 sBThe userid under which the server will answer requests -UserDir directory-filename [directory-filename] ... -svBLocation of the user-specific directories -VHostCGIMode On|Off|Secure On vXDetermines whether the virtualhost can run +UserDir directory-filename [directory-filename] ... +svBLocation of the user-specific directories +VHostCGIMode On|Off|Secure On vXDetermines whether the virtualhost can run subprocesses, and the privileges available to subprocesses. -VHostPrivs [+-]?privilege-name [[+-]?privilege-name] ...vXAssign arbitrary privileges to subprocesses created +VHostPrivs [+-]?privilege-name [[+-]?privilege-name] ...vXAssign arbitrary privileges to subprocesses created by a virtual host. -VHostGroup unix-groupidvXSets the Group ID under which a virtual host runs. -VHostPrivs [+-]?privilege-name [[+-]?privilege-name] ...vXAssign arbitrary privileges to a virtual host. -VHostSecure On|Off On vXDetermines whether the server runs with enhanced security +VHostGroup unix-groupidvXSets the Group ID under which a virtual host runs. +VHostPrivs [+-]?privilege-name [[+-]?privilege-name] ...vXAssign arbitrary privileges to a virtual host. +VHostSecure On|Off On vXDetermines whether the server runs with enhanced security for the virtualhost. -VHostUser unix-useridvXSets the User ID under which a virtual host runs. -VirtualDocumentRoot interpolated-directory|none none svEDynamically configure the location of the document root +VHostUser unix-useridvXSets the User ID under which a virtual host runs. +VirtualDocumentRoot interpolated-directory|none none svEDynamically configure the location of the document root for a given virtual host -VirtualDocumentRootIP interpolated-directory|none none svEDynamically configure the location of the document root +VirtualDocumentRootIP interpolated-directory|none none svEDynamically configure the location of the document root for a given virtual host -<VirtualHost +<VirtualHost Adresse[:Port] [Adresse[:Port]] - ...> ... </VirtualHost>sCEnthält Direktiven, die nur auf bestimmte Hostnamen oder + ...> ... </VirtualHost>sCEnthält Direktiven, die nur auf bestimmte Hostnamen oder IP-Adressen angewendet werden -VirtualScriptAlias interpolated-directory|none none svEDynamically configure the location of the CGI directory for +VirtualScriptAlias interpolated-directory|none none svEDynamically configure the location of the CGI directory for a given virtual host -VirtualScriptAliasIP interpolated-directory|none none svEDynamically configure the location of the CGI directory for +VirtualScriptAliasIP interpolated-directory|none none svEDynamically configure the location of the CGI directory for a given virtual host -WatchdogInterval number-of-seconds 1 sBWatchdog interval in seconds -XBitHack on|off|full off svdhBParse SSI directives in files with the execute bit +WatchdogInterval number-of-seconds 1 sBWatchdog interval in seconds +XBitHack on|off|full off svdhBParse SSI directives in files with the execute bit set -xml2EncAlias charset alias [alias ...]sBRecognise Aliases for encoding values -xml2EncDefault namesvdhBSets a default encoding to assume when absolutely no information +xml2EncAlias charset alias [alias ...]sBRecognise Aliases for encoding values +xml2EncDefault namesvdhBSets a default encoding to assume when absolutely no information can be automatically detected -xml2StartParse element [element ...]svdhBAdvise the parser to skip leading junk. +xml2StartParse element [element ...]svdhBAdvise the parser to skip leading junk.

Verfügbare Sprachen: de | @@ -1130,4 +1139,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.en b/docs/manual/mod/quickreference.html.en index 66219aa8d6b..b56636fc65d 100644 --- a/docs/manual/mod/quickreference.html.en +++ b/docs/manual/mod/quickreference.html.en @@ -467,620 +467,629 @@ media type in the HTTP Content-Type header field will exit. Group unix-group #-1 sBGroup under which the server will answer requests -H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP response headers -HeaderName filenamesvdhBName of the file that will be inserted at the top +svdhEConfigure HTTP response headers +HeaderName filenamesvdhBName of the file that will be inserted at the top of the index listing -HeartbeatAddress addr:portsXMulticast address for heartbeat packets -HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending +HeartbeatAddress addr:portsXMulticast address for heartbeat packets +HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data -HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses -IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote +HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data +HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses +IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote user -IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests -<If expression> ... </If>svdhCContains directives that apply only if a condition is +IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests +<If expression> ... </If>svdhCContains directives that apply only if a condition is satisfied by a request at runtime -<IfDefine [!]parameter-name> ... - </IfDefine>svdhCEncloses directives that will be processed only +<IfDefine [!]parameter-name> ... + </IfDefine>svdhCEncloses directives that will be processed only if a test is true at startup -<IfModule [!]module-file|module-identifier> ... - </IfModule>svdhCEncloses directives that are processed conditional on the +<IfModule [!]module-file|module-identifier> ... + </IfModule>svdhCEncloses directives that are processed conditional on the presence or absence of a specific module -<IfVersion [[!]operator] version> ... -</IfVersion>svdhEcontains version dependent configuration -ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files -ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates +<IfVersion [[!]operator] version> ... +</IfVersion>svdhEcontains version dependent configuration +ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files +ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates that are not explicitly mapped -ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling +ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling an imagemap -Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within +Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within +IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. -IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing +IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. +IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing a directory -IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing +IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing a directory -IndexOptions [+|-]option [[+|-]option] -...svdhBVarious configuration settings for directory +IndexOptions [+|-]option [[+|-]option] +...svdhBVarious configuration settings for directory indexing -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index -IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index -InputSed sed-commanddhXSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index +IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index +InputSed sed-commanddhXSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the error log -ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the query field -ISAPICacheFile file-path [file-path] -...svBISAPI .dll files to be loaded at startup -ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks -ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI +ISAPICacheFile file-path [file-path] +...svBISAPI .dll files to be loaded at startup +ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks +ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI extensions -ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI +ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI extensions -KeepAlive On|Off On svCEnables HTTP persistent connections -KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent +KeepAlive On|Off On svCEnables HTTP persistent connections +KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent requests on a persistent connection -KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to +KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to the specified maximum size, for potential use by filters such as mod_include. -LanguagePriority MIME-lang [MIME-lang] -...svdhBThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...svdhBThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit method [method] ... > ... - </Limit>dhCRestrict enclosed access controls to only certain HTTP +LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit method [method] ... > ... + </Limit>dhCRestrict enclosed access controls to only certain HTTP methods -<LimitExcept method [method] ... > ... - </LimitExcept>dhCRestrict access controls to all HTTP methods +<LimitExcept method [method] ... > ... + </LimitExcept>dhCRestrict access controls to all HTTP methods except the named ones -LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested +LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested subrequests -LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent +LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent from the client -LimitRequestFields number 100 svCLimits the number of HTTP request header fields that +LimitRequestFields number 100 svCLimits the number of HTTP request header fields that will be accepted from the client -LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the +LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the client -LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted +LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted from the client -LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body -Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server +LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body +Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server listens to -ListenBacklog backlogsMMaximum length of the queue of pending connections -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenBacklog backlogsMMaximum length of the queue of pending connections +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile filename [filename] ...svELink in the named object file or library -LoadModule module filenamesvELinks in the object file or library, and adds to the list +LoadFile filename [filename] ...svELink in the named object file or library +LoadModule module filenamesvELinks in the object file or library, and adds to the list of active modules -<Location - "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching +<Location + "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching URLs -<LocationMatch - regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression +<LocationMatch + regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression matching URLs -LogFormat format|nickname -[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel [module:]level +LogFormat format|nickname +[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel [module:]level [module:level] ... - warn svdCControls the verbosity of the ErrorLog -LogMessage message + warn svdCControls the verbosity of the ErrorLog +LogMessage message [hook=hook] [expr=expression] -dXLog user-defined message to error log +dXLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>svdBDefine a configuration file macro -MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server +... </Macro>svdBDefine a configuration file macro +MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server will handle during its life -MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent +MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent connection -MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed +MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed to hold without calling free() -MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete +MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete resource -MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete +MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete resource -MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete +MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete resource -MaxRequestWorkers numbersMMaximum number of connections that will be processed +MaxRequestWorkers numbersMMaximum number of connections that will be processed simultaneously -MaxSpareServers number 10 sMMaximum number of idle child server processes -MaxSpareThreads numbersMMaximum number of idle threads -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections -MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers -MetaDir directory .web svdhEName of the directory to find CERN-style meta information +MaxSpareServers number 10 sMMaximum number of idle child server processes +MaxSpareThreads numbersMMaximum number of idle threads +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections +MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers +MetaDir directory .web svdhEName of the directory to find CERN-style meta information files -MetaFiles on|off off svdhEActivates CERN meta-file processing -MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style +MetaFiles on|off off svdhEActivates CERN meta-file processing +MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style meta information -MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents +MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers number 5 sMMinimum number of idle child server processes -MinSpareThreads numbersMMinimum number of idle threads available to handle request +MinSpareServers number 5 sMMinimum number of idle child server processes +MinSpareThreads numbersMMinimum number of idle threads available to handle request spikes -MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time -ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate -ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time +ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate +ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for a matching file with MultiViews -Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all +Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all or specified mutexes -NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual +NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual hosting -NoProxy host [host] ...svEHosts, domains, or networks that will be connected to +NoProxy host [host] ...svEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular +NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular directory - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhXSed command for filtering response content -PassEnv env-variable [env-variable] -...svdhBPasses environment variables from the shell -PidFile filename logs/httpd.pid sMFile where the server records the process ID +OutputSed sed-commanddhXSed command for filtering response content +PassEnv env-variable [env-variable] +...svdhBPasses environment variables from the shell +PidFile filename logs/httpd.pid sMFile where the server records the process ID of the daemon -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protocolsvCProtocol for a listening socket -ProtocolEcho On|Off Off svXTurn the echo server on or off -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a +Protocol protocolsvCProtocol for a listening socket +ProtocolEcho On|Off Off svXTurn the echo server on or off +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...svEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...svEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainsvEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>svEPathname to DBM file. -ProxyExpressDBMFile <type>svEDBM type of file. -ProxyExpressEnable [on|off]svEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainsvEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>svEPathname to DBM file. +ProxyExpressDBMFile <type>svEDBM type of file. +ProxyExpressEnable [on|off]svEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serversvERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serversvERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off svEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off svEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addresssvESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondssvENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addresssvESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondssvENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response header for proxied requests -ReadmeName filenamesvdhBName of the file that will be inserted at the end +ReadmeName filenamesvdhBName of the file that will be inserted at the end of the index listing -ReceiveBufferSize bytes 0 sMTCP receive buffer size -Redirect [status] URL-path -URLsvdhBSends an external redirect asking the client to fetch +ReceiveBufferSize bytes 0 sMTCP receive buffer size +Redirect [status] URL-path +URLsvdhBSends an external redirect asking the client to fetch a different URL -RedirectMatch [status] regex -URLsvdhBSends an external redirect based on a regular expression match +RedirectMatch [status] regex +URLsvdhBSends an external redirect based on a regular expression match of the current URL -RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch +RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch a different URL -RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch +RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch a different URL -ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers -RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...vdhBRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers +RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...vdhBRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...vdhBRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...vdhBRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...vdhBRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...vdhBRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...vdhBRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...vdhBRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...vdhBRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...vdhBRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...vdhBRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...vdhBRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...vdhBRemoves any content type associations for a set of file +RemoveType extension [extension] +...vdhBRemoves any content type associations for a set of file extensions -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP request headers -RequestReadTimeout +svdhEConfigure HTTP request headers +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -svESet timeout values for receiving request headers and body from client. +svESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhBTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhBTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternsvdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternsvdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -svEDefines a mapping function for key-lookup -RewriteOptions OptionssvdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]svdhEDefines rules for the rewriting engine -RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched +RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +svEDefines a mapping function for key-lookup +RewriteOptions OptionssvdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]svdhEDefines rules for the rewriting engine +RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched by Apache httpd children -RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched +RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched by Apache httpd children -RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by +RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by processes launched by Apache httpd children -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for +ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for the child processes -Script method cgi-scriptsvdBActivates a CGI script for a particular request +Script method cgi-scriptsvdBActivates a CGI script for a particular request method. -ScriptAlias URL-path -file-path|directory-pathsvBMaps a URL to a filesystem location and designates the +ScriptAlias URL-path +file-path|directory-pathsvBMaps a URL to a filesystem location and designates the target as a CGI script -ScriptAliasMatch regex -file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression +ScriptAliasMatch regex +file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression and designates the target as a CGI script -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI scripts -ScriptLog file-pathsvBLocation of the CGI script error logfile -ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded +ScriptLog file-pathsvBLocation of the CGI script error logfile +ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded in the scriptlog -ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile -ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with +ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile +ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with the cgi daemon -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters of a request or the last 63, assuming the request itself is greater than 63 chars. -SendBufferSize bytes 0 sMTCP buffer size -ServerAdmin email-address|URLsvCEmail address that the server includes in error +SendBufferSize bytes 0 sMTCP buffer size +ServerAdmin email-address|URLsvCEmail address that the server includes in error messages sent to the client -ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests +ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests to name-virtual hosts -ServerLimit numbersMUpper limit on configurable number of processes -ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify +ServerLimit numbersMUpper limit on configurable number of processes +ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify itself -ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that +ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that is accessed by an incompatible browser -ServerRoot directory-path /usr/local/apache sCBase directory for the server installation -ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response +ServerRoot directory-path /usr/local/apache sCBase directory for the server installation +ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response header -Session On|Off Off svdhEEnables a session for the current directory or location -SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session -SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session -SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off svdhEEnable a per user session -SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the +Session On|Off Off svdhEEnables a session for the current directory or location +SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session +SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session +SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off svdhEEnable a per user session +SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored -SessionHeader headersvdhEImport session updates from a given HTTP response header -SessionInclude pathsvdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session -SetEnv env-variable [value]svdhBSets environment variables -SetEnvIf attribute +SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored +SessionHeader headersvdhEImport session updates from a given HTTP response header +SessionInclude pathsvdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session +SetEnv env-variable [value]svdhBSets environment variables +SetEnvIf attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request -SetEnvIfExpr expr +SetEnvIfExpr expr [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression -SetEnvIfNoCase attribute regex + [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression +SetEnvIfNoCase attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request without respect to case -SetHandler handler-name|NonesvdhCForces all matching files to be processed by a +SetHandler handler-name|NonesvdhCForces all matching files to be processed by a handler -SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST +SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST input -SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the +SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the server -SSIEndTag tag "-->" svBString that ends an include element -SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI +SSIEndTag tag "-->" svBString that ends an include element +SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI error -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.es b/docs/manual/mod/quickreference.html.es index 2d0eedf57f4..9ef570c56d4 100644 --- a/docs/manual/mod/quickreference.html.es +++ b/docs/manual/mod/quickreference.html.es @@ -474,621 +474,630 @@ media type in the HTTP Content-Type header field will exit. Group unix-group #-1 sBGroup under which the server will answer requests -H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP response headers -HeaderName filenamesvdhBName of the file that will be inserted at the top +svdhEConfigure HTTP response headers +HeaderName filenamesvdhBName of the file that will be inserted at the top of the index listing -HeartbeatAddress addr:portsXMulticast address for heartbeat packets -HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending +HeartbeatAddress addr:portsXMulticast address for heartbeat packets +HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data -HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses -IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote +HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data +HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses +IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote user -IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests -<If expression> ... </If>svdhCContains directives that apply only if a condition is +IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests +<If expression> ... </If>svdhCContains directives that apply only if a condition is satisfied by a request at runtime -<IfDefine [!]parameter-name> ... - </IfDefine>svdhCEncloses directives that will be processed only +<IfDefine [!]parameter-name> ... + </IfDefine>svdhCEncloses directives that will be processed only if a test is true at startup -<IfModule [!]module-file|module-identifier> ... - </IfModule>svdhCEncloses directives that are processed conditional on the +<IfModule [!]module-file|module-identifier> ... + </IfModule>svdhCEncloses directives that are processed conditional on the presence or absence of a specific module -<IfVersion [[!]operator] version> ... -</IfVersion>svdhEcontains version dependent configuration -ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files -ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates +<IfVersion [[!]operator] version> ... +</IfVersion>svdhEcontains version dependent configuration +ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files +ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates that are not explicitly mapped -ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling +ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling an imagemap -Include [optional|strict] file-path|directory-path|wildcardsvdCIncludes other configuration files from within +Include [optional|strict] file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within +IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. -IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing +IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. +IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing a directory -IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing +IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing a directory -IndexOptions [+|-]option [[+|-]option] -...svdhBVarious configuration settings for directory +IndexOptions [+|-]option [[+|-]option] +...svdhBVarious configuration settings for directory indexing -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index -IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index -InputSed sed-commanddhXSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index +IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index +InputSed sed-commanddhXSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the error log -ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the query field -ISAPICacheFile file-path [file-path] -...svBISAPI .dll files to be loaded at startup -ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks -ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI +ISAPICacheFile file-path [file-path] +...svBISAPI .dll files to be loaded at startup +ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks +ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI extensions -ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI +ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI extensions -KeepAlive On|Off On svCEnables HTTP persistent connections -KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent +KeepAlive On|Off On svCEnables HTTP persistent connections +KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent requests on a persistent connection -KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to +KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to the specified maximum size, for potential use by filters such as mod_include. -LanguagePriority MIME-lang [MIME-lang] -...svdhBThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...svdhBThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit method [method] ... > ... - </Limit>dhCRestrict enclosed access controls to only certain HTTP +LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit method [method] ... > ... + </Limit>dhCRestrict enclosed access controls to only certain HTTP methods -<LimitExcept method [method] ... > ... - </LimitExcept>dhCRestrict access controls to all HTTP methods +<LimitExcept method [method] ... > ... + </LimitExcept>dhCRestrict access controls to all HTTP methods except the named ones -LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested +LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested subrequests -LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent +LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent from the client -LimitRequestFields number 100 svCLimits the number of HTTP request header fields that +LimitRequestFields number 100 svCLimits the number of HTTP request header fields that will be accepted from the client -LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the +LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the client -LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted +LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted from the client -LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body -Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server +LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body +Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server listens to -ListenBacklog backlogsMMaximum length of the queue of pending connections -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenBacklog backlogsMMaximum length of the queue of pending connections +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile filename [filename] ...svELink in the named object file or library -LoadModule module filenamesvELinks in the object file or library, and adds to the list +LoadFile filename [filename] ...svELink in the named object file or library +LoadModule module filenamesvELinks in the object file or library, and adds to the list of active modules -<Location - URL-path|URL> ... </Location>svCApplies the enclosed directives only to matching +<Location + URL-path|URL> ... </Location>svCApplies the enclosed directives only to matching URLs -<LocationMatch - regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression +<LocationMatch + regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression matching URLs -LogFormat format|nickname -[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel [module:]level +LogFormat format|nickname +[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel [module:]level [module:level] ... - warn svdCControls the verbosity of the ErrorLog -LogMessage message + warn svdCControls the verbosity of the ErrorLog +LogMessage message [hook=hook] [expr=expression] -dXLog user-defined message to error log +dXLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>svdBDefine a configuration file macro -MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server +... </Macro>svdBDefine a configuration file macro +MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server will handle during its life -MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent +MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent connection -MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed +MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed to hold without calling free() -MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete +MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete resource -MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete +MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete resource -MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete +MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete resource -MaxRequestWorkers numbersMMaximum number of connections that will be processed +MaxRequestWorkers numbersMMaximum number of connections that will be processed simultaneously -MaxSpareServers number 10 sMMaximum number of idle child server processes -MaxSpareThreads numbersMMaximum number of idle threads -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections -MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers -MetaDir directory .web svdhEName of the directory to find CERN-style meta information +MaxSpareServers number 10 sMMaximum number of idle child server processes +MaxSpareThreads numbersMMaximum number of idle threads +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections +MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers +MetaDir directory .web svdhEName of the directory to find CERN-style meta information files -MetaFiles on|off off svdhEActivates CERN meta-file processing -MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style +MetaFiles on|off off svdhEActivates CERN meta-file processing +MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style meta information -MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents +MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers number 5 sMMinimum number of idle child server processes -MinSpareThreads numbersMMinimum number of idle threads available to handle request +MinSpareServers number 5 sMMinimum number of idle child server processes +MinSpareThreads numbersMMinimum number of idle threads available to handle request spikes -MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time -ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate -ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time +ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate +ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for a matching file with MultiViews -Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all +Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all or specified mutexes -NameVirtualHost addr[:port]sCDesignates an IP address for name-virtual +NameVirtualHost addr[:port]sCDesignates an IP address for name-virtual hosting -NoProxy host [host] ...svEHosts, domains, or networks that will be connected to +NoProxy host [host] ...svEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]option [[+|-]option] ... All svdhCConfigures what features are available in a particular +NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]option [[+|-]option] ... All svdhCConfigures what features are available in a particular directory - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhXSed command for filtering response content -PassEnv env-variable [env-variable] -...svdhBPasses environment variables from the shell -PidFile filename logs/httpd.pid sMFile where the server records the process ID +OutputSed sed-commanddhXSed command for filtering response content +PassEnv env-variable [env-variable] +...svdhBPasses environment variables from the shell +PidFile filename logs/httpd.pid sMFile where the server records the process ID of the daemon -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protocolsvCProtocol for a listening socket -ProtocolEcho On|Off Off svXTurn the echo server on or off -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a +Protocol protocolsvCProtocol for a listening socket +ProtocolEcho On|Off Off svXTurn the echo server on or off +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...svEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...svEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainsvEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>svEPathname to DBM file. -ProxyExpressDBMFile <type>svEDBM type of file. -ProxyExpressEnable [on|off]svEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainsvEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>svEPathname to DBM file. +ProxyExpressDBMFile <type>svEDBM type of file. +ProxyExpressEnable [on|off]svEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serversvERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serversvERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off svEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off svEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addresssvESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondssvENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addresssvESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondssvENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response header for proxied requests -ReadmeName filenamesvdhBName of the file that will be inserted at the end +ReadmeName filenamesvdhBName of the file that will be inserted at the end of the index listing -ReceiveBufferSize bytes 0 sMTCP receive buffer size -Redirect [status] URL-path -URLsvdhBSends an external redirect asking the client to fetch +ReceiveBufferSize bytes 0 sMTCP receive buffer size +Redirect [status] URL-path +URLsvdhBSends an external redirect asking the client to fetch a different URL -RedirectMatch [status] regex -URLsvdhBSends an external redirect based on a regular expression match +RedirectMatch [status] regex +URLsvdhBSends an external redirect based on a regular expression match of the current URL -RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch +RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch a different URL -RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch +RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch a different URL -ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers -RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...vdhBRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers +RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...vdhBRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...vdhBRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...vdhBRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...vdhBRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...vdhBRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...vdhBRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...vdhBRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...vdhBRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...vdhBRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...vdhBRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...vdhBRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...vdhBRemoves any content type associations for a set of file +RemoveType extension [extension] +...vdhBRemoves any content type associations for a set of file extensions -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP request headers -RequestReadTimeout +svdhEConfigure HTTP request headers +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -svESet timeout values for receiving request headers and body from client. +svESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhBTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhBTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternsvdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternsvdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -svEDefines a mapping function for key-lookup -RewriteOptions OptionssvdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]svdhEDefines rules for the rewriting engine -RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched +RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +svEDefines a mapping function for key-lookup +RewriteOptions OptionssvdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]svdhEDefines rules for the rewriting engine +RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched by Apache httpd children -RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched +RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched by Apache httpd children -RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by +RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by processes launched by Apache httpd children -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for +ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for the child processes -Script method cgi-scriptsvdBActivates a CGI script for a particular request +Script method cgi-scriptsvdBActivates a CGI script for a particular request method. -ScriptAlias URL-path -file-path|directory-pathsvBMaps a URL to a filesystem location and designates the +ScriptAlias URL-path +file-path|directory-pathsvBMaps a URL to a filesystem location and designates the target as a CGI script -ScriptAliasMatch regex -file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression +ScriptAliasMatch regex +file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression and designates the target as a CGI script -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI scripts -ScriptLog file-pathsvBLocation of the CGI script error logfile -ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded +ScriptLog file-pathsvBLocation of the CGI script error logfile +ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded in the scriptlog -ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile -ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with +ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile +ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with the cgi daemon -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters of a request or the last 63, assuming the request itself is greater than 63 chars. -SendBufferSize bytes 0 sMTCP buffer size -ServerAdmin email-address|URLsvCEmail address that the server includes in error +SendBufferSize bytes 0 sMTCP buffer size +ServerAdmin email-address|URLsvCEmail address that the server includes in error messages sent to the client -ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests +ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests to name-virtual hosts -ServerLimit numbersMUpper limit on configurable number of processes -ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify +ServerLimit numbersMUpper limit on configurable number of processes +ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify itself -ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that +ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that is accessed by an incompatible browser -ServerRoot directory-path /usr/local/apache sCBase directory for the server installation -ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response +ServerRoot directory-path /usr/local/apache sCBase directory for the server installation +ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response header -Session On|Off Off svdhEEnables a session for the current directory or location -SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session -SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session -SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off svdhEEnable a per user session -SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the +Session On|Off Off svdhEEnables a session for the current directory or location +SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session +SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session +SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off svdhEEnable a per user session +SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored -SessionHeader headersvdhEImport session updates from a given HTTP response header -SessionInclude pathsvdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session -SetEnv env-variable [value]svdhBSets environment variables -SetEnvIf attribute +SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored +SessionHeader headersvdhEImport session updates from a given HTTP response header +SessionInclude pathsvdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session +SetEnv env-variable [value]svdhBSets environment variables +SetEnvIf attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request -SetEnvIfExpr expr +SetEnvIfExpr expr [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression -SetEnvIfNoCase attribute regex + [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression +SetEnvIfNoCase attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request without respect to case -SetHandler handler-name|NonesvdhCForces all matching files to be processed by a +SetHandler handler-name|NonesvdhCForces all matching files to be processed by a handler -SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST +SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST input -SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the +SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the server -SSIEndTag tag "-->" svBString that ends an include element -SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI +SSIEndTag tag "-->" svBString that ends an include element +SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI error -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.fr b/docs/manual/mod/quickreference.html.fr index a7dbb20e682..75f1ffbc60c 100644 --- a/docs/manual/mod/quickreference.html.fr +++ b/docs/manual/mod/quickreference.html.fr @@ -578,799 +578,808 @@ s'arr Group groupe unix #-1 sBGroupe sous lequel le serveur va traiter les requêtes H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch -H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. -H2MaxWorkers nsEMaximum number of worker threads to use per child process. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MinWorkers nsEMinimal number of worker threads to use per child process. -H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SessionExtraFiles n 5 svENumber of Extra File Handles -H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note en-tête [[expr=]valeur [remplacement] [early|env=[!]variable|expr=expression]] -svdhEConfigure les en-têtes d'une réponse HTTP -HeaderName nom fichiersvdhBNom du fichier qui sera inséré au début de la page +svdhEConfigure les en-têtes d'une réponse HTTP +HeaderName nom fichiersvdhBNom du fichier qui sera inséré au début de la page contenant l'index -HeartbeatAddress addr:portsXAdresse multicast à laquelle envoyer les requêtes +HeartbeatAddress addr:portsXAdresse multicast à laquelle envoyer les requêtes heartbeat -HeartbeatListenaddr:portsXAdresse multicast d'écoute des requêtes entrantes heartbeat -HeartbeatMaxServers nombre-de-serveurs 10 sXSpécifie le nombre maximal de serveurs qui pourront envoyer +HeartbeatListenaddr:portsXAdresse multicast d'écoute des requêtes entrantes heartbeat +HeartbeatMaxServers nombre-de-serveurs 10 sXSpécifie le nombre maximal de serveurs qui pourront envoyer des requêtes heartbeat à ce serveur. -HeartbeatStorage chemin fichier logs/hb.dat sXChemin vers le stockage des données heartbeat -HeartbeatStorage chemin-fichier logs/hb.dat sXIndique le chemin permettant de lire les données +HeartbeatStorage chemin fichier logs/hb.dat sXChemin vers le stockage des données heartbeat +HeartbeatStorage chemin-fichier logs/hb.dat sXIndique le chemin permettant de lire les données heartbeat -HostnameLookups On|Off|Double Off svdCActive la recherche DNS sur les adresses IP des +HostnameLookups On|Off|Double Off svdCActive la recherche DNS sur les adresses IP des clients -IdentityCheck On|Off Off svdEActive la journalisation de l'identité RFC 1413 de +IdentityCheck On|Off Off svdEActive la journalisation de l'identité RFC 1413 de l'utilisateur distant -IdentityCheckTimeout secondes 30 svdEDétermine le délai d'attente pour les requêtes +IdentityCheckTimeout secondes 30 svdEDétermine le délai d'attente pour les requêtes ident -<If expression> ... </If>svdhCContient des directives qui ne s'appliquent que si une +<If expression> ... </If>svdhCContient des directives qui ne s'appliquent que si une condition est satisfaite au cours du traitement d'une requête -<IfDefine [!]paramètre> ... - </IfDefine>svdhCContient des directives qui ne s'appliqueront que si un +<IfDefine [!]paramètre> ... + </IfDefine>svdhCContient des directives qui ne s'appliqueront que si un test retourne "vrai" au démarrage du serveur -<IfModule [!]fichier module|identificateur -module> ... </IfModule>svdhCContient des directives qui ne s'appliquent qu'en fonction +<IfModule [!]fichier module|identificateur +module> ... </IfModule>svdhCContient des directives qui ne s'appliquent qu'en fonction de la présence ou de l'absence d'un module spécifique -<IfVersion [[!]operator] version> ... -</IfVersion>svdhEcontains version dependent configuration -ImapBase map|referer|URL http://nom_serveur/ +svdhBValeur par défaut de la directive base des +<IfVersion [[!]operator] version> ... +</IfVersion>svdhEcontains version dependent configuration +ImapBase map|referer|URL http://nom_serveur/ +svdhBValeur par défaut de la directive base des fichiers imagemap -ImapDefault error|nocontent|map|referer|URL nocontent svdhBAction à entreprendre par défaut lorsqu'un fichier imagemap +ImapDefault error|nocontent|map|referer|URL nocontent svdhBAction à entreprendre par défaut lorsqu'un fichier imagemap est invoqué avec des coordonnées qui ne correspondent à aucune cible -ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction à entreprendre si aucune coordonnée n'est fournie +ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction à entreprendre si aucune coordonnée n'est fournie lorsqu'on invoque un fichier imagemap -Include chemin-fichier|chemin-répertoire|wildcardsvdCInclut d'autres fichiers de configuration dans un des +Include chemin-fichier|chemin-répertoire|wildcardsvdCInclut d'autres fichiers de configuration dans un des fichiers de configuration du serveur -IncludeOptional -chemin-fichier|chemin-répertoire|wildcardsvdCInclusion de fichiers dans le fichier de configuration -IndexHeadInsert "marque ..."svdhBInsère du texte dans la section HEAD de la page +IncludeOptional +chemin-fichier|chemin-répertoire|wildcardsvdCInclusion de fichiers dans le fichier de configuration +IndexHeadInsert "marque ..."svdhBInsère du texte dans la section HEAD de la page d'index. -IndexIgnore fichier [fichier] ... "." svdhBAjouts à la liste des fichiers à cacher lors de l'affichage +IndexIgnore fichier [fichier] ... "." svdhBAjouts à la liste des fichiers à cacher lors de l'affichage de l'index d'un répertoire -IndexIgnoreReset ON|OFFsvdhBVide la liste des fichiers à cacher lors de l'affichage du +IndexIgnoreReset ON|OFFsvdhBVide la liste des fichiers à cacher lors de l'affichage du contenu d'un répertoire -IndexOptions [+|-]option [[+|-]option] -...svdhBDiverses options de configuration pour l'indexation d'un +IndexOptions [+|-]option [[+|-]option] +...svdhBDiverses options de configuration pour l'indexation d'un répertoire -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBDéfinit l'ordre d'affichage par défaut d'un index de +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBDéfinit l'ordre d'affichage par défaut d'un index de répertoire -IndexStyleSheet chemin-urlsvdhBAjoute une feuille de style CSS à l'index du +IndexStyleSheet chemin-urlsvdhBAjoute une feuille de style CSS à l'index du répertoire -InputSed commande-seddhCommande sed à exécuter pour le filtrage des données d'une +InputSed commande-seddhCommande sed à exécuter pour le filtrage des données d'une requête (en général des données POST) -ISAPIAppendLogToErrors on|off off svdhBEnregistrement des requêtes +ISAPIAppendLogToErrors on|off off svdhBEnregistrement des requêtes HSE_APPEND_LOG_PARAMETER de la part des extensions ISAPI dans le journal des erreurs -ISAPIAppendLogToQuery on|off on svdhBEnregistre les requêtes +ISAPIAppendLogToQuery on|off on svdhBEnregistre les requêtes HSE_APPEND_LOG_PARAMETER de la part des extensions ISAPI dans la partie arguments de la requête -ISAPICacheFile chemin-fichier +ISAPICacheFile chemin-fichier [chemin-fichier] -...svBFichiers .dll ISAPI devant être chargés au +...svBFichiers .dll ISAPI devant être chargés au démarrage -ISAPIFakeAsync on|off off svdhBEmulation du support des entrées/sorties asynchrones pour +ISAPIFakeAsync on|off off svdhBEmulation du support des entrées/sorties asynchrones pour les appels ISAPI -ISAPILogNotSupported on|off off svdhBJournalisation des demandes de fonctionnalités non +ISAPILogNotSupported on|off off svdhBJournalisation des demandes de fonctionnalités non supportées de la part des extensions ISAPI -ISAPIReadAheadBuffer taille 49152 svdhBTaille du tampon de lecture anticipée envoyé aux extensions +ISAPIReadAheadBuffer taille 49152 svdhBTaille du tampon de lecture anticipée envoyé aux extensions ISAPI -KeepAlive On|Off On svCActive les connexions HTTP persistantes -KeepAliveTimeout nombre[ms] 5 svCDurée pendant laquelle le serveur va attendre une requête +KeepAlive On|Off On svCActive les connexions HTTP persistantes +KeepAliveTimeout nombre[ms] 5 svCDurée pendant laquelle le serveur va attendre une requête avant de fermer une connexion persistante -KeptBodySize taille maximale en octets 0 dBConserve le corps de la requête à concurrence de la taille +KeptBodySize taille maximale en octets 0 dBConserve le corps de la requête à concurrence de la taille maximale spécifiée, pour une utilisation éventuelle par des filtres comme mod_include. -LanguagePriority langage-MIME [langage-MIME] -...svdhBL'ordre de priorité des variantes de langages pour les +LanguagePriority langage-MIME [langage-MIME] +...svdhBL'ordre de priorité des variantes de langages pour les cas où le client n'a pas formulé de préférences -LDAPCacheEntries nombre 1024 sENombre maximum d'entrées dans le cache LDAP +LDAPCacheEntries nombre 1024 sENombre maximum d'entrées dans le cache LDAP primaire -LDAPCacheTTL secondes 600 sEDurée pendant laquelle les entrées du cache restent +LDAPCacheTTL secondes 600 sEDurée pendant laquelle les entrées du cache restent valides. -LDAPConnectionPoolTTL n -1 svEDésactive les connexions d'arrière-plan qui sont restées +LDAPConnectionPoolTTL n -1 svEDésactive les connexions d'arrière-plan qui sont restées inactives trop longtemps au sein du jeu de connexions. -LDAPConnectionTimeout secondessESpécifie le délai d'attente en secondes de la socket de +LDAPConnectionTimeout secondessESpécifie le délai d'attente en secondes de la socket de connexion -LDAPLibraryDebug 7sEActive le débogage dans le SDK LDAP -LDAPOpCacheEntries nombre 1024 sENombre d'entrées utilisées pour mettre en cache les +LDAPLibraryDebug 7sEActive le débogage dans le SDK LDAP +LDAPOpCacheEntries nombre 1024 sENombre d'entrées utilisées pour mettre en cache les opérations de comparaison LDAP -LDAPOpCacheTTL secondes 600 sEDurée pendant laquelle les entrées du cache d'opérations +LDAPOpCacheTTL secondes 600 sEDurée pendant laquelle les entrées du cache d'opérations restent valides -LDAPReferralHopLimit nombredhELe nombre maximum de redirections vers des serveurs +LDAPReferralHopLimit nombredhELe nombre maximum de redirections vers des serveurs alternatifs (referrals) avant l'abandon de la requête LDAP. -LDAPReferrals On|Off|default On dhEActive la redirection vers des serveurs alternatifs au +LDAPReferrals On|Off|default On dhEActive la redirection vers des serveurs alternatifs au cours des requêtes vers le serveur LDAP. -LDAPRetries nombre d'essais 3 sEDéfinit le nombre maximum de tentatives de connexions au +LDAPRetries nombre d'essais 3 sEDéfinit le nombre maximum de tentatives de connexions au serveur LDAP. -LDAPRetryDelay secondes 0 sEDéfinit le temps d'attente avant un autre essai de connexion au +LDAPRetryDelay secondes 0 sEDéfinit le temps d'attente avant un autre essai de connexion au serveur LDAP. -LDAPSharedCacheFile chemin/fichiersEDéfinit le fichier du cache en mémoire +LDAPSharedCacheFile chemin/fichiersEDéfinit le fichier du cache en mémoire partagée -LDAPSharedCacheSize octets 500000 sETaille en octets du cache en mémoire partagée -LDAPTimeout secondes 60 sESpécifie le délai d'attente pour les opérations de +LDAPSharedCacheSize octets 500000 sETaille en octets du cache en mémoire partagée +LDAPTimeout secondes 60 sESpécifie le délai d'attente pour les opérations de recherche et d'identification LDAP en secondes -LDAPTrustedClientCert type -chemin/nom-fichier/alias [mot de passe]svdhEDéfinit le nom de fichier contenant un certificat client ou +LDAPTrustedClientCert type +chemin/nom-fichier/alias [mot de passe]svdhEDéfinit le nom de fichier contenant un certificat client ou un alias renvoyant vers un certificat client spécifique à une connexion. Tous les SDK LDAP ne supportent pas les certificats clients par connexion. -LDAPTrustedGlobalCert type -chemin/nom-fichier [mot de passe]sEDéfinit le nom de fichier ou la base de données contenant +LDAPTrustedGlobalCert type +chemin/nom-fichier [mot de passe]sEDéfinit le nom de fichier ou la base de données contenant les Autorités de Certification de confiance globales ou les certificats clients globaux -LDAPTrustedMode typesvESpécifie le mode (SSL ou TLS) à utiliser lors de la +LDAPTrustedMode typesvESpécifie le mode (SSL ou TLS) à utiliser lors de la connexion à un serveur LDAP. -LDAPVerifyServerCert On|Off On sEForce la vérification du certificat du +LDAPVerifyServerCert On|Off On sEForce la vérification du certificat du serveur -<Limit méthode [méthode] ... > ... - </Limit>dhCLimite les contrôles d'accès que la section contient à +<Limit méthode [méthode] ... > ... + </Limit>dhCLimite les contrôles d'accès que la section contient à certaines méthodes HTTP -<LimitExcept méthode [méthode] ... > ... - </LimitExcept>dhCApplique les contrôles d'accès à toutes les méthodes HTTP, +<LimitExcept méthode [méthode] ... > ... + </LimitExcept>dhCApplique les contrôles d'accès à toutes les méthodes HTTP, sauf celles qui sont spécifiées -LimitInternalRecursion nombre [nombre] 10 svCDétermine le nombre maximal de redirections internes et de +LimitInternalRecursion nombre [nombre] 10 svCDétermine le nombre maximal de redirections internes et de sous-requêtes imbriquées -LimitRequestBody octets 0 svdhClimite la taille maximale du corps de la requête HTTP +LimitRequestBody octets 0 svdhClimite la taille maximale du corps de la requête HTTP envoyée par le client -LimitRequestFields nombre 100 svCLimite le nombre de champs d'en-tête autorisés dans une +LimitRequestFields nombre 100 svCLimite le nombre de champs d'en-tête autorisés dans une requête HTTP -LimitRequestFieldSize octets 8190 svCDédinit la taille maximale autorisée d'un en-tête de +LimitRequestFieldSize octets 8190 svCDédinit la taille maximale autorisée d'un en-tête de requête HTTP -LimitRequestLine octets 8190 svCDéfinit la taille maximale d'une ligne de requête +LimitRequestLine octets 8190 svCDéfinit la taille maximale d'une ligne de requête HTTP -LimitXMLRequestBody octets 1000000 svdhCDéfinit la taille maximale du corps d'une requête au format +LimitXMLRequestBody octets 1000000 svdhCDéfinit la taille maximale du corps d'une requête au format XML -Listen [adresse IP:]numéro port -[protocole]sMLes adresses IP et ports sur lesquels le serveur écoute -ListenBacklog backlogsMLongueur maximale de la liste d'attente des +Listen [adresse IP:]numéro port +[protocole]sMLes adresses IP et ports sur lesquels le serveur écoute +ListenBacklog backlogsMLongueur maximale de la liste d'attente des connexions -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile nom-fichier [nom-fichier] ...svELiaison du fichier objet ou de la bibliothèque +LoadFile nom-fichier [nom-fichier] ...svELiaison du fichier objet ou de la bibliothèque spécifié -LoadModule module nom-fichiersvELiaison avec le serveur du fichier objet ou de la +LoadModule module nom-fichiersvELiaison avec le serveur du fichier objet ou de la bibliothèque spécifié, et ajout de ce dernier à la liste des modules actifs -<Location - "chemin URL|URL"> ... </Location>svCN'applique les directives contenues qu'aux URLs +<Location + "chemin URL|URL"> ... </Location>svCN'applique les directives contenues qu'aux URLs spécifiées -<LocationMatch - regex> ... </LocationMatch>svCN'applique les directives contenues qu'aux URLs +<LocationMatch + regex> ... </LocationMatch>svCN'applique les directives contenues qu'aux URLs correspondant à une expression rationnelle -LogFormat format|alias -[alias] "%h %l %u %t \"%r\" +svBDécrit un format utilisable dans un fichier +LogFormat format|alias +[alias] "%h %l %u %t \"%r\" +svBDécrit un format utilisable dans un fichier journal -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel [module:]niveau +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel [module:]niveau [module:niveau] ... - warn svdCContrôle la verbosité du journal des erreurs -LogMessage message + warn svdCContrôle la verbosité du journal des erreurs +LogMessage message [hook=hook] [expr=expression] -dXEnregistre des messages personnalisés dans le journal des +dXEnregistre des messages personnalisés dans le journal des erreurs -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXBranche une fonction fournisseur d'autorisation dans mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXBranche une fonction fournisseur d'autorisation dans mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure le cache de code compilé. -LuaHookAccessChecker /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase access_checker du +LuaCodeCache stat|forever|never stat svdhXConfigure le cache de code compilé. +LuaHookAccessChecker /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase access_checker du traitement de la requête -LuaHookAuthChecker /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase auth_checker du +LuaHookAuthChecker /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase auth_checker du traitement de la requête -LuaHookCheckUserID /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase check_user_id du +LuaHookCheckUserID /chemin/vers/lua/script.lua hook_function_name [early|late]svdhXFournit un point d'entrée pour la phase check_user_id du traitement de la requête -LuaHookFixups /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase de correction du +LuaHookFixups /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase de correction du traitement de la requête -LuaHookInsertFilter /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase insert_filter du +LuaHookInsertFilter /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase insert_filter du traitement de la requête -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXPermet une insertion dans la phase de journalisation du +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXPermet une insertion dans la phase de journalisation du traitement d'une requête -LuaHookMapToStorage /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase map_to_storage du +LuaHookMapToStorage /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase map_to_storage du traitement de la requête -LuaHookTranslateName /chemin/vers/lua/script.lua nom_fonction_hook [early|late]svXFournit un point d'entrée à la phase du nom de +LuaHookTranslateName /chemin/vers/lua/script.lua nom_fonction_hook [early|late]svXFournit un point d'entrée à la phase du nom de traduction du traitement de la requête -LuaHookTypeChecker /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase type_checker du +LuaHookTypeChecker /chemin/vers/lua/script.lua hook_function_namesvdhXFournit un point d'entrée pour la phase type_checker du traitement de la requête -LuaInherit none|parent-first|parent-last parent-first svdhXContrôle la manière dont les sections de configuration +LuaInherit none|parent-first|parent-last parent-first svdhXContrôle la manière dont les sections de configuration parentes sont fusionnées dans les enfants -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXFournit une fonction Lua pour le filtrage en entrée -LuaMapHandler modele-uri /chemin/vers/lua/script.lua -[nom-fonction]svdhXMet en correspondance un chemin avec un gestionnaire lua -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXFournit une fonction Lua pour le filtrage de contenu en +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXFournit une fonction Lua pour le filtrage en entrée +LuaMapHandler modele-uri /chemin/vers/lua/script.lua +[nom-fonction]svdhXMet en correspondance un chemin avec un gestionnaire lua +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXFournit une fonction Lua pour le filtrage de contenu en sortie -LuaPackageCPath /chemin/vers/include/?.soasvdhXAjoute un répertoire au package.cpath de lua -LuaPackagePath /chemin/vers/include/?.luasvdhXAjoute un répertoire au package.path de lua -LuaQuickHandler /path/to/script.lua hook_function_namesvdhXFournit un point d'entrée pour la gestion rapide du +LuaPackageCPath /chemin/vers/include/?.soasvdhXAjoute un répertoire au package.cpath de lua +LuaPackagePath /chemin/vers/include/?.luasvdhXAjoute un répertoire au package.path de lua +LuaQuickHandler /path/to/script.lua hook_function_namesvdhXFournit un point d'entrée pour la gestion rapide du traitement de la requête -LuaRoot /chemin/vers/un/répertoiresvdhXSpécifie le chemin de base pour la résolution des chemins +LuaRoot /chemin/vers/un/répertoiresvdhXSpécifie le chemin de base pour la résolution des chemins relatifs dans les directives de mod_lua -LuaScope once|request|conn|thread|server [min] [max] once svdhXUne valeur parmi once, request, conn, thread -- la valeur par défaut est once - +LuaScope once|request|conn|thread|server [min] [max] once svdhXUne valeur parmi once, request, conn, thread -- la valeur par défaut est once + <Macro nom [par1 .. parN]> -... </Macro>svdBDéfinition d'une macro dans un fichier de configuration -MaxConnectionsPerChild number 0 sMLimite le nombre de connexions qu'un processus enfant va +... </Macro>svdBDéfinition d'une macro dans un fichier de configuration +MaxConnectionsPerChild number 0 sMLimite le nombre de connexions qu'un processus enfant va traiter au cours de son fonctionnement -MaxKeepAliveRequests nombre 100 svCNombre de requêtes permises pour une connexion +MaxKeepAliveRequests nombre 100 svCNombre de requêtes permises pour une connexion persistante -MaxMemFree KOctets 2048 sMQuantité maximale de mémoire que l'allocateur principal est +MaxMemFree KOctets 2048 sMQuantité maximale de mémoire que l'allocateur principal est autorisé à conserver sans appeler free() -MaxRangeOverlaps default | unlimited | none | nombre de - chevauchements 20 svdCNombre de chevauchements de segments de données autorisé +MaxRangeOverlaps default | unlimited | none | nombre de + chevauchements 20 svdCNombre de chevauchements de segments de données autorisé (par exemple 100-200,150-300) avant le renvoi de la ressource complète -MaxRangeReversals default | unlimited | none | nombre - d'inversions 20 svdCNombre d'inversions d'ordre autorisé dans la spécification des +MaxRangeReversals default | unlimited | none | nombre + d'inversions 20 svdCNombre d'inversions d'ordre autorisé dans la spécification des segments de données (par exemple 100-200,50-70) avant le renvoi de la ressource complète -MaxRanges default | unlimited | none | nombre de segments 200 svdCNombre de segments de données autorisé avant le renvoi de +MaxRanges default | unlimited | none | nombre de segments 200 svdCNombre de segments de données autorisé avant le renvoi de l'intégralité de la ressource -MaxRequestWorkers nombresMNombre maximum de connexions pouvant être traitées +MaxRequestWorkers nombresMNombre maximum de connexions pouvant être traitées simultanément -MaxSpareServers nombre 10 sMNombre maximum de processus serveurs enfants +MaxSpareServers nombre 10 sMNombre maximum de processus serveurs enfants inactifs -MaxSpareThreads nombresMNombre maximum de threads inactifs -MaxThreads nombre 2048 sMDéfinit le nombre maximum de threads esclaves -MemcacheConnTTL num[units] 15s svEDurée de conservation des connexions inactives -MergeTrailers [on|off] off svCDétermine si les données supplémentaires (trailers) sont +MaxSpareThreads nombresMNombre maximum de threads inactifs +MaxThreads nombre 2048 sMDéfinit le nombre maximum de threads esclaves +MemcacheConnTTL num[units] 15s svEDurée de conservation des connexions inactives +MergeTrailers [on|off] off svCDétermine si les données supplémentaires (trailers) sont fusionnées avec les en-têtes -MetaDir répertoire .web svdhELe nom du répertoire où trouver les fichiers de +MetaDir répertoire .web svdhELe nom du répertoire où trouver les fichiers de métainformations dans le style du CERN -MetaFiles on|off off svdhEActive le traitement des métafichiers du CERN -MetaSuffix suffixe .meta svdhESuffixe du fichier contenant les métainformations dans le +MetaFiles on|off off svdhEActive le traitement des métafichiers du CERN +MetaSuffix suffixe .meta svdhESuffixe du fichier contenant les métainformations dans le style du CERN -MimeMagicFile chemin-fichiersvEActive la détermination du type MIME en se basant sur le +MimeMagicFile chemin-fichiersvEActive la détermination du type MIME en se basant sur le contenu du fichier et en utilisant le fichier magique spécifié -MinSpareServers nombre 5 sMNombre minimum de processus serveurs enfants +MinSpareServers nombre 5 sMNombre minimum de processus serveurs enfants inactifs -MinSpareThreads nombresMNombre minimum de threads inactifs qui seront disponibles +MinSpareThreads nombresMNombre minimum de threads inactifs qui seront disponibles pour pouvoir traiter les pics de requêtes -MMapFile chemin fichier [chemin fichier] ...sXCharge au démarrage une liste de fichiers en mémoire -ModemStandard V.21|V.26bis|V.32|V.92dXStandard de modem à simuler -ModMimeUsePathInfo On|Off Off dBIndique à mod_mime de traiter les éléments +MMapFile chemin fichier [chemin fichier] ...sXCharge au démarrage une liste de fichiers en mémoire +ModemStandard V.21|V.26bis|V.32|V.92dXStandard de modem à simuler +ModMimeUsePathInfo On|Off Off dBIndique à mod_mime de traiter les éléments de path_info en tant que parties du nom de fichier -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBLes types de fichiers qui seront inclus lors d'une +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBLes types de fichiers qui seront inclus lors d'une recherche de correspondance de fichier avec les vues multiples (MultiViews) -Mutex mécanisme [default|nom-mutex] ... [OmitPID] default sCDéfinit les mécanismes de mutex et le repertoire du fichier +Mutex mécanisme [default|nom-mutex] ... [OmitPID] default sCDéfinit les mécanismes de mutex et le repertoire du fichier verrou pour tous les mutex ou seulement les mutex spécifiés -NameVirtualHost adresse[:port]sCOBSOLETE : Définit une adresse IP pour les serveurs virtuels à base de +NameVirtualHost adresse[:port]sCOBSOLETE : Définit une adresse IP pour les serveurs virtuels à base de nom -NoProxy domaine [domaine] ...svEServeurs, domaines ou réseaux auquels on se connectera +NoProxy domaine [domaine] ...svEServeurs, domaines ou réseaux auquels on se connectera directement -NWSSLTrustedCerts nom-fichier -[nom-fichier] ...sBListe de certificats clients supplémentaires -NWSSLUpgradeable [adresse-IP:]num-portsBPermet de promouvoir une connexion non SSL au statut de +NWSSLTrustedCerts nom-fichier +[nom-fichier] ...sBListe de certificats clients supplémentaires +NWSSLUpgradeable [adresse-IP:]num-portsBPermet de promouvoir une connexion non SSL au statut de connexion SSL à la demande -Options - [+|-]option [[+|-]option] ... FollowSymlinks svdhCDéfinit les fonctionnalités disponibles pour un répertoire +Options + [+|-]option [[+|-]option] ... FollowSymlinks svdhCDéfinit les fonctionnalités disponibles pour un répertoire particulier - Order ordre Deny,Allow dhEDéfinit le statut d'accès par défaut et l'ordre dans lequel + Order ordre Deny,Allow dhEDéfinit le statut d'accès par défaut et l'ordre dans lequel les directives Allow et Deny sont évaluées. -OutputSed commande-seddhCommande sed pour le filtrage des contenus de type +OutputSed commande-seddhCommande sed pour le filtrage des contenus de type réponse -PassEnv var-env [var-env] -...svdhBTransmet des variables d'environnement depuis le +PassEnv var-env [var-env] +...svdhBTransmet des variables d'environnement depuis le shell -PidFile nom fichier logs/httpd.pid sMFicher dans lequel le serveur enregistre l'identificateur +PidFile nom fichier logs/httpd.pid sMFicher dans lequel le serveur enregistre l'identificateur de processus du démon -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXFait un compromis entre d'une part l'efficacité et la +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXFait un compromis entre d'une part l'efficacité et la vitesse de traitement et d'autre part la sécurité à l'encontre des codes malicieux supportant les privilèges. -Protocol protocolesvCProtocole pour une socket d'écoute -ProtocolEcho On|Off Off svXActive ou désactive le serveur d'écho -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy url-avec-jokers> ...</Proxy>svEConteneur de directives s'appliquant à des ressources +Protocol protocolesvCProtocole pour une socket d'écoute +ProtocolEcho On|Off Off svXActive ou désactive le serveur d'écho +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy url-avec-jokers> ...</Proxy>svEConteneur de directives s'appliquant à des ressources mandatées -ProxyAddHeaders Off|On On svdEAjoute des informations à propos du mandataire aux +ProxyAddHeaders Off|On On svdEAjoute des informations à propos du mandataire aux en-têtes X-Forwarded-* -ProxyBadHeader IsError|Ignore|StartBody IsError svEDétermine la manière de traiter les lignes d'en-tête +ProxyBadHeader IsError|Ignore|StartBody IsError svEDétermine la manière de traiter les lignes d'en-tête incorrectes d'une réponse -ProxyBlock *|terme|serveur|domaine -[terme|serveur|domaine] ...svETermes, serveurs ou domaines bloqués par le +ProxyBlock *|terme|serveur|domaine +[terme|serveur|domaine] ...svETermes, serveurs ou domaines bloqués par le mandataire -ProxyDomain DomainesvENom de domaine par défaut pour les requêtes +ProxyDomain DomainesvENom de domaine par défaut pour les requêtes mandatées -ProxyErrorOverride On|Off Off svdEOutrepasser les pages d'erreur pour les contenus +ProxyErrorOverride On|Off Off svdEOutrepasser les pages d'erreur pour les contenus mandatés -ProxyExpressDBMFile <chemin>svEChemin du fichier DBM. -ProxyExpressDBMFile <type>svEType de fichier DBM. -ProxyExpressEnable [on|off]svEActive la fonctionnalité du module. -ProxyFtpDirCharset jeu-caractères ISO-8859-1 svdEDéfinit le jeu de caractères des listings FTP +ProxyExpressDBMFile <chemin>svEChemin du fichier DBM. +ProxyExpressDBMFile <type>svEType de fichier DBM. +ProxyExpressEnable [on|off]svEActive la fonctionnalité du module. +ProxyFtpDirCharset jeu-caractères ISO-8859-1 svdEDéfinit le jeu de caractères des listings FTP mandatés -ProxyFtpEscapeWildcards [on|off]svdELes caractères génériques dans les noms de fichiers +ProxyFtpEscapeWildcards [on|off]svdELes caractères génériques dans les noms de fichiers doivent-ils être échappés lorsqu'ils sont envoyés au serveur FTP ? -ProxyFtpListOnWildcard [on|off]svdELes caractères génériques dans les noms de fichiers +ProxyFtpListOnWildcard [on|off]svdELes caractères génériques dans les noms de fichiers demandés doivent-ils déclencher l'affichage d'un listing ? -ProxyHTMLBufSize nb-octetssvdBDéfinit l'incrément de la taille du tampon, ainsi que sa +ProxyHTMLBufSize nb-octetssvdBDéfinit l'incrément de la taille du tampon, ainsi que sa taille initiale, pour la mise en tampon des scripts en ligne et des feuilles de style. -ProxyHTMLCharsetOut jeu-de-caractères | *svdBSpécifie un jeu de caractères pour la sortie de +ProxyHTMLCharsetOut jeu-de-caractères | *svdBSpécifie un jeu de caractères pour la sortie de mod_proxy_html. -ProxyHTMLDocType HTML|XHTML [Legacy]
OU -
ProxyHTMLDocType fpi [SGML|XML]svdBDéfinit une déclaration de type de document HTML ou XHTML. -ProxyHTMLEnable On|Off Off svdBPermet d'activer/désactiver le filtre proxy_html. -ProxyHTMLEvents attribut [attribut ...]svdBSpécifie les attributs à traiter comme des évènements de +ProxyHTMLDocType HTML|XHTML [Legacy]
OU +
ProxyHTMLDocType fpi [SGML|XML]svdBDéfinit une déclaration de type de document HTML ou XHTML. +ProxyHTMLEnable On|Off Off svdBPermet d'activer/désactiver le filtre proxy_html. +ProxyHTMLEvents attribut [attribut ...]svdBSpécifie les attributs à traiter comme des évènements de type scripting. -ProxyHTMLExtended On|Off Off svdBDétermine si l'on doit corriger les liens dans les scripts +ProxyHTMLExtended On|Off Off svdBDétermine si l'on doit corriger les liens dans les scripts en ligne, les feuilles de style et les évènements de type scripting. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBCorrige les erreurs HTML simples. -ProxyHTMLInterp On|Off Off svdBActive la réinterprétation des règles +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBCorrige les erreurs HTML simples. +ProxyHTMLInterp On|Off Off svdBActive la réinterprétation des règles ProxyHTMLURLMap pour chaque requête. -ProxyHTMLLinks élément attribut [attribut2 ...]svdBSpécifie les éléments HTML dont les attributs d'URL doivent +ProxyHTMLLinks élément attribut [attribut2 ...]svdBSpécifie les éléments HTML dont les attributs d'URL doivent être réécrits. -ProxyHTMLMeta On|Off Off svdBActive ou désactive une préinterprétation supplémentaire +ProxyHTMLMeta On|Off Off svdBActive ou désactive une préinterprétation supplémentaire des métadonnées dans les sections HTML <head>. -ProxyHTMLStripComments On|Off Off svdBDétermine si les commentaires HTML doivent être supprimés. -ProxyHTMLURLMap modèle-source modèle-cible [drapeaux] [cond]svdBDéfinit une règle de réécriture des liens HTML -ProxyIOBufferSize octets 8192 svEDétermine la taille du tampon interne de transfert de +ProxyHTMLStripComments On|Off Off svdBDétermine si les commentaires HTML doivent être supprimés. +ProxyHTMLURLMap modèle-source modèle-cible [drapeaux] [cond]svdBDéfinit une règle de réécriture des liens HTML +ProxyIOBufferSize octets 8192 svEDétermine la taille du tampon interne de transfert de données -<ProxyMatch regex> ...</ProxyMatch>svEConteneur de directives s'appliquant à des ressources +<ProxyMatch regex> ...</ProxyMatch>svEConteneur de directives s'appliquant à des ressources mandatées correspondant à une expression rationnelle -ProxyMaxForwards nombre -1 svENombre maximum de mandataires à travers lesquelles une +ProxyMaxForwards nombre -1 svENombre maximum de mandataires à travers lesquelles une requête peut être redirigée -ProxyPass [chemin] !|url [clé=valeur - [clé=valeur ...]] [nocanon] [interpolate] [noquery]svdERéférencer des serveurs distants depuis +ProxyPass [chemin] !|url [clé=valeur + [clé=valeur ...]] [nocanon] [interpolate] [noquery]svdERéférencer des serveurs distants depuis l'espace d'URLs du serveur local -ProxyPassInherit On|Off On svEHéritage des directives ProxyPass définies au niveau du +ProxyPassInherit On|Off On svEHéritage des directives ProxyPass définies au niveau du serveur principal -ProxyPassInterpolateEnv On|Off Off svdEActive l'interpolation des variables d'environnement dans +ProxyPassInterpolateEnv On|Off Off svdEActive l'interpolation des variables d'environnement dans les configurations de mandataires inverses -ProxyPassMatch [regex] !|url +ProxyPassMatch [regex] !|url [clé=valeur - [clé=valeur ...]]svdEFait correspondre des serveurs distants dans l'espace d'URL + [clé=valeur ...]]svdEFait correspondre des serveurs distants dans l'espace d'URL du serveur local en utilisant des expressions rationnelles -ProxyPassReverse [chemin] url -[interpolate]svdEAjuste l'URL dans les en-têtes de la réponse HTTP envoyée +ProxyPassReverse [chemin] url +[interpolate]svdEAjuste l'URL dans les en-têtes de la réponse HTTP envoyée par un serveur mandaté en inverse -ProxyPassReverseCookieDomain domaine-interne -domaine-public [interpolate]svdEAjuste la chaîne correspondant au domaine dans les en-têtes +ProxyPassReverseCookieDomain domaine-interne +domaine-public [interpolate]svdEAjuste la chaîne correspondant au domaine dans les en-têtes Set-Cookie en provenance d'un serveur mandaté -ProxyPassReverseCookiePath chemin-interne -chemin-public [interpolate]svdEAjuste la chaîne correspondant au chemin dans les en-têtes +ProxyPassReverseCookiePath chemin-interne +chemin-public [interpolate]svdEAjuste la chaîne correspondant au chemin dans les en-têtes Set-Cookie en provenance d'un serveur mandaté -ProxyPreserveHost On|Off Off svdEUtilise l'en-tête de requête entrante Host pour la requête +ProxyPreserveHost On|Off Off svdEUtilise l'en-tête de requête entrante Host pour la requête du mandataire -ProxyReceiveBufferSize octets 0 svETaille du tampon réseau pour les connexions mandatées HTTP +ProxyReceiveBufferSize octets 0 svETaille du tampon réseau pour les connexions mandatées HTTP et FTP -ProxyRemote comparaison serveur-distantsvEMandataire distant à utiliser pour traiter certaines +ProxyRemote comparaison serveur-distantsvEMandataire distant à utiliser pour traiter certaines requêtes -ProxyRemoteMatch regex serveur-distantsvELe mandataire distant à utiliser pour traiter les requêtes +ProxyRemoteMatch regex serveur-distantsvELe mandataire distant à utiliser pour traiter les requêtes correspondant à une expression rationnelle -ProxyRequests On|Off Off svEActive la fonctionnalité (standard) de mandataire +ProxyRequests On|Off Off svEActive la fonctionnalité (standard) de mandataire direct -ProxySCGIInternalRedirect On|Off|Headername On svdEActive ou désactive les réponses de redirection interne en +ProxySCGIInternalRedirect On|Off|Headername On svdEActive ou désactive les réponses de redirection interne en provenance du serveur cible. -ProxySCGISendfile On|Off|nom-en-tête Off svdEActive l'évaluation du pseudo en-tête de réponse +ProxySCGISendfile On|Off|nom-en-tête Off svdEActive l'évaluation du pseudo en-tête de réponse X-Sendfile -ProxySet url clé=valeur [clé=valeur ...]dEDéfinit différents paramètres relatifs à la répartition de +ProxySet url clé=valeur [clé=valeur ...]dEDéfinit différents paramètres relatifs à la répartition de charge des mandataires et aux membres des groupes de répartition de charge -ProxySourceAddress adressesvEDéfinit l'adresse IP locale pour les connexions mandatées +ProxySourceAddress adressesvEDéfinit l'adresse IP locale pour les connexions mandatées sortantes -ProxyStatus Off|On|Full Off svEAffiche l'état du répartiteur de charge du mandataire dans +ProxyStatus Off|On|Full Off svEAffiche l'état du répartiteur de charge du mandataire dans mod_status -ProxyTimeout secondessvEDélai d'attente réseau pour les requêtes +ProxyTimeout secondessvEDélai d'attente réseau pour les requêtes mandatées -ProxyVia On|Off|Full|Block Off svEInformation fournie dans l'en-tête de réponse HTTP +ProxyVia On|Off|Full|Block Off svEInformation fournie dans l'en-tête de réponse HTTP Via pour les requêtes mandatées -ReadmeName nom-fichiersvdhBNom du fichier dont le contenu sera inséré à la fin de +ReadmeName nom-fichiersvdhBNom du fichier dont le contenu sera inséré à la fin de l'index -ReceiveBufferSize octets 0 sMTaille du tampon TCP en entrée -Redirect [état] chemin URL -URLsvdhBEnvoie une redirection externe demandant au client +ReceiveBufferSize octets 0 sMTaille du tampon TCP en entrée +Redirect [état] chemin URL +URLsvdhBEnvoie une redirection externe demandant au client d'effectuer une autre requête avec une URL différente -RedirectMatch [état] regex -URLsvdhBEnvoie une redirection externe faisant appel aux +RedirectMatch [état] regex +URLsvdhBEnvoie une redirection externe faisant appel aux expressions rationnelles pour la mise en correspondance de l'URL courante -RedirectPermanent chemin URL URLsvdhBEnvoie une redirection externe permanente demandant au +RedirectPermanent chemin URL URLsvdhBEnvoie une redirection externe permanente demandant au client d'effectuer une nouvelle requête avec une URL différente -RedirectTemp chemin URL URLsvdhBEnvoie une redirection externe temporaire demandant au +RedirectTemp chemin URL URLsvdhBEnvoie une redirection externe temporaire demandant au client d'effectuer une nouvelle requête avec une URL différente -ReflectorHeader en-tête-entrée [en-tête-sortie]svdhBRéfléchit un en-tête d'entrée dans les en-têtes de sortie -RemoteIPHeader en-têtesvBDéfinit le champ d'en-tête qui contiendra les adresses IP +ReflectorHeader en-tête-entrée [en-tête-sortie]svdhBRéfléchit un en-tête d'entrée dans les en-têtes de sortie +RemoteIPHeader en-têtesvBDéfinit le champ d'en-tête qui contiendra les adresses IP du client -RemoteIPInternalProxy -ip-mandataire|ip-mandataire/sous-réseau|nom-hôte ...svBDéclare les adresses IP intranet clients comme dignes de +RemoteIPInternalProxy +ip-mandataire|ip-mandataire/sous-réseau|nom-hôte ...svBDéclare les adresses IP intranet clients comme dignes de confiance pour présenter la valeur RemoteIPHeader -RemoteIPInternalProxyList nom-fichiersvBDéclare les adresses IP intranet clients comme dignes de +RemoteIPInternalProxyList nom-fichiersvBDéclare les adresses IP intranet clients comme dignes de confiance pour présenter la valeur RemoteIPHeader -RemoteIPProxiesHeader Nom_en-têtesvBDéclare le champ d'en-tête qui contiendra toutes les +RemoteIPProxiesHeader Nom_en-têtesvBDéclare le champ d'en-tête qui contiendra toutes les adresses IP intermédiaires -RemoteIPTrustedProxy -ip-mandataire|ip-mandataire/sous-réseau|nom-hôte ...svBDéclare les adresses IP intranet clients comme dignes de +RemoteIPTrustedProxy +ip-mandataire|ip-mandataire/sous-réseau|nom-hôte ...svBDéclare les adresses IP intranet clients comme dignes de confiance pour présenter la valeur RemoteIPHeader -RemoteIPTrustedProxyList nom-fichiersvBDéclare les adresses IP intranet clients comme dignes de +RemoteIPTrustedProxyList nom-fichiersvBDéclare les adresses IP intranet clients comme dignes de confiance pour présenter la valeur RemoteIPHeader -RemoveCharset extension [extension] -...vdhBSupprime toute association de jeu de caractères pour un +RemoveCharset extension [extension] +...vdhBSupprime toute association de jeu de caractères pour un ensemble d'extensions de noms de fichiers -RemoveEncoding extension [extension] -...vdhBSupprime toute association de codage de contenu pour un +RemoveEncoding extension [extension] +...vdhBSupprime toute association de codage de contenu pour un ensemble d'extensions de noms de fichiers -RemoveHandler extension [extension] -...vdhBSupprime toute association de gestionnaire à un ensemble +RemoveHandler extension [extension] +...vdhBSupprime toute association de gestionnaire à un ensemble d'extensions de noms de fichiers -RemoveInputFilter extension [extension] -...vdhBSupprime toute association de filtre en entrée à un +RemoveInputFilter extension [extension] +...vdhBSupprime toute association de filtre en entrée à un ensemble d'extensions de noms de fichiers -RemoveLanguage extension [extension] -...vdhBSupprime toute association de langue à un ensemble +RemoveLanguage extension [extension] +...vdhBSupprime toute association de langue à un ensemble d'extensions de noms de fichiers -RemoveOutputFilter extension [extension] -...vdhBSupprime toute association de filtre en sortie à un +RemoveOutputFilter extension [extension] +...vdhBSupprime toute association de filtre en sortie à un ensemble d'extensions de noms de fichiers -RemoveType extension [extension] -...vdhBSupprime toute association de type de contenu à un ensemble +RemoveType extension [extension] +...vdhBSupprime toute association de type de contenu à un ensemble d'extensions de noms de fichiers -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset en-tête [[expr=]valeur [remplacement] [early|env=[!]variable|expr=expression]] -svdhEConfigure les en-têtes d'une requête HTTP -RequestReadTimeout +svdhEConfigure les en-têtes d'une requête HTTP +RequestReadTimeout [header=délai[-délai-maxi][,MinRate=taux-mini] [body=délai[-délai-maxi][,MinRate=taux-mini] -svEDéfinit des délais maximums pour la réception des en-têtes +svEDéfinit des délais maximums pour la réception des en-têtes et corps des requêtes en provenance du client. -Require [not] nom-entité [nom-entité] -...dhBVérifie si un utilisateur authentifié a une +Require [not] nom-entité [nom-entité] +...dhBVérifie si un utilisateur authentifié a une autorisation d'accès accordée par un fournisseur d'autorisation. -<RequireAll> ... </RequireAll>dhBRegroupe plusieurs directives d'autorisation dont aucune ne +<RequireAll> ... </RequireAll>dhBRegroupe plusieurs directives d'autorisation dont aucune ne doit échouer et dont au moins une doit retourner un résultat positif pour que la directive globale retourne elle-même un résultat positif. -<RequireAny> ... </RequireAny>dhBRegroupe des directives d'autorisation dont au moins une +<RequireAny> ... </RequireAny>dhBRegroupe des directives d'autorisation dont au moins une doit retourner un résultat positif pour que la directive globale retourne elle-même un résultat positif. -<RequireNone> ... </RequireNone>dhBRegroupe des directives d'autorisation dont aucune ne doit +<RequireNone> ... </RequireNone>dhBRegroupe des directives d'autorisation dont aucune ne doit retourner un résultat positif pour que la directive globale n'échoue pas. -RewriteBase chemin_URLdhEDéfinit l'URL de base pour les réécritures au niveau +RewriteBase chemin_URLdhEDéfinit l'URL de base pour les réécritures au niveau répertoire - RewriteCond - chaîne_de_test expression_de_comparaisonsvdhEDéfinit une condition qui devra être satisfaite pour que + RewriteCond + chaîne_de_test expression_de_comparaisonsvdhEDéfinit une condition qui devra être satisfaite pour que la réécriture soit effectuée -RewriteEngine on|off off svdhEActive ou désactive l'exécution du +RewriteEngine on|off off svdhEActive ou désactive l'exécution du moteur de réécriture -RewriteMap nom_de_la_correspondance type_de_correspondance:source_de_la_correspondance -svEDéfinit une fonction de mise en correspondance pour la +RewriteMap nom_de_la_correspondance type_de_correspondance:source_de_la_correspondance +svEDéfinit une fonction de mise en correspondance pour la recherche de mots-clés -RewriteOptions OptionssvdhEConfigure certaines options spéciales +RewriteOptions OptionssvdhEConfigure certaines options spéciales pour le moteur de réécriture -RewriteRule - Modèle Substitution [drapeaux]svdhEDéfinit les règles pour le moteur de réécriture -RLimitCPU secondes|max [secondes|max]svdhCLimite le temps CPU alloué aux processus initiés par les +RewriteRule + Modèle Substitution [drapeaux]svdhEDéfinit les règles pour le moteur de réécriture +RLimitCPU secondes|max [secondes|max]svdhCLimite le temps CPU alloué aux processus initiés par les processus enfants d'Apache httpd -RLimitMEM octets|max [octets|max]svdhCLimite la mémoire allouée aux processus initiés par les +RLimitMEM octets|max [octets|max]svdhCLimite la mémoire allouée aux processus initiés par les processus enfants d'Apache httpd -RLimitNPROC nombre|max [nombre|max]svdhCLimite le nombre de processus qui peuvent être initiés par +RLimitNPROC nombre|max [nombre|max]svdhCLimite le nombre de processus qui peuvent être initiés par les processus initiés par les processus enfants d'Apache httpd -Satisfy Any|All All dhEInteraction entre le contrôle d'accès en fonction de l'hôte +Satisfy Any|All All dhEInteraction entre le contrôle d'accès en fonction de l'hôte et l'authentification utilisateur -ScoreBoardFile chemin fichier logs/apache_runtime +sMChemin du fichier où sont stockées les données concernant +ScoreBoardFile chemin fichier logs/apache_runtime +sMChemin du fichier où sont stockées les données concernant la coordination des processus enfants -Script méthode script cgisvdBActive un script CGI dans le cas d'une méthode de requête +Script méthode script cgisvdBActive un script CGI dans le cas d'une méthode de requête particulière. -ScriptAlias chemin URL -chemin fichier|chemin répertoiresvBFait correspondre une URL à une zone du système de fichiers -et désigne la cible comme script CGI -ScriptAliasMatch regex +ScriptAlias chemin URL chemin fichier|chemin répertoiresvBFait correspondre une URL à une zone du système de fichiers +et désigne la cible comme script CGI +ScriptAliasMatch regex +chemin fichier|chemin répertoiresvBFait correspondre une URL à une zone du système de fichiers en faisant appel aux expressions rationnelles et en désignant la cible comme un script CGI -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCPermet de localiser l'interpréteur des scripts +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCPermet de localiser l'interpréteur des scripts CGI -ScriptLog chemin fichiersvBChemin du fichier journal des erreurs du script +ScriptLog chemin fichiersvBChemin du fichier journal des erreurs du script CGI -ScriptLogBuffer octets 1024 svBTaille maximale des requêtes PUT ou POST qui seront +ScriptLogBuffer octets 1024 svBTaille maximale des requêtes PUT ou POST qui seront enregistrées dans le journal du script -ScriptLogLength octets 10385760 svBTaille maximale du fichier journal des scripts +ScriptLogLength octets 10385760 svBTaille maximale du fichier journal des scripts CGI -ScriptSock chemin fichier cgisock sBLe préfixe du nom de fichier du socket à utiliser pour +ScriptSock chemin fichier cgisock sBLe préfixe du nom de fichier du socket à utiliser pour communiquer avec le démon CGI -SecureListen [adresse-IP:]num-port -nom-certificat [MUTUAL]sBActive le chiffrement SSL pour le port +SecureListen [adresse-IP:]num-port +nom-certificat [MUTUAL]sBActive le chiffrement SSL pour le port spécifié -SeeRequestTail On|Off Off sCDétermine si mod_status affiche les 63 premiers caractères +SeeRequestTail On|Off Off sCDétermine si mod_status affiche les 63 premiers caractères d'une requête ou les 63 derniers, en supposant que la requête elle-même possède plus de 63 caractères. -SendBufferSize octets 0 sMTaille du tampon TCP en sortie -ServerAdmin adresse électronique|URLsvCL'adresse électronique que le serveur inclut dans les +SendBufferSize octets 0 sMTaille du tampon TCP en sortie +ServerAdmin adresse électronique|URLsvCL'adresse électronique que le serveur inclut dans les messages d'erreur envoyés au client -ServerAlias nom serveur [nom serveur] -...vCAutres noms d'un serveur utilisables pour atteindre des +ServerAlias nom serveur [nom serveur] +...vCAutres noms d'un serveur utilisables pour atteindre des serveurs virtuels à base de nom -ServerLimit nombresMLimite supérieure de la définition du nombre de +ServerLimit nombresMLimite supérieure de la définition du nombre de processus -ServerName [protocole://]nom de domaine -entièrement qualifié[:port]svCNom d'hôte et port que le serveur utilise pour +ServerName [protocole://]nom de domaine +entièrement qualifié[:port]svCNom d'hôte et port que le serveur utilise pour s'authentifier lui-même -ServerPath chemin d'URLvCNom de chemin d'URL hérité pour un serveur virtuel à base +ServerPath chemin d'URLvCNom de chemin d'URL hérité pour un serveur virtuel à base de nom accédé par un navigateur incompatible -ServerRoot chemin de répertoire /usr/local/apache sCRacine du répertoire d'installation du +ServerRoot chemin de répertoire /usr/local/apache sCRacine du répertoire d'installation du serveur -ServerSignature On|Off|EMail Off svdhCDéfinit un pied de page pour les documents générés par le +ServerSignature On|Off|EMail Off svdhCDéfinit un pied de page pour les documents générés par le serveur -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigure l'en-tête Server de la réponse +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigure l'en-tête Server de la réponse HTTP -Session On|Off Off svdhEOuvre une session pour le contexte courant -SessionCookieName nom attributssvdhENom et attributs du cookie RFC2109 dans lequel la session +Session On|Off Off svdhEOuvre une session pour le contexte courant +SessionCookieName nom attributssvdhENom et attributs du cookie RFC2109 dans lequel la session est stockée -SessionCookieName2 nom attributssvdhENom et attributs pour le cookie RFC2965 dans lequel est +SessionCookieName2 nom attributssvdhENom et attributs pour le cookie RFC2965 dans lequel est stockée la session -SessionCookieRemove On|Off Off svdhEDétermine si les cookies de session doivent être supprimés +SessionCookieRemove On|Off Off svdhEDétermine si les cookies de session doivent être supprimés des en-têtes HTTP entrants -SessionCryptoCipher algorithmesvdhXL'algorithme à utiliser pour le chiffrement de la session -SessionCryptoDriver nom [param[=valeur]]sXLe pilote de chiffrement à utiliser pour chiffrer les +SessionCryptoCipher algorithmesvdhXL'algorithme à utiliser pour le chiffrement de la session +SessionCryptoDriver nom [param[=valeur]]sXLe pilote de chiffrement à utiliser pour chiffrer les sessions -SessionCryptoPassphrase secret [ secret ... ] svdhXLa clé utilisée pour chiffrer la session -SessionCryptoPassphraseFile nom-fichiersvdXLe fichier contenant les clés utilisées pour chiffrer la +SessionCryptoPassphrase secret [ secret ... ] svdhXLa clé utilisée pour chiffrer la session +SessionCryptoPassphraseFile nom-fichiersvdXLe fichier contenant les clés utilisées pour chiffrer la session -SessionDBDCookieName nom attributssvdhENom et attributs du cookie RFC2109 qui contient +SessionDBDCookieName nom attributssvdhENom et attributs du cookie RFC2109 qui contient l'identifiant de session -SessionDBDCookieName2 nom attributssvdhENom et attributs du cookie RFC2965 qui contient +SessionDBDCookieName2 nom attributssvdhENom et attributs du cookie RFC2965 qui contient l'identifiant de session -SessionDBDCookieRemove On|Off On svdhEDétermine si les cookies de session doivent être supprimés +SessionDBDCookieRemove On|Off On svdhEDétermine si les cookies de session doivent être supprimés des en-têtes HTTP entrants -SessionDBDDeleteLabel étiquette deletesession svdhELa requête SQL à utiliser pour supprimer des sessions de la +SessionDBDDeleteLabel étiquette deletesession svdhELa requête SQL à utiliser pour supprimer des sessions de la base de données -SessionDBDInsertLabel étiquette insertsession svdhELa requête SQL à utiliser pour insérer des sessions dans la +SessionDBDInsertLabel étiquette insertsession svdhELa requête SQL à utiliser pour insérer des sessions dans la base de données -SessionDBDPerUser On|Off Off svdhEActive une session propre à un utilisateur -SessionDBDSelectLabel étiquette selectsession svdhELa requête SQL à utiliser pour sélectionner des sessions +SessionDBDPerUser On|Off Off svdhEActive une session propre à un utilisateur +SessionDBDSelectLabel étiquette selectsession svdhELa requête SQL à utiliser pour sélectionner des sessions dans la base de données -SessionDBDUpdateLabel étiquette updatesession svdhELa requête SQL à utiliser pour mettre à jour des sessions +SessionDBDUpdateLabel étiquette updatesession svdhELa requête SQL à utiliser pour mettre à jour des sessions préexistantes dans la base de données -SessionEnv On|Off Off svdhEDéfinit si le contenu de la session doit être enregistré +SessionEnv On|Off Off svdhEDéfinit si le contenu de la session doit être enregistré dans la variable d'environnement HTTP_SESSION -SessionExclude cheminsvdhEDéfinit les préfixes d'URLs pour lesquels une session sera +SessionExclude cheminsvdhEDéfinit les préfixes d'URLs pour lesquels une session sera ignorée -SessionHeader en-têtesvdhEImportation des mises à jour de session depuis l'en-tête de +SessionHeader en-têtesvdhEImportation des mises à jour de session depuis l'en-tête de réponse HTTP spécifié -SessionInclude cheminsvdhEDéfinit les préfixes d'URL pour lesquels une session est +SessionInclude cheminsvdhEDéfinit les préfixes d'URL pour lesquels une session est valide -SessionMaxAge durée de vie maximale 0 svdhEDéfinit une durée de vie maximale pour la session en +SessionMaxAge durée de vie maximale 0 svdhEDéfinit une durée de vie maximale pour la session en secondes -SetEnv var-env [valeur]svdhBDéfinit des variables d'environnement -SetEnvIf attribut +SetEnv var-env [valeur]svdhBDéfinit des variables d'environnement +SetEnvIf attribut regex [!]env-variable[=valeur] - [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction des + [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction des attributs de la requête -SetEnvIfExpr expr +SetEnvIfExpr expr [!]env-variable[=valeur] - [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction d'une expression ap_expr -SetEnvIfNoCase attribut regex + [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction d'une expression ap_expr +SetEnvIfNoCase attribut regex [!]env-variable[=valeur] - [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction des + [[!]env-variable[=valeur]] ...svdhBDéfinit des variables d'environnement en fonction des attributs de la requête sans tenir compte de la casse -SetHandler nom gestionnaire|NonesvdhCForce le traitement des fichiers spécifiés par un +SetHandler nom gestionnaire|NonesvdhCForce le traitement des fichiers spécifiés par un gestionnaire particulier -SetInputFilter filtre[;filtre...]svdhCDéfinit les filtres par lesquels vont passer les requêtes +SetInputFilter filtre[;filtre...]svdhCDéfinit les filtres par lesquels vont passer les requêtes client et les données POST -SetOutputFilter filtre[;filtre...]svdhCDéfinit les filtres par lesquels vont passer les réponses +SetOutputFilter filtre[;filtre...]svdhCDéfinit les filtres par lesquels vont passer les réponses du serveur -SSIEndTag tag "-->" svBChaîne qui termine l'élément include -SSIErrorMsg message "[an error occurred +svdhBMessage d'erreur affiché lorsqu'une erreur SSI +SSIEndTag tag "-->" svBChaîne qui termine l'élément include +SSIErrorMsg message "[an error occurred +svdhBMessage d'erreur affiché lorsqu'une erreur SSI survient -SSIETag on|off off dhBDéfinit si des en-têtes ETags sont générés par le serveur. -SSILastModified on|off off dhBDéfinit si des en-têtes Last-Modified sont +SSIETag on|off off dhBDéfinit si des en-têtes ETags sont générés par le serveur. +SSILastModified on|off off dhBDéfinit si des en-têtes Last-Modified sont générés par le serveur. -SSILegacyExprParser on|off off dhBActive le mode de compatibilité pour les expressions +SSILegacyExprParser on|off off dhBActive le mode de compatibilité pour les expressions conditionnelles. -SSIStartTag tag "" svBinclude è¦ç´ ãçµäºãããæåå -SSIErrorMsg message "[an error occurred +svdhBSSI ã®ã¨ã©ã¼ããã£ãã¨ãã«è¡¨ç¤ºãããã¨ã©ã¼ã¡ãã»ã¼ã¸ -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the + [[!]env-variable[=value]] ...svdhBãªã¯ã¨ã¹ãã®å±æ§ã«åºã¥ãã¦å¤§æåå°æåãåºå¥ããã«ç°å¢å¤æ°ãè¨å®ãã +SetHandler handler-name|NonesvdhCããããããã¡ã¤ã«ããã³ãã©ã§å¦çãããããã«ãã +SetInputFilter filter[;filter...]svdhCã¯ã©ã¤ã¢ã³ãã®ãªã¯ã¨ã¹ãã POST ã®å¥åãå¦çãããã£ã«ã¿ãè¨å®ãã +SetOutputFilter filter[;filter...]svdhCãµã¼ãã®å¿çãå¦çãããã£ã«ã¿ãè¨å®ãã +SSIEndTag tag "-->" svBinclude è¦ç´ ãçµäºãããæåå +SSIErrorMsg message "[an error occurred +svdhBSSI ã®ã¨ã©ã¼ããã£ãã¨ãã«è¡¨ç¤ºãããã¨ã©ã¼ã¡ãã»ã¼ã¸ +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.ko.euc-kr b/docs/manual/mod/quickreference.html.ko.euc-kr index 05c35b048a1..f962d10cd19 100644 --- a/docs/manual/mod/quickreference.html.ko.euc-kr +++ b/docs/manual/mod/quickreference.html.ko.euc-kr @@ -443,602 +443,611 @@ media type in the HTTP Content-Type header field will exit. Group unix-group #-1 sBGroup under which the server will answer requests -H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] set|append|add|unset|echo -header [value] [early|env=[!]variable]svdhEHTTP ÀÀ´ä Çì´õ¸¦ ±¸¼ºÇÑ´Ù -HeaderName filenamesvdhBÆÄÀÏ¸ñ·Ï À§¿¡ »ðÀÔÇÒ ÆÄÀÏÀÇ ÀÌ¸§ -HeartbeatAddress addr:portsXMulticast address for heartbeat packets -HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] set|append|add|unset|echo +header [value] [early|env=[!]variable]svdhEHTTP ÀÀ´ä Çì´õ¸¦ ±¸¼ºÇÑ´Ù +HeaderName filenamesvdhBÆÄÀÏ¸ñ·Ï À§¿¡ »ðÀÔÇÒ ÆÄÀÏÀÇ ÀÌ¸§ +HeartbeatAddress addr:portsXMulticast address for heartbeat packets +HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data -HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses -IdentityCheck On|Off Off svdE¿ø°Ý »ç¿ëÀÚÀÇ RFC 1413 ½Å¿øÀ» ·Î±×¿¡ ±â·ÏÇÑ´Ù -IdentityCheckTimeout seconds 30 svdEident ¿äÃ»ÀÇ ½Ã°£Á¦ÇÑÀ» ÁöÁ¤ÇÑ´Ù -<If expression> ... </If>svdhCContains directives that apply only if a condition is +HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data +HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses +IdentityCheck On|Off Off svdE¿ø°Ý »ç¿ëÀÚÀÇ RFC 1413 ½Å¿øÀ» ·Î±×¿¡ ±â·ÏÇÑ´Ù +IdentityCheckTimeout seconds 30 svdEident ¿äÃ»ÀÇ ½Ã°£Á¦ÇÑÀ» ÁöÁ¤ÇÑ´Ù +<If expression> ... </If>svdhCContains directives that apply only if a condition is satisfied by a request at runtime -<IfDefine [!]parameter-name> ... - </IfDefine>svdhCEncloses directives that will be processed only +<IfDefine [!]parameter-name> ... + </IfDefine>svdhCEncloses directives that will be processed only if a test is true at startup -<IfModule [!]module-file|module-identifier> ... - </IfModule>svdhCEncloses directives that are processed conditional on the +<IfModule [!]module-file|module-identifier> ... + </IfModule>svdhCEncloses directives that are processed conditional on the presence or absence of a specific module -<IfVersion [[!]operator] version> ... -</IfVersion>svdhE¹öÀüº° ¼³Á¤À» ¹´Â´Ù -ImapBase map|referer|URL http://servername/ svdhBÀÌ¹ÌÁö¸Ê ÆÄÀÏ¿¡¼ base ±âº»°ª -ImapDefault error|nocontent|map|referer|URL nocontent svdhBÀÌ¹ÌÁö¸Ê¿¡ ¾î´À ¿µ¿ª¿¡µµ ÇØ´çÇÏÁö ¾Ê´Â ÁÂÇ¥¸¦ ÁØ +<IfVersion [[!]operator] version> ... +</IfVersion>svdhE¹öÀüº° ¼³Á¤À» ¹´Â´Ù +ImapBase map|referer|URL http://servername/ svdhBÀÌ¹ÌÁö¸Ê ÆÄÀÏ¿¡¼ base ±âº»°ª +ImapDefault error|nocontent|map|referer|URL nocontent svdhBÀÌ¹ÌÁö¸Ê¿¡ ¾î´À ¿µ¿ª¿¡µµ ÇØ´çÇÏÁö ¾Ê´Â ÁÂÇ¥¸¦ ÁØ °æ¿ì ±âº» Çàµ¿ -ImapMenu none|formatted|semiformatted|unformattedsvdhBÁÂÇ¥¾øÀÌ ÀÌ¹ÌÁö¸Ê ¿äÃ»½Ã ÃëÇÒ Çàµ¿ -Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within +ImapMenu none|formatted|semiformatted|unformattedsvdhBÁÂÇ¥¾øÀÌ ÀÌ¹ÌÁö¸Ê ¿äÃ»½Ã ÃëÇÒ Çàµ¿ +Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within +IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -svdhBInserts text in the HEAD section of an index page. -IndexIgnore file [file] ...svdhBµð·ºÅä¸® ¸ñ·Ï¿¡¼ ¼û±æ ÆÄÀÏ¸ñ·ÏÀ» Ãß°¡ÇÑ´Ù -IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing +svdhBInserts text in the HEAD section of an index page. +IndexIgnore file [file] ...svdhBµð·ºÅä¸® ¸ñ·Ï¿¡¼ ¼û±æ ÆÄÀÏ¸ñ·ÏÀ» Ãß°¡ÇÑ´Ù +IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing a directory -IndexOptions [+|-]option [[+|-]option] -...svdhBµð·ºÅä¸® ¸ñ·ÏÀÇ ¿©·¯ ¼³Á¤µé -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBµð·ºÅä¸® ¸ñ·ÏÀÇ ±âº» ¼ø¼¸¦ ¼³Á¤ÇÑ´Ù -IndexStyleSheet url-pathsvdhBµð·ºÅä¸® ¸ñ·Ï¿¡ CSS ½ºÅ¸ÀÏ½¬Æ®¸¦ Ãß°¡ÇÑ´Ù -InputSed sed-commanddhXSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off svdhBISAPI exntensionÀÇ HSE_APPEND_LOG_PARAMETER +IndexOptions [+|-]option [[+|-]option] +...svdhBµð·ºÅä¸® ¸ñ·ÏÀÇ ¿©·¯ ¼³Á¤µé +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBµð·ºÅä¸® ¸ñ·ÏÀÇ ±âº» ¼ø¼¸¦ ¼³Á¤ÇÑ´Ù +IndexStyleSheet url-pathsvdhBµð·ºÅä¸® ¸ñ·Ï¿¡ CSS ½ºÅ¸ÀÏ½¬Æ®¸¦ Ãß°¡ÇÑ´Ù +InputSed sed-commanddhXSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off svdhBISAPI exntensionÀÇ HSE_APPEND_LOG_PARAMETER ¿äÃ»À» ¿À·ù ·Î±×¿¡ ±â·ÏÇÑ´Ù -ISAPIAppendLogToQuery on|off on svdhBISAPI exntensionÀÇ HSE_APPEND_LOG_PARAMETER +ISAPIAppendLogToQuery on|off on svdhBISAPI exntensionÀÇ HSE_APPEND_LOG_PARAMETER ¿äÃ»À» ÁúÀÇ¹®ÀÚ¿¿¡ ±â·ÏÇÑ´Ù -ISAPICacheFile file-path [file-path] -...svB¼¹ö°¡ ½ÃÀÛÇÒ¶§ ¸Þ¸ð¸®·Î ÀÐ¾îµéÀÏ ISAPI .dll ÆÄÀÏµé -ISAPIFakeAsync on|off off svdhBºñµ¿±â ISAPI ÄÝ¹éÀ» Áö¿øÇÏ´Â Ã´ÇÑ´Ù -ISAPILogNotSupported on|off off svdhBISAPI extensionÀÌ Áö¿øÇÏÁö ¾Ê´Â ±â´ÉÀ» ¿äÃ»ÇÏ¸é +ISAPICacheFile file-path [file-path] +...svB¼¹ö°¡ ½ÃÀÛÇÒ¶§ ¸Þ¸ð¸®·Î ÀÐ¾îµéÀÏ ISAPI .dll ÆÄÀÏµé +ISAPIFakeAsync on|off off svdhBºñµ¿±â ISAPI ÄÝ¹éÀ» Áö¿øÇÏ´Â Ã´ÇÑ´Ù +ISAPILogNotSupported on|off off svdhBISAPI extensionÀÌ Áö¿øÇÏÁö ¾Ê´Â ±â´ÉÀ» ¿äÃ»ÇÏ¸é ·Î±×¿¡ ±â·ÏÇÑ´Ù -ISAPIReadAheadBuffer size 49152 svdhBISAPI extensionÀÇ ¹Ì¸®ÀÐ±â¹öÆÛ(read ahead buffer) +ISAPIReadAheadBuffer size 49152 svdhBISAPI extensionÀÇ ¹Ì¸®ÀÐ±â¹öÆÛ(read ahead buffer) Å©±â -KeepAlive On|Off On svCEnables HTTP persistent connections -KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent +KeepAlive On|Off On svCEnables HTTP persistent connections +KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent requests on a persistent connection -KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to +KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to the specified maximum size, for potential use by filters such as mod_include. -LanguagePriority MIME-lang [MIME-lang] -...svdhBThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...svdhBThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit method [method] ... > ... - </Limit>dhCRestrict enclosed access controls to only certain HTTP +LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit method [method] ... > ... + </Limit>dhCRestrict enclosed access controls to only certain HTTP methods -<LimitExcept method [method] ... > ... - </LimitExcept>dhCRestrict access controls to all HTTP methods +<LimitExcept method [method] ... > ... + </LimitExcept>dhCRestrict access controls to all HTTP methods except the named ones -LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested +LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested subrequests -LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent +LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent from the client -LimitRequestFields number 100 svCLimits the number of HTTP request header fields that +LimitRequestFields number 100 svCLimits the number of HTTP request header fields that will be accepted from the client -LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the +LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the client -LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted +LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted from the client -LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body -Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server +LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body +Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server listens to -ListenBacklog backlogsMMaximum length of the queue of pending connections -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenBacklog backlogsMMaximum length of the queue of pending connections +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile filename [filename] ...sEÁöÁ¤ÇÑ ¸ñÀûÆÄÀÏÀÌ³ª ¶óÀÌºê·¯¸®¸¦ ÀÐ¾îµéÀÎ´Ù -LoadModule module filenamesE¸ñÀûÆÄÀÏÀÌ³ª ¶óÀÌºê·¯¸®¸¦ ÀÐ¾îµéÀÌ°í, »ç¿ë°¡´ÉÇÑ +LoadFile filename [filename] ...sEÁöÁ¤ÇÑ ¸ñÀûÆÄÀÏÀÌ³ª ¶óÀÌºê·¯¸®¸¦ ÀÐ¾îµéÀÎ´Ù +LoadModule module filenamesE¸ñÀûÆÄÀÏÀÌ³ª ¶óÀÌºê·¯¸®¸¦ ÀÐ¾îµéÀÌ°í, »ç¿ë°¡´ÉÇÑ ¸ðµâ ¸ñ·Ï¿¡ Ãß°¡ÇÑ´Ù -<Location - "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching +<Location + "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching URLs -<LocationMatch - regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression +<LocationMatch + regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression matching URLs -LogFormat format|nickname -[nickname] "%h %l %u %t \"%r\" +svB·Î±×ÆÄÀÏ¿¡ »ç¿ëÇÒ Çü½ÄÀ» ±â¼úÇÑ´Ù -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel [module:]level +LogFormat format|nickname +[nickname] "%h %l %u %t \"%r\" +svB·Î±×ÆÄÀÏ¿¡ »ç¿ëÇÒ Çü½ÄÀ» ±â¼úÇÑ´Ù +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel [module:]level [module:level] ... - warn svdCControls the verbosity of the ErrorLog -LogMessage message + warn svdCControls the verbosity of the ErrorLog +LogMessage message [hook=hook] [expr=expression] -dXLog user-defined message to error log +dXLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>svdBDefine a configuration file macro -MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server +... </Macro>svdBDefine a configuration file macro +MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server will handle during its life -MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent +MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent connection -MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed +MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed to hold without calling free() -MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete +MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete resource -MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete +MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete resource -MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete +MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete resource -MaxRequestWorkers numbersMMaximum number of connections that will be processed +MaxRequestWorkers numbersMMaximum number of connections that will be processed simultaneously -MaxSpareServers number 10 sMMaximum number of idle child server processes -MaxSpareThreads numbersMMaximum number of idle threads -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections -MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers -MetaDir directory .web svdhECERN ¸ÞÅ¸Á¤º¸¸¦ Ã£À» µð·ºÅä¸® ÀÌ¸§ -MetaFiles on|off off svdhECERN ¸ÞÅ¸ÆÄÀÏÀ» Ã³¸®ÇÑ´Ù -MetaSuffix suffix .meta svdhECERN ¸ÞÅ¸Á¤º¸¸¦ ÀúÀåÇÏ´Â ÆÄÀÏÀÇ Á¢¹Ì»ç -MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents +MaxSpareServers number 10 sMMaximum number of idle child server processes +MaxSpareThreads numbersMMaximum number of idle threads +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections +MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers +MetaDir directory .web svdhECERN ¸ÞÅ¸Á¤º¸¸¦ Ã£À» µð·ºÅä¸® ÀÌ¸§ +MetaFiles on|off off svdhECERN ¸ÞÅ¸ÆÄÀÏÀ» Ã³¸®ÇÑ´Ù +MetaSuffix suffix .meta svdhECERN ¸ÞÅ¸Á¤º¸¸¦ ÀúÀåÇÏ´Â ÆÄÀÏÀÇ Á¢¹Ì»ç +MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers number 5 sMMinimum number of idle child server processes -MinSpareThreads numbersMMinimum number of idle threads available to handle request +MinSpareServers number 5 sMMinimum number of idle child server processes +MinSpareThreads numbersMMinimum number of idle threads available to handle request spikes -MMapFile file-path [file-path] ...sX½ÃÀÛ½Ã ¿©·¯ ÆÄÀÏÀ» ¸Þ¸ð¸®¿¡ ´ëÀÀÇÑ´Ù -ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate -ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sX½ÃÀÛ½Ã ¿©·¯ ÆÄÀÏÀ» ¸Þ¸ð¸®¿¡ ´ëÀÀÇÑ´Ù +ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate +ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for a matching file with MultiViews -Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all +Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all or specified mutexes -NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual +NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual hosting -NoProxy host [host] ...svEHosts, domains, or networks that will be connected to +NoProxy host [host] ...svEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular +NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular directory - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhXSed command for filtering response content -PassEnv env-variable [env-variable] -...svdhB½©¿¡¼ È¯°æº¯¼ö¸¦ °¡Á®¿Â´Ù -PidFile filename logs/httpd.pid sMFile where the server records the process ID +OutputSed sed-commanddhXSed command for filtering response content +PassEnv env-variable [env-variable] +...svdhB½©¿¡¼ È¯°æº¯¼ö¸¦ °¡Á®¿Â´Ù +PidFile filename logs/httpd.pid sMFile where the server records the process ID of the daemon -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protocolsvCProtocol for a listening socket -ProtocolEcho On|OffsvXecho ¼¹ö¸¦ Å°°í ²ö´Ù -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a +Protocol protocolsvCProtocol for a listening socket +ProtocolEcho On|OffsvXecho ¼¹ö¸¦ Å°°í ²ö´Ù +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...svEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...svEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainsvEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>svEPathname to DBM file. -ProxyExpressDBMFile <type>svEDBM type of file. -ProxyExpressEnable [on|off]svEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainsvEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>svEPathname to DBM file. +ProxyExpressDBMFile <type>svEDBM type of file. +ProxyExpressEnable [on|off]svEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serversvERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serversvERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off svEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off svEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addresssvESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondssvENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addresssvESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondssvENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response header for proxied requests -ReadmeName filenamesvdhBÆÄÀÏ¸ñ·Ï ¸¶Áö¸·¿¡ »ðÀÔÇÒ ÆÄÀÏÀÇ ÀÌ¸§ -ReceiveBufferSize bytes 0 sMTCP receive buffer size -Redirect [status] URL-path -URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ +ReadmeName filenamesvdhBÆÄÀÏ¸ñ·Ï ¸¶Áö¸·¿¡ »ðÀÔÇÒ ÆÄÀÏÀÇ ÀÌ¸§ +ReceiveBufferSize bytes 0 sMTCP receive buffer size +Redirect [status] URL-path +URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ ¸®´ÙÀÌ·º¼ÇÀ» º¸³½´Ù -RedirectMatch [status] regex -URLsvdhBÇöÀç URLÀÌ Á¤±ÔÇ¥Çö½Ä¿¡ ÇØ´çÇÏ¸é ¿ÜºÎ ¸®´ÙÀÌ·º¼ÇÀ» +RedirectMatch [status] regex +URLsvdhBÇöÀç URLÀÌ Á¤±ÔÇ¥Çö½Ä¿¡ ÇØ´çÇÏ¸é ¿ÜºÎ ¸®´ÙÀÌ·º¼ÇÀ» º¸³½´Ù -RedirectPermanent URL-path URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ +RedirectPermanent URL-path URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ ¿µ±¸ ¸®´ÙÀÌ·º¼ÇÀ» º¸³½´Ù -RedirectTemp URL-path URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ +RedirectTemp URL-path URLsvdhBÅ¬¶óÀÌ¾ðÆ®°¡ ´Ù¸¥ URL¿¡ Á¢¼ÓÇÏµµ·Ï ¿äÃ»ÇÏ´Â ¿ÜºÎ ÀÓ½Ã ¸®´ÙÀÌ·º¼ÇÀ» º¸³½´Ù -ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers -RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...vdhBRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers +RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...vdhBRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...vdhBRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...vdhBRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...vdhBRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...vdhBRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...vdhBRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...vdhBRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...vdhBRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...vdhBRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...vdhBRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...vdhBRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...vdhBRemoves any content type associations for a set of file +RemoveType extension [extension] +...vdhBRemoves any content type associations for a set of file extensions -RequestHeader set|append|add|unset header -[value] [early|env=[!]variable]svdhEHTTP ¿äÃ» Çì´õ¸¦ ±¸¼ºÇÑ´Ù -RequestReadTimeout +RequestHeader set|append|add|unset header +[value] [early|env=[!]variable]svdhEHTTP ¿äÃ» Çì´õ¸¦ ±¸¼ºÇÑ´Ù +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -svESet timeout values for receiving request headers and body from client. +svESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhBTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhBTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternsvdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternsvdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -svEDefines a mapping function for key-lookup -RewriteOptions OptionssvdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]svdhEDefines rules for the rewriting engine -RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched +RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +svEDefines a mapping function for key-lookup +RewriteOptions OptionssvdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]svdhEDefines rules for the rewriting engine +RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched by Apache httpd children -RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched +RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched by Apache httpd children -RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by +RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by processes launched by Apache httpd children -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for +ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for the child processes -Script method cgi-scriptsvdBÆ¯Á¤ ¿äÃ»¸Þ¼µå¿¡ ´ëÇØ CGI ½ºÅ©¸³Æ®¸¦ +Script method cgi-scriptsvdBÆ¯Á¤ ¿äÃ»¸Þ¼µå¿¡ ´ëÇØ CGI ½ºÅ©¸³Æ®¸¦ »ç¿ëÇÑ´Ù. -ScriptAlias URL-path -file-path|directory-pathsvBURLÀ» Æ¯Á¤ ÆÄÀÏ½Ã½ºÅÛ Àå¼Ò·Î ´ëÀÀÇÏ°í ´ë»óÀÌ CGI +ScriptAlias URL-path +file-path|directory-pathsvBURLÀ» Æ¯Á¤ ÆÄÀÏ½Ã½ºÅÛ Àå¼Ò·Î ´ëÀÀÇÏ°í ´ë»óÀÌ CGI ½ºÅ©¸³Æ®¶ó°í ¾Ë¸°´Ù -ScriptAliasMatch regex -file-path|directory-pathsvBÁ¤±ÔÇ¥Çö½ÄÀ» »ç¿ëÇÏ¿© URLÀ» Æ¯Á¤ ÆÄÀÏ½Ã½ºÅÛ Àå¼Ò·Î +ScriptAliasMatch regex +file-path|directory-pathsvBÁ¤±ÔÇ¥Çö½ÄÀ» »ç¿ëÇÏ¿© URLÀ» Æ¯Á¤ ÆÄÀÏ½Ã½ºÅÛ Àå¼Ò·Î ´ëÀÀÇÏ°í ´ë»óÀÌ CGI ½ºÅ©¸³Æ®¶ó°í ¾Ë¸°´Ù -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI scripts -ScriptLog file-pathsvBCGI ½ºÅ©¸³Æ® ¿À·ù·Î±×ÆÄÀÏÀÇ À§Ä¡ -ScriptLogBuffer bytes 1024 svB½ºÅ©¸³Æ® ·Î±×¿¡ ±â·ÏÇÒ PUT È¤Àº POST ¿äÃ»ÀÇ ÃÖ´ë·® -ScriptLogLength bytes 10385760 svBCGI ½ºÅ©¸³Æ® ·Î±×ÆÄÀÏÀÇ Å©±â Á¦ÇÑ -ScriptSock file-path logs/cgisock svBcgi µ¥¸ó°ú Åë½ÅÀ» À§ÇØ »ç¿ëÇÒ ¼ÒÄÏÀÇ ÀÌ¸§ -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters +ScriptLog file-pathsvBCGI ½ºÅ©¸³Æ® ¿À·ù·Î±×ÆÄÀÏÀÇ À§Ä¡ +ScriptLogBuffer bytes 1024 svB½ºÅ©¸³Æ® ·Î±×¿¡ ±â·ÏÇÒ PUT È¤Àº POST ¿äÃ»ÀÇ ÃÖ´ë·® +ScriptLogLength bytes 10385760 svBCGI ½ºÅ©¸³Æ® ·Î±×ÆÄÀÏÀÇ Å©±â Á¦ÇÑ +ScriptSock file-path logs/cgisock svBcgi µ¥¸ó°ú Åë½ÅÀ» À§ÇØ »ç¿ëÇÒ ¼ÒÄÏÀÇ ÀÌ¸§ +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters of a request or the last 63, assuming the request itself is greater than 63 chars. -SendBufferSize bytes 0 sMTCP buffer size -ServerAdmin email-address|URLsvCEmail address that the server includes in error +SendBufferSize bytes 0 sMTCP buffer size +ServerAdmin email-address|URLsvCEmail address that the server includes in error messages sent to the client -ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests +ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests to name-virtual hosts -ServerLimit numbersMUpper limit on configurable number of processes -ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify +ServerLimit numbersMUpper limit on configurable number of processes +ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify itself -ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that +ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that is accessed by an incompatible browser -ServerRoot directory-path /usr/local/apache sCBase directory for the server installation -ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response +ServerRoot directory-path /usr/local/apache sCBase directory for the server installation +ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response header -Session On|Off Off svdhEEnables a session for the current directory or location -SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session -SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session -SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off svdhEEnable a per user session -SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the +Session On|Off Off svdhEEnables a session for the current directory or location +SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session +SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session +SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off svdhEEnable a per user session +SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored -SessionHeader headersvdhEImport session updates from a given HTTP response header -SessionInclude pathsvdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session -SetEnv env-variable valuesvdhBÈ¯°æº¯¼ö¸¦ ¼³Á¤ÇÑ´Ù -SetEnvIf attribute +SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored +SessionHeader headersvdhEImport session updates from a given HTTP response header +SessionInclude pathsvdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session +SetEnv env-variable valuesvdhBÈ¯°æº¯¼ö¸¦ ¼³Á¤ÇÑ´Ù +SetEnvIf attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhB¿äÃ»ÀÇ ¼ºÁú¿¡ µû¶ó È¯°æº¯¼ö¸¦ ¼³Á¤ÇÑ´Ù -svdhBSets environment variables based on an ap_expr expression -SetEnvIfNoCase attribute regex + [[!]env-variable[=value]] ...svdhB¿äÃ»ÀÇ ¼ºÁú¿¡ µû¶ó È¯°æº¯¼ö¸¦ ¼³Á¤ÇÑ´Ù +svdhBSets environment variables based on an ap_expr expression +SetEnvIfNoCase attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhB´ë¼Ò¹®ÀÚ¸¦ ±¸º°ÇÏÁö¾Ê°í ¿äÃ»ÀÇ ¼ºÁú¿¡ µû¶ó È¯°æº¯¼ö¸¦ + [[!]env-variable[=value]] ...svdhB´ë¼Ò¹®ÀÚ¸¦ ±¸º°ÇÏÁö¾Ê°í ¿äÃ»ÀÇ ¼ºÁú¿¡ µû¶ó È¯°æº¯¼ö¸¦ ¼³Á¤ÇÑ´Ù -SetHandler handler-name|NonesvdhCForces all matching files to be processed by a +SetHandler handler-name|NonesvdhCForces all matching files to be processed by a handler -SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST +SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST input -SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the +SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the server -SSIEndTag tag "-->" svBString that ends an include element -SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI +SSIEndTag tag "-->" svBString that ends an include element +SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI error -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.tr.utf8 b/docs/manual/mod/quickreference.html.tr.utf8 index 0284baf7261..eab2f467145 100644 --- a/docs/manual/mod/quickreference.html.tr.utf8 +++ b/docs/manual/mod/quickreference.html.tr.utf8 @@ -465,625 +465,634 @@ found GracefulShutdownTimeout saniye 0 sMSunucunun nazikÃ§e kapatÄ±lmasÄ±nÄ±n ardÄ±ndan ana sÃ¼reÃ§ Ã§Ä±kana kadar geÃ§ecek sÃ¼re iÃ§in bir zaman aÅÄ±mÄ± belirler. Group unix-grubu #-1 sTÄ°steklere yanÄ±t verecek sunucunun ait olacaÄÄ± grubu belirler. -H2Direct on|off on (for non TLS) skEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) skEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) skEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 skEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 skEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off skESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off skESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 skENumber of Extra File Handles +H2SessionExtraFiles n 5 skENumber of Extra File Handles +H2SessionExtraFiles n 5 skENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 skEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 skEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 skESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 skESize of Stream Window for upstream data. +H2WindowSize bytes 65536 skESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -skdhEConfigure HTTP response headers -HeaderName dosya-ismiskdhTDizin listesinin tepesine yerleÅtirilecek dosyanÄ±n ismini +skdhEConfigure HTTP response headers +HeaderName dosya-ismiskdhTDizin listesinin tepesine yerleÅtirilecek dosyanÄ±n ismini belirler. -HeartbeatAddress addr:portsDMulticast address for heartbeat packets -HeartbeatListenaddr:portsDmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sDSpecifies the maximum number of servers that will be sending +HeartbeatAddress addr:portsDMulticast address for heartbeat packets +HeartbeatListenaddr:portsDmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sDSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sDPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sDPath to read heartbeat data -HostnameLookups On|Off|Double Off skdÃÄ°stemci IP adresleri Ã¼zerinde DNS sorgularÄ±nÄ± etkin kÄ±lar. +HeartbeatStorage file-path logs/hb.dat sDPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sDPath to read heartbeat data +HostnameLookups On|Off|Double Off skdÃÄ°stemci IP adresleri Ã¼zerinde DNS sorgularÄ±nÄ± etkin kÄ±lar. -IdentityCheck On|Off Off skdEEnables logging of the RFC 1413 identity of the remote +IdentityCheck On|Off Off skdEEnables logging of the RFC 1413 identity of the remote user -IdentityCheckTimeout seconds 30 skdEDetermines the timeout duration for ident requests -<If ifade> ... </If>skdhÃÃalÄ±Åma anÄ±nda bir koÅul bir istek tarafÄ±ndan yerine getirildiÄi +IdentityCheckTimeout seconds 30 skdEDetermines the timeout duration for ident requests +<If ifade> ... </If>skdhÃÃalÄ±Åma anÄ±nda bir koÅul bir istek tarafÄ±ndan yerine getirildiÄi takdirde uygulanacak yÃ¶nergeleri barÄ±ndÄ±rÄ±r. -<IfDefine [!]parametre-adÄ±> ... - </IfDefine>skdhÃBaÅlatma sÄ±rasÄ±nda bir doÄruluk sÄ±namasÄ±ndan sonra iÅleme +<IfDefine [!]parametre-adÄ±> ... + </IfDefine>skdhÃBaÅlatma sÄ±rasÄ±nda bir doÄruluk sÄ±namasÄ±ndan sonra iÅleme sokulacak yÃ¶nergeleri sarmalar. -<IfModule [!]modÃ¼l-dosyasÄ±|modÃ¼l-betimleyici> ... - </IfModule>skdhÃBelli bir modÃ¼lÃ¼n varlÄ±ÄÄ±na veya yokluÄuna gÃ¶re iÅleme sokulacak +<IfModule [!]modÃ¼l-dosyasÄ±|modÃ¼l-betimleyici> ... + </IfModule>skdhÃBelli bir modÃ¼lÃ¼n varlÄ±ÄÄ±na veya yokluÄuna gÃ¶re iÅleme sokulacak yÃ¶nergeleri sarmalar. -<IfVersion [[!]operator] version> ... -</IfVersion>skdhEcontains version dependent configuration -ImapBase map|referer|URL http://servername/ skdhTDefault base for imagemap files -ImapDefault error|nocontent|map|referer|URL nocontent skdhTDefault action when an imagemap is called with coordinates +<IfVersion [[!]operator] version> ... +</IfVersion>skdhEcontains version dependent configuration +ImapBase map|referer|URL http://servername/ skdhTDefault base for imagemap files +ImapDefault error|nocontent|map|referer|URL nocontent skdhTDefault action when an imagemap is called with coordinates that are not explicitly mapped -ImapMenu none|formatted|semiformatted|unformatted formatted skdhTAction if no coordinates are given when calling +ImapMenu none|formatted|semiformatted|unformatted formatted skdhTAction if no coordinates are given when calling an imagemap -Include dosya-yolu|dizin-yolu|jokerskdÃSunucu yapÄ±landÄ±rma dosyalarÄ±nÄ±n baÅka dosyalarÄ± iÃ§ermesini saÄlar. +Include dosya-yolu|dizin-yolu|jokerskdÃSunucu yapÄ±landÄ±rma dosyalarÄ±nÄ±n baÅka dosyalarÄ± iÃ§ermesini saÄlar. -IncludeOptional dosya-yolu|dizin-yolu|jokerskdÃDiÄer yapÄ±landÄ±rma dosyalarÄ±nÄ±n sunucu yapÄ±landÄ±rma dosyasÄ±na dahil edilmesini saÄlar -IndexHeadInsert "imlenim ..."skdhTBir dizin sayfasÄ±nÄ±n HEAD bÃ¶lÃ¼mÃ¼ne metin yerleÅtirir. -IndexIgnore dosya [dosya] ... "." skdhTDizin iÃ§erik listesinden gizlenecek dosyalarÄ±n listesi belirtilir. +IncludeOptional dosya-yolu|dizin-yolu|jokerskdÃDiÄer yapÄ±landÄ±rma dosyalarÄ±nÄ±n sunucu yapÄ±landÄ±rma dosyasÄ±na dahil edilmesini saÄlar +IndexHeadInsert "imlenim ..."skdhTBir dizin sayfasÄ±nÄ±n HEAD bÃ¶lÃ¼mÃ¼ne metin yerleÅtirir. +IndexIgnore dosya [dosya] ... "." skdhTDizin iÃ§erik listesinden gizlenecek dosyalarÄ±n listesi belirtilir. -IndexIgnoreReset ON|OFFskdhTBir dizini listelerken gizlenecek dosyalar listesini boÅaltÄ±r +IndexIgnoreReset ON|OFFskdhTBir dizini listelerken gizlenecek dosyalar listesini boÅaltÄ±r -IndexOptions [+|-]seÃ§enek [[+|-]seÃ§enek] -...skdhTDizin iÃ§erik listesini yapÄ±landÄ±racak seÃ§enekler belirtilir. +IndexOptions [+|-]seÃ§enek [[+|-]seÃ§enek] +...skdhTDizin iÃ§erik listesini yapÄ±landÄ±racak seÃ§enekler belirtilir. -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name skdhTDizin iÃ§erik listesinin Ã¶ntanÄ±mlÄ± sÄ±ralamasÄ±nÄ± belirler. +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name skdhTDizin iÃ§erik listesinin Ã¶ntanÄ±mlÄ± sÄ±ralamasÄ±nÄ± belirler. -IndexStyleSheet url-yoluskdhTDizin listesine bir biÃ§embent ekler. -InputSed sed-commanddhDSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off skdhTRecord HSE_APPEND_LOG_PARAMETER requests from +IndexStyleSheet url-yoluskdhTDizin listesine bir biÃ§embent ekler. +InputSed sed-commanddhDSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off skdhTRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the error log -ISAPIAppendLogToQuery on|off on skdhTRecord HSE_APPEND_LOG_PARAMETER requests from +ISAPIAppendLogToQuery on|off on skdhTRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the query field -ISAPICacheFile file-path [file-path] -...skTISAPI .dll files to be loaded at startup -ISAPIFakeAsync on|off off skdhTFake asynchronous support for ISAPI callbacks -ISAPILogNotSupported on|off off skdhTLog unsupported feature requests from ISAPI +ISAPICacheFile file-path [file-path] +...skTISAPI .dll files to be loaded at startup +ISAPIFakeAsync on|off off skdhTFake asynchronous support for ISAPI callbacks +ISAPILogNotSupported on|off off skdhTLog unsupported feature requests from ISAPI extensions -ISAPIReadAheadBuffer size 49152 skdhTSize of the Read Ahead Buffer sent to ISAPI +ISAPIReadAheadBuffer size 49152 skdhTSize of the Read Ahead Buffer sent to ISAPI extensions -KeepAlive On|Off On skÃHTTP kalÄ±cÄ± baÄlantÄ±larÄ±nÄ± etkin kÄ±lar -KeepAliveTimeout sayÄ±[ms] 5 skÃBir kalÄ±cÄ± baÄlantÄ±da sunucunun bir sonraki isteÄi bekleme sÃ¼resi +KeepAlive On|Off On skÃHTTP kalÄ±cÄ± baÄlantÄ±larÄ±nÄ± etkin kÄ±lar +KeepAliveTimeout sayÄ±[ms] 5 skÃBir kalÄ±cÄ± baÄlantÄ±da sunucunun bir sonraki isteÄi bekleme sÃ¼resi -KeptBodySize azami_bayt_sayÄ±sÄ± 0 dTmod_include gibi sÃ¼zgeÃ§ler tarafÄ±ndan kullanÄ±lma olasÄ±lÄ±ÄÄ±na karÅÄ± +KeptBodySize azami_bayt_sayÄ±sÄ± 0 dTmod_include gibi sÃ¼zgeÃ§ler tarafÄ±ndan kullanÄ±lma olasÄ±lÄ±ÄÄ±na karÅÄ± istek gÃ¶vdesi iptal edilmek yerine belirtilen azami boyutta tutulur. -LanguagePriority MIME-lang [MIME-lang] -...skdhTThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...skdhTThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 skEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 skEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typeskESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit yÃ¶ntem [yÃ¶ntem] ... > ... - </Limit>dhÃEriÅimi sÄ±nÄ±rlanacak HTTP yÃ¶ntemleri iÃ§in eriÅim sÄ±nÄ±rlayÄ±cÄ±larÄ± +LDAPTrustedMode typeskESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit yÃ¶ntem [yÃ¶ntem] ... > ... + </Limit>dhÃEriÅimi sÄ±nÄ±rlanacak HTTP yÃ¶ntemleri iÃ§in eriÅim sÄ±nÄ±rlayÄ±cÄ±larÄ± sarmalar. -<LimitExcept yÃ¶ntem [yÃ¶ntem] ... > ... - </LimitExcept>dhÃÄ°simleri belirtilenler dÄ±ÅÄ±nda kalan HTTP yÃ¶ntemleri iÃ§in +<LimitExcept yÃ¶ntem [yÃ¶ntem] ... > ... + </LimitExcept>dhÃÄ°simleri belirtilenler dÄ±ÅÄ±nda kalan HTTP yÃ¶ntemleri iÃ§in kullanÄ±lacak eriÅim sÄ±nÄ±rlayÄ±cÄ±larÄ± sarmalar. -LimitInternalRecursion sayÄ± [sayÄ±] 10 skÃDahili yÃ¶nlendirmelerin ve istek iÃ§i isteklerin azami sayÄ±sÄ±nÄ± +LimitInternalRecursion sayÄ± [sayÄ±] 10 skÃDahili yÃ¶nlendirmelerin ve istek iÃ§i isteklerin azami sayÄ±sÄ±nÄ± belirler. -LimitRequestBody bayt-sayÄ±sÄ± 0 skdhÃÄ°stemci tarafÄ±ndan gÃ¶nderilen HTTP istek gÃ¶vdesinin toplam +LimitRequestBody bayt-sayÄ±sÄ± 0 skdhÃÄ°stemci tarafÄ±ndan gÃ¶nderilen HTTP istek gÃ¶vdesinin toplam uzunluÄunu sÄ±nÄ±rlar. -LimitRequestFields sayÄ± 100 skÃÄ°stemciden kabul edilecek HTTP isteÄi baÅlÄ±k alanlarÄ±nÄ±n sayÄ±sÄ±nÄ± +LimitRequestFields sayÄ± 100 skÃÄ°stemciden kabul edilecek HTTP isteÄi baÅlÄ±k alanlarÄ±nÄ±n sayÄ±sÄ±nÄ± sÄ±nÄ±rlar. -LimitRequestFieldSize bayt-sayÄ±sÄ± 8190 skÃÄ°stemciden kabul edilecek HTTP isteÄi baÅlÄ±k uzunluÄunu sÄ±nÄ±rlar. +LimitRequestFieldSize bayt-sayÄ±sÄ± 8190 skÃÄ°stemciden kabul edilecek HTTP isteÄi baÅlÄ±k uzunluÄunu sÄ±nÄ±rlar. -LimitRequestLine bayt-sayÄ±sÄ± 8190 skÃÄ°stemciden kabul edilecek HTTP istek satÄ±rÄ±nÄ±n uzunluÄunu sÄ±nÄ±rlar. +LimitRequestLine bayt-sayÄ±sÄ± 8190 skÃÄ°stemciden kabul edilecek HTTP istek satÄ±rÄ±nÄ±n uzunluÄunu sÄ±nÄ±rlar. -LimitXMLRequestBody bayt-sayÄ±sÄ± 1000000 skdhÃBir XML temelli istek gÃ¶vdesinin uzunluÄunu sÄ±nÄ±rlar. -Listen [IP-adresi:]port-numarasÄ± - [protokol]sMSunucunun dinleyeceÄi IP adresini ve portu belirler. -ListenBacklog kuyruk-uzunluÄusMBekleyen baÄlantÄ±lar kuyruÄunun azami uzunluÄunu +LimitXMLRequestBody bayt-sayÄ±sÄ± 1000000 skdhÃBir XML temelli istek gÃ¶vdesinin uzunluÄunu sÄ±nÄ±rlar. +Listen [IP-adresi:]port-numarasÄ± + [protokol]sMSunucunun dinleyeceÄi IP adresini ve portu belirler. +ListenBacklog kuyruk-uzunluÄusMBekleyen baÄlantÄ±lar kuyruÄunun azami uzunluÄunu belirler -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile dosya-ismi [dosya-ismi] ...skEBelirtilen nesne dosyasÄ±nÄ± veya kÃ¼tÃ¼phaneyi sunucu ile ilintiler. +LoadFile dosya-ismi [dosya-ismi] ...skEBelirtilen nesne dosyasÄ±nÄ± veya kÃ¼tÃ¼phaneyi sunucu ile ilintiler. -LoadModule modÃ¼l dosya-ismiskEBelirtilen nesne dosyasÄ±nÄ± veya kÃ¼tÃ¼phaneyi sunucu ile ilintiler +LoadModule modÃ¼l dosya-ismiskEBelirtilen nesne dosyasÄ±nÄ± veya kÃ¼tÃ¼phaneyi sunucu ile ilintiler ve etkin modÃ¼l listesine ekler. -<Location "URL-yolu|URL"> ... -</Location>skÃÄ°Ã§erdiÄi yÃ¶nergeler sadece eÅleÅen URLâlere uygulanÄ±r. +<Location "URL-yolu|URL"> ... +</Location>skÃÄ°Ã§erdiÄi yÃ¶nergeler sadece eÅleÅen URLâlere uygulanÄ±r. -<LocationMatch - dÃ¼zifade> ... </LocationMatch>skÃÄ°Ã§erdiÄi yÃ¶nergeler sadece dÃ¼zenli ifadelerle eÅleÅen URLâlere +<LocationMatch + dÃ¼zifade> ... </LocationMatch>skÃÄ°Ã§erdiÄi yÃ¶nergeler sadece dÃ¼zenli ifadelerle eÅleÅen URLâlere uygulanÄ±r. -LogFormat biÃ§em|takma-ad -[takma-ad] "%h %l %u %t \"%r\" +skTBir gÃ¼nlÃ¼k dosyasÄ±nda kullanÄ±lmak Ã¼zere girdi biÃ§emi tanÄ±mlar. +LogFormat biÃ§em|takma-ad +[takma-ad] "%h %l %u %t \"%r\" +skTBir gÃ¼nlÃ¼k dosyasÄ±nda kullanÄ±lmak Ã¼zere girdi biÃ§emi tanÄ±mlar. -LogIOTrackTTFB ON|OFF OFF skdhEEnable tracking of time to first byte (TTFB) -LogLevel [modÃ¼l:]seviye +LogIOTrackTTFB ON|OFF OFF skdhEEnable tracking of time to first byte (TTFB) +LogLevel [modÃ¼l:]seviye [modÃ¼l:seviye] ... - warn skdÃHata gÃ¼nlÃ¼klerinin ayrÄ±ntÄ± seviyesini belirler. -LogMessage message + warn skdÃHata gÃ¼nlÃ¼klerinin ayrÄ±ntÄ± seviyesini belirler. +LogMessage message [hook=hook] [expr=expression] -dDLog user-defined message to error log +dDLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesDPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesDPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat skdhDConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat skdhDConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]skdhDProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_nameskdhDProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_nameskdhDProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]skDProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first skdhDControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesDProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]skdhDMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesDProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soaskdhDAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luaskdhDAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_nameskDProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directoryskdhDSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once skdhDOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]skDProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_nameskdhDProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first skdhDControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesDProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]skdhDMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesDProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soaskdhDAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luaskdhDAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_nameskDProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directoryskdhDSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once skdhDOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>skdTDefine a configuration file macro -MaxConnectionsPerChild sayÄ± 0 sMTek bir Ã§ocuk sÃ¼recin Ã¶mrÃ¼ boyunca iÅleme sokabileceÄi istek +... </Macro>skdTDefine a configuration file macro +MaxConnectionsPerChild sayÄ± 0 sMTek bir Ã§ocuk sÃ¼recin Ã¶mrÃ¼ boyunca iÅleme sokabileceÄi istek sayÄ±sÄ±nÄ± sÄ±nÄ±rlamakta kullanÄ±lÄ±r. -MaxKeepAliveRequests sayÄ± 100 skÃBir kalÄ±cÄ± baÄlantÄ±da izin verilen istek sayÄ±sÄ± -MaxMemFree kB-sayÄ±sÄ± 2048 sMfree() Ã§aÄrÄ±lmaksÄ±zÄ±n ana bellek ayÄ±rÄ±cÄ±nÄ±n +MaxKeepAliveRequests sayÄ± 100 skÃBir kalÄ±cÄ± baÄlantÄ±da izin verilen istek sayÄ±sÄ± +MaxMemFree kB-sayÄ±sÄ± 2048 sMfree() Ã§aÄrÄ±lmaksÄ±zÄ±n ana bellek ayÄ±rÄ±cÄ±nÄ±n ayÄ±rmasÄ±na izin verilen azami bellek miktarÄ±nÄ± belirler. -MaxRangeOverlaps default | unlimited | none | - aralÄ±k-sayÄ±sÄ± 20 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen Ã¼st Ã¼ste binen +MaxRangeOverlaps default | unlimited | none | + aralÄ±k-sayÄ±sÄ± 20 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen Ã¼st Ã¼ste binen aralÄ±k sayÄ±sÄ± (100-200,150-300 gibi) -MaxRangeReversals default | unlimited | none | - aralÄ±k-sayÄ±sÄ± 20 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen ters sÄ±ralÄ± +MaxRangeReversals default | unlimited | none | + aralÄ±k-sayÄ±sÄ± 20 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen ters sÄ±ralÄ± aralÄ±k sayÄ±sÄ± (100-200,50-70 gibi) -MaxRanges default | unlimited | none | - aralÄ±k-sayÄ±sÄ± 200 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen aralÄ±k sayÄ±sÄ± -MaxRequestWorkers sayÄ±sMAynÄ± anda iÅleme sokulacak azami baÄlantÄ± sayÄ±sÄ± -MaxSpareServers sayÄ± 10 sMBoÅtaki Ã§ocuk sÃ¼reÃ§lerin azami sayÄ±sÄ± -MaxSpareThreads numbersMBoÅtaki azami evre sayÄ±sÄ±nÄ± belirler -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s skEKeepalive time for idle connections -MergeTrailers [on|off] off skÃTrailer alanlarÄ±nÄ±n baÅlÄ±Äa dahil edilip edilmeyeceÄini belirler -MetaDir directory .web skdhEName of the directory to find CERN-style meta information +MaxRanges default | unlimited | none | + aralÄ±k-sayÄ±sÄ± 200 skdÃÃzkaynaÄÄ±n tamamÄ±nÄ± dÃ¶ndÃ¼rmeden Ã¶nce izin verilen aralÄ±k sayÄ±sÄ± +MaxRequestWorkers sayÄ±sMAynÄ± anda iÅleme sokulacak azami baÄlantÄ± sayÄ±sÄ± +MaxSpareServers sayÄ± 10 sMBoÅtaki Ã§ocuk sÃ¼reÃ§lerin azami sayÄ±sÄ± +MaxSpareThreads numbersMBoÅtaki azami evre sayÄ±sÄ±nÄ± belirler +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s skEKeepalive time for idle connections +MergeTrailers [on|off] off skÃTrailer alanlarÄ±nÄ±n baÅlÄ±Äa dahil edilip edilmeyeceÄini belirler +MetaDir directory .web skdhEName of the directory to find CERN-style meta information files -MetaFiles on|off off skdhEActivates CERN meta-file processing -MetaSuffix suffix .meta skdhEFile name suffix for the file containing CERN-style +MetaFiles on|off off skdhEActivates CERN meta-file processing +MetaSuffix suffix .meta skdhEFile name suffix for the file containing CERN-style meta information -MimeMagicFile file-pathskEEnable MIME-type determination based on file contents +MimeMagicFile file-pathskEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers sayÄ± 5 sMBoÅtaki Ã§ocuk sÃ¼reÃ§lerin asgari sayÄ±sÄ± -MinSpareThreads sayÄ±sMÄ°steklerin ani artÄ±ÅÄ±nda devreye girecek boÅtaki evrelerin asgari +MinSpareServers sayÄ± 5 sMBoÅtaki Ã§ocuk sÃ¼reÃ§lerin asgari sayÄ±sÄ± +MinSpareThreads sayÄ±sMÄ°steklerin ani artÄ±ÅÄ±nda devreye girecek boÅtaki evrelerin asgari sayÄ±sÄ±nÄ± belirler. -MMapFile file-path [file-path] ...sDMap a list of files into memory at startup time -ModemStandard V.21|V.26bis|V.32|V.92dDModem standard to simulate -ModMimeUsePathInfo On|Off Off dTTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sDMap a list of files into memory at startup time +ModemStandard V.21|V.26bis|V.32|V.92dDModem standard to simulate +ModMimeUsePathInfo On|Off Off dTTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly skdhTThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly skdhTThe types of files that will be included when searching for a matching file with MultiViews -Mutex mekanizma [default|muteks-ismi] ... [OmitPID] default sÃMuteks mekanizmasÄ±nÄ± ve kilit dosyasÄ± dizinini tÃ¼m muteksler veya belirtilenler iÃ§in yapÄ±landÄ±rÄ±r -NameVirtualHost adres[:port]sÃÃNERÄ°LMÄ°YOR: Ä°sme dayalÄ± sanal konaklar iÃ§in IP adresi belirtir -NoProxy host [host] ...skEHosts, domains, or networks that will be connected to +Mutex mekanizma [default|muteks-ismi] ... [OmitPID] default sÃMuteks mekanizmasÄ±nÄ± ve kilit dosyasÄ± dizinini tÃ¼m muteksler veya belirtilenler iÃ§in yapÄ±landÄ±rÄ±r +NameVirtualHost adres[:port]sÃÃNERÄ°LMÄ°YOR: Ä°sme dayalÄ± sanal konaklar iÃ§in IP adresi belirtir +NoProxy host [host] ...skEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sTList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersTAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]seÃ§enek [[+|-]seÃ§enek] ... FollowSymlinks skdhÃBelli bir dizinde geÃ§erli olacak Ã¶zellikleri yapÄ±landÄ±rÄ±r. +NWSSLTrustedCerts filename [filename] ...sTList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersTAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]seÃ§enek [[+|-]seÃ§enek] ... FollowSymlinks skdhÃBelli bir dizinde geÃ§erli olacak Ã¶zellikleri yapÄ±landÄ±rÄ±r. - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhDSed command for filtering response content -PassEnv ortam-deÄiÅkeni [ortam-deÄiÅkeni] -...skdhTOrtam deÄiÅkenlerini kabuktan aktarÄ±r. -PidFile dosya logs/httpd.pid sMAna sÃ¼recin sÃ¼reÃ§ kimliÄinin (PID) kaydedileceÄi dosyayÄ± belirler. -PrivilegesMode FAST|SECURE|SELECTIVE FAST skdDTrade off processing speed and efficiency vs security against +OutputSed sed-commanddhDSed command for filtering response content +PassEnv ortam-deÄiÅkeni [ortam-deÄiÅkeni] +...skdhTOrtam deÄiÅkenlerini kabuktan aktarÄ±r. +PidFile dosya logs/httpd.pid sMAna sÃ¼recin sÃ¼reÃ§ kimliÄinin (PID) kaydedileceÄi dosyayÄ± belirler. +PrivilegesMode FAST|SECURE|SELECTIVE FAST skdDTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protokolskÃDinlenen bir soket iÃ§in protokol -ProtocolEcho On|Off Off skDTurn the echo server on or off -Protocols protocol ... http/1.1 skÃProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On skÃProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>skEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On skdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError skEDetermines how to handle bad header lines in a +Protocol protokolskÃDinlenen bir soket iÃ§in protokol +ProtocolEcho On|Off Off skDTurn the echo server on or off +Protocols protocol ... http/1.1 skÃProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On skÃProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>skEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On skdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError skEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...skEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...skEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainskEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off skdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>skEPathname to DBM file. -ProxyExpressDBMFile <type>skEDBM type of file. -ProxyExpressEnable [on|off]skEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 skdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]skdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]skdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytesskdTSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainskEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off skdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>skEPathname to DBM file. +ProxyExpressDBMFile <type>skEDBM type of file. +ProxyExpressEnable [on|off]skEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 skdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]skdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]skdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytesskdTSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *skdTSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]skdTSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off skdTTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]skdTSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off skdTDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *skdTSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]skdTSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off skdTTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]skdTSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off skdTDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]skdTFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off skdTEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]skdTFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off skdTEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]skdTSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off skdTTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]skdTSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off skdTTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off skdTDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]skdTDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 skEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>skEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off skdTDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]skdTDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 skEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>skEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 skEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 skEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]skdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On skEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off skdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]skdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]skdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]skdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On skEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off skdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]skdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]skdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]skdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]skdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]skdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]skdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off skdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off skdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 skENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 skENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serverskERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serverskERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serverskERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serverskERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off skEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On skdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off skEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On skdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off skdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off skdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addressskESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off skEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondsskENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off skEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addressskESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off skEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondsskENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off skEInformation provided in the Via HTTP response header for proxied requests -ReadmeName dosya-ismiskdhTDizin listesinin sonuna yerleÅtirilecek dosyanÄ±n ismini +ReadmeName dosya-ismiskdhTDizin listesinin sonuna yerleÅtirilecek dosyanÄ±n ismini belirler. -ReceiveBufferSize bayt-sayÄ±sÄ± 0 sMTCP alÄ±m tamponu boyu -Redirect [durum] [URL-yolu] -URLskdhTÄ°stemciyi, bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir URLâye +ReceiveBufferSize bayt-sayÄ±sÄ± 0 sMTCP alÄ±m tamponu boyu +Redirect [durum] [URL-yolu] +URLskdhTÄ°stemciyi, bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir URLâye yÃ¶nlendirir. -RedirectMatch [durum] dÃ¼zenli-ifade -URLskdhTGeÃ§erli URL ile eÅleÅen bir dÃ¼zenli ifadeye dayanarak bir harici +RedirectMatch [durum] dÃ¼zenli-ifade +URLskdhTGeÃ§erli URL ile eÅleÅen bir dÃ¼zenli ifadeye dayanarak bir harici yÃ¶nlendirme gÃ¶nderir. -RedirectPermanent URL-yolu URLskdhTÄ°stemciyi, kalÄ±cÄ± bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir +RedirectPermanent URL-yolu URLskdhTÄ°stemciyi, kalÄ±cÄ± bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir URLâye yÃ¶nlendirir. -RedirectTemp URL-yolu URLskdhTÄ°stemciyi, geÃ§ici bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir +RedirectTemp URL-yolu URLskdhTÄ°stemciyi, geÃ§ici bir yÃ¶nlendirme isteÄi dÃ¶ndÃ¼rerek farklÄ± bir URLâye yÃ¶nlendirir. -ReflectorHeader inputheader [outputheader]skdhTReflect an input header to the output headers -RemoteIPHeader header-fieldskTDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...skTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenameskTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNameskTDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...skTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenameskTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...kdhTRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]skdhTReflect an input header to the output headers +RemoteIPHeader header-fieldskTDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...skTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenameskTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNameskTDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...skTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenameskTDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...kdhTRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...kdhTRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...kdhTRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...kdhTRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...kdhTRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...kdhTRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...kdhTRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...kdhTRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...kdhTRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...kdhTRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...kdhTRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...kdhTRemoves any content type associations for a set of file +RemoveType extension [extension] +...kdhTRemoves any content type associations for a set of file extensions -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -skdhEConfigure HTTP request headers -RequestReadTimeout +skdhEConfigure HTTP request headers +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -skESet timeout values for receiving request headers and body from client. +skESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhTTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhTTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhTEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhTEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhTEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhTEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhTEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhTEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternskdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternskdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off skdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -skEDefines a mapping function for key-lookup -RewriteOptions OptionsskdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]skdhEDefines rules for the rewriting engine -RLimitCPU saniye|max [saniye|max]skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±lan sÃ¼reÃ§lerin +RewriteEngine on|off off skdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +skEDefines a mapping function for key-lookup +RewriteOptions OptionsskdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]skdhEDefines rules for the rewriting engine +RLimitCPU saniye|max [saniye|max]skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±lan sÃ¼reÃ§lerin iÅlemci tÃ¼ketimine sÄ±nÄ±rlama getirir. -RLimitMEM bayt-sayÄ±sÄ±|max [bayt-sayÄ±sÄ±|max] -skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±lan sÃ¼reÃ§lerin +RLimitMEM bayt-sayÄ±sÄ±|max [bayt-sayÄ±sÄ±|max] +skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±lan sÃ¼reÃ§lerin bellek tÃ¼ketimine sÄ±nÄ±rlama getirir. -RLimitNPROC sayÄ±|max [sayÄ±|max]skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±labilecek sÃ¼reÃ§ +RLimitNPROC sayÄ±|max [sayÄ±|max]skdhÃApache httpd alt sÃ¼reÃ§leri tarafÄ±ndan Ã§alÄ±ÅtÄ±rÄ±labilecek sÃ¼reÃ§ sayÄ±sÄ±na sÄ±nÄ±rlama getirir. -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile dosya-yolu logs/apache_runtime +sMÃocuk sÃ¼reÃ§ler iÃ§in eÅgÃ¼dÃ¼m verisini saklamakta kullanÄ±lan +ScoreBoardFile dosya-yolu logs/apache_runtime +sMÃocuk sÃ¼reÃ§ler iÃ§in eÅgÃ¼dÃ¼m verisini saklamakta kullanÄ±lan dosyanÄ±n yerini belirler. -Script method cgi-scriptskdTActivates a CGI script for a particular request +Script method cgi-scriptskdTActivates a CGI script for a particular request method. -ScriptAlias [URL-yolu] -dosya-yolu|dizin-yoluskdTBir URLâyi dosya sistemindeki bir yere eÅler ve hedefi bir CGI betiÄi olarak Ã§alÄ±ÅtÄ±rÄ±r. -ScriptAliasMatch dÃ¼zenli-ifade -dosya-yolu|dizin-yoluskTBir URLâyi dosya sistemindeki bir yere dÃ¼zenli ifade kullanarak +ScriptAlias [URL-yolu] +dosya-yolu|dizin-yoluskdTBir URLâyi dosya sistemindeki bir yere eÅler ve hedefi bir CGI betiÄi olarak Ã§alÄ±ÅtÄ±rÄ±r. +ScriptAliasMatch dÃ¼zenli-ifade +dosya-yolu|dizin-yoluskTBir URLâyi dosya sistemindeki bir yere dÃ¼zenli ifade kullanarak eÅler ve hedefi bir CGI betiÄi olarak Ã§alÄ±ÅtÄ±rÄ±r. -ScriptInterpreterSource Registry|Registry-Strict|Script Script skdhÃCGI betikleri iÃ§in yorumlayÄ±cÄ± belirleme tekniÄi -ScriptLog file-pathskTLocation of the CGI script error logfile -ScriptLogBuffer bytes 1024 skTMaximum amount of PUT or POST requests that will be recorded +ScriptInterpreterSource Registry|Registry-Strict|Script Script skdhÃCGI betikleri iÃ§in yorumlayÄ±cÄ± belirleme tekniÄi +ScriptLog file-pathskTLocation of the CGI script error logfile +ScriptLogBuffer bytes 1024 skTMaximum amount of PUT or POST requests that will be recorded in the scriptlog -ScriptLogLength bytes 10385760 skTSize limit of the CGI script logfile -ScriptSock file-path cgisock sTThe filename prefix of the socket to use for communication with +ScriptLogLength bytes 10385760 skTSize limit of the CGI script logfile +ScriptSock file-path cgisock sTThe filename prefix of the socket to use for communication with the cgi daemon -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sTEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sÃÄ°steÄin 63 karakterden bÃ¼yÃ¼k olduÄu varsayÄ±mÄ±yla, mod_status'un +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sTEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sÃÄ°steÄin 63 karakterden bÃ¼yÃ¼k olduÄu varsayÄ±mÄ±yla, mod_status'un ilk 63 karakteri mi yoksa son 63 karakteri mi gÃ¶stereceÄini belirler. -SendBufferSize bayt-sayÄ±sÄ± 0 sMTCP tamponu boyu -ServerAdmin eposta-adresi|URLskÃSunucunun hata iletilerinde istemciye gÃ¶stereceÄi eposta adresi +SendBufferSize bayt-sayÄ±sÄ± 0 sMTCP tamponu boyu +ServerAdmin eposta-adresi|URLskÃSunucunun hata iletilerinde istemciye gÃ¶stereceÄi eposta adresi -ServerAlias konakadÄ± [konakadÄ±] ...kÃÄ°stekleri isme dayalÄ± sanal konaklarla eÅleÅtirilirken +ServerAlias konakadÄ± [konakadÄ±] ...kÃÄ°stekleri isme dayalÄ± sanal konaklarla eÅleÅtirilirken kullanÄ±lacak konak adlarÄ± iÃ§in baÅka isimler belirtebilmeyi saÄlar. -ServerLimit sayÄ±sMAyarlanabilir sÃ¼reÃ§ sayÄ±sÄ±nÄ±n Ã¼st sÄ±nÄ±rÄ±nÄ± belirler. -ServerName [Åema://]tam-nitelenmiÅ-alan-adÄ±[:port] -skÃSunucunun Ã¶zdeÅleÅeceÄi konak ismi ve port. -ServerPath URL-yolukÃUyumsuz bir tarayÄ±cÄ± tarafÄ±ndan eriÅilmesi iÃ§in bir isme dayalÄ± sanal konak iÃ§in meÅru URL yolu -ServerRoot dizin-yolu /usr/local/apache sÃSunucu yapÄ±landÄ±rmasÄ± iÃ§in kÃ¶k dizin -ServerSignature On|Off|EMail Off skdhÃSunucu tarafÄ±ndan Ã¼retilen belgelerin dipnotunu ayarlar. +ServerLimit sayÄ±sMAyarlanabilir sÃ¼reÃ§ sayÄ±sÄ±nÄ±n Ã¼st sÄ±nÄ±rÄ±nÄ± belirler. +ServerName [Åema://]tam-nitelenmiÅ-alan-adÄ±[:port] +skÃSunucunun Ã¶zdeÅleÅeceÄi konak ismi ve port. +ServerPath URL-yolukÃUyumsuz bir tarayÄ±cÄ± tarafÄ±ndan eriÅilmesi iÃ§in bir isme dayalÄ± sanal konak iÃ§in meÅru URL yolu +ServerRoot dizin-yolu /usr/local/apache sÃSunucu yapÄ±landÄ±rmasÄ± iÃ§in kÃ¶k dizin +ServerSignature On|Off|EMail Off skdhÃSunucu tarafÄ±ndan Ã¼retilen belgelerin dipnotunu ayarlar. -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sÃServer HTTP yanÄ±t baÅlÄ±ÄÄ±nÄ± yapÄ±landÄ±rÄ±r. +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sÃServer HTTP yanÄ±t baÅlÄ±ÄÄ±nÄ± yapÄ±landÄ±rÄ±r. -Session On|Off Off skdhEEnables a session for the current directory or location -SessionCookieName name attributesskdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributesskdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off skdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher nameskdhDThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sDThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] skdhDThe key used to encrypt the session -SessionCryptoPassphraseFile filenameskdDFile containing keys used to encrypt the session -SessionDBDCookieName name attributesskdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributesskdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On skdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession skdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession skdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off skdhEEnable a per user session -SessionDBDSelectLabel label selectsession skdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession skdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off skdhEControl whether the contents of the session are written to the +Session On|Off Off skdhEEnables a session for the current directory or location +SessionCookieName name attributesskdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributesskdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off skdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher nameskdhDThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sDThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] skdhDThe key used to encrypt the session +SessionCryptoPassphraseFile filenameskdDFile containing keys used to encrypt the session +SessionDBDCookieName name attributesskdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributesskdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On skdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession skdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession skdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off skdhEEnable a per user session +SessionDBDSelectLabel label selectsession skdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession skdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off skdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathskdhEDefine URL prefixes for which a session is ignored -SessionHeader headerskdhEImport session updates from a given HTTP response header -SessionInclude pathskdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 skdhEDefine a maximum age in seconds for a session -SetEnv ortam-deÄiÅkeni [deÄer]skdhTOrtam deÄiÅkenlerini tanÄ±mlar. -SetEnvIf Ã¶znitelik +SessionExclude pathskdhEDefine URL prefixes for which a session is ignored +SessionHeader headerskdhEImport session updates from a given HTTP response header +SessionInclude pathskdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 skdhEDefine a maximum age in seconds for a session +SetEnv ortam-deÄiÅkeni [deÄer]skdhTOrtam deÄiÅkenlerini tanÄ±mlar. +SetEnvIf Ã¶znitelik dÃ¼zifd [!]ort-deÄiÅkeni[=deÄer] - [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTOrtam deÄiÅkenlerini isteÄin Ã¶zniteliklerine gÃ¶re atar. + [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTOrtam deÄiÅkenlerini isteÄin Ã¶zniteliklerine gÃ¶re atar. -SetEnvIfExpr ifade +SetEnvIfExpr ifade [!]ort-deÄiÅkeni[=deÄer] - [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTBir ap_expr ifadesine dayanarak ortam deÄiÅkenlerine deÄer atar -SetEnvIfNoCase Ã¶znitelik + [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTBir ap_expr ifadesine dayanarak ortam deÄiÅkenlerine deÄer atar +SetEnvIfNoCase Ã¶znitelik dÃ¼zifd [!]ort-deÄiÅkeni[=deÄer] - [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTOrtam deÄiÅkenlerini isteÄin Ã¶zniteliklerinde harf bÃ¼yÃ¼klÃ¼ÄÃ¼ne + [[!]ort-deÄiÅkeni[=deÄer]] ...skdhTOrtam deÄiÅkenlerini isteÄin Ã¶zniteliklerinde harf bÃ¼yÃ¼klÃ¼ÄÃ¼ne baÄlÄ± olmaksÄ±zÄ±n yapÄ±lmÄ±Å tanÄ±mlara gÃ¶re atar. -SetHandler eylemci-ismi|NoneskdhÃEÅleÅen tÃ¼m dosyalarÄ±n belli bir eylemci tarafÄ±ndan iÅlenmesine +SetHandler eylemci-ismi|NoneskdhÃEÅleÅen tÃ¼m dosyalarÄ±n belli bir eylemci tarafÄ±ndan iÅlenmesine sebep olur. -SetInputFilter sÃ¼zgeÃ§[;sÃ¼zgeÃ§...]skdhÃPOST girdilerini ve istemci isteklerini iÅleyecek sÃ¼zgeÃ§leri +SetInputFilter sÃ¼zgeÃ§[;sÃ¼zgeÃ§...]skdhÃPOST girdilerini ve istemci isteklerini iÅleyecek sÃ¼zgeÃ§leri belirler. -SetOutputFilter sÃ¼zgeÃ§[;sÃ¼zgeÃ§...]skdhÃSunucunun yanÄ±tlarÄ±nÄ± iÅleyecek sÃ¼zgeÃ§leri belirler. -SSIEndTag tag "-->" skTString that ends an include element -SSIErrorMsg message "[an error occurred +skdhTError message displayed when there is an SSI +SetOutputFilter sÃ¼zgeÃ§[;sÃ¼zgeÃ§...]skdhÃSunucunun yanÄ±tlarÄ±nÄ± iÅleyecek sÃ¼zgeÃ§leri belirler. +SSIEndTag tag "-->" skTString that ends an include element +SSIErrorMsg message "[an error occurred +skdhTError message displayed when there is an SSI error -SSIETag on|off off dhTControls whether ETags are generated by the server. -SSILastModified on|off off dhTControls whether Last-Modified headers are generated by the +SSIETag on|off off dhTControls whether ETags are generated by the server. +SSILastModified on|off off dhTControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhTEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/mod/quickreference.html.zh-cn.utf8 b/docs/manual/mod/quickreference.html.zh-cn.utf8 index 4f54a294171..355c7f31395 100644 --- a/docs/manual/mod/quickreference.html.zh-cn.utf8 +++ b/docs/manual/mod/quickreference.html.zh-cn.utf8 @@ -462,620 +462,629 @@ media type in the HTTP Content-Type header field will exit. Group unix-group #-1 sBGroup under which the server will answer requests -H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2Direct on|off on (for non TLS) svEH2 Direct Protocol Switch +H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. H2MaxSessionStreams n 100 svEMaximum number of active streams per HTTP/2 session. -H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkerIdleSeconds n 600 sEMaximum number of seconds h2 workers remain idle until shut down. +H2MaxWorkers nsEMaximum number of worker threads to use per child process. H2MaxWorkers nsEMaximum number of worker threads to use per child process. -H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2MinWorkers nsEMinimal number of worker threads to use per child process. +H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch H2SerializeHeaders on|off off svESerialize Request/Resoonse Processing Switch -H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2SessionExtraFiles n 5 svENumber of Extra File Handles +H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. H2StreamMaxMemSize bytes 65536 svEMaximum amount of output data buffered per stream. -H2WindowSize bytes 65536 svESize of Stream Window for upstream data. -Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +H2WindowSize bytes 65536 svESize of Stream Window for upstream data. +Header [condition] add|append|echo|edit|edit*|merge|set|setifempty|unset|note header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP response headers -HeaderName filenamesvdhBName of the file that will be inserted at the top +svdhEConfigure HTTP response headers +HeaderName filenamesvdhBName of the file that will be inserted at the top of the index listing -HeartbeatAddress addr:portsXMulticast address for heartbeat packets -HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests -HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending +HeartbeatAddress addr:portsXMulticast address for heartbeat packets +HeartbeatListenaddr:portsXmulticast address to listen for incoming heartbeat requests +HeartbeatMaxServers number-of-servers 10 sXSpecifies the maximum number of servers that will be sending heartbeat requests to this server -HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data -HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data -HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses -IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote +HeartbeatStorage file-path logs/hb.dat sXPath to store heartbeat data +HeartbeatStorage file-path logs/hb.dat sXPath to read heartbeat data +HostnameLookups On|Off|Double Off svdCEnables DNS lookups on client IP addresses +IdentityCheck On|Off Off svdEEnables logging of the RFC 1413 identity of the remote user -IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests -<If expression> ... </If>svdhCContains directives that apply only if a condition is +IdentityCheckTimeout seconds 30 svdEDetermines the timeout duration for ident requests +<If expression> ... </If>svdhCContains directives that apply only if a condition is satisfied by a request at runtime -<IfDefine [!]parameter-name> ... - </IfDefine>svdhCEncloses directives that will be processed only +<IfDefine [!]parameter-name> ... + </IfDefine>svdhCEncloses directives that will be processed only if a test is true at startup -<IfModule [!]module-file|module-identifier> ... - </IfModule>svdhCEncloses directives that are processed conditional on the +<IfModule [!]module-file|module-identifier> ... + </IfModule>svdhCEncloses directives that are processed conditional on the presence or absence of a specific module -<IfVersion [[!]operator] version> ... -</IfVersion>svdhEcontains version dependent configuration -ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files -ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates +<IfVersion [[!]operator] version> ... +</IfVersion>svdhEcontains version dependent configuration +ImapBase map|referer|URL http://servername/ svdhBDefault base for imagemap files +ImapDefault error|nocontent|map|referer|URL nocontent svdhBDefault action when an imagemap is called with coordinates that are not explicitly mapped -ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling +ImapMenu none|formatted|semiformatted|unformatted formatted svdhBAction if no coordinates are given when calling an imagemap -Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within +Include file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within +IncludeOptional file-path|directory-path|wildcardsvdCIncludes other configuration files from within the server configuration files -IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. -IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing +IndexHeadInsert "markup ..."svdhBInserts text in the HEAD section of an index page. +IndexIgnore file [file] ... "." svdhBAdds to the list of files to hide when listing a directory -IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing +IndexIgnoreReset ON|OFFsvdhBEmpties the list of files to hide when listing a directory -IndexOptions [+|-]option [[+|-]option] -...svdhBVarious configuration settings for directory +IndexOptions [+|-]option [[+|-]option] +...svdhBVarious configuration settings for directory indexing -IndexOrderDefault Ascending|Descending -Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index -IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index -InputSed sed-commanddhXSed command to filter request data (typically POST data) -ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +IndexOrderDefault Ascending|Descending +Name|Date|Size|Description Ascending Name svdhBSets the default ordering of the directory index +IndexStyleSheet url-pathsvdhBAdds a CSS stylesheet to the directory index +InputSed sed-commanddhXSed command to filter request data (typically POST data) +ISAPIAppendLogToErrors on|off off svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the error log -ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from +ISAPIAppendLogToQuery on|off on svdhBRecord HSE_APPEND_LOG_PARAMETER requests from ISAPI extensions to the query field -ISAPICacheFile file-path [file-path] -...svBISAPI .dll files to be loaded at startup -ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks -ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI +ISAPICacheFile file-path [file-path] +...svBISAPI .dll files to be loaded at startup +ISAPIFakeAsync on|off off svdhBFake asynchronous support for ISAPI callbacks +ISAPILogNotSupported on|off off svdhBLog unsupported feature requests from ISAPI extensions -ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI +ISAPIReadAheadBuffer size 49152 svdhBSize of the Read Ahead Buffer sent to ISAPI extensions -KeepAlive On|Off On svCEnables HTTP persistent connections -KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent +KeepAlive On|Off On svCEnables HTTP persistent connections +KeepAliveTimeout num[ms] 5 svCAmount of time the server will wait for subsequent requests on a persistent connection -KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to +KeptBodySize maximum size in bytes 0 dBKeep the request body instead of discarding it up to the specified maximum size, for potential use by filters such as mod_include. -LanguagePriority MIME-lang [MIME-lang] -...svdhBThe precendence of language variants for cases where +LanguagePriority MIME-lang [MIME-lang] +...svdhBThe precendence of language variants for cases where the client does not express a preference -LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache -LDAPCacheTTL seconds 600 sETime that cached items remain valid -LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long -LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds -LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK -LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare +LDAPCacheEntries number 1024 sEMaximum number of entries in the primary LDAP cache +LDAPCacheTTL seconds 600 sETime that cached items remain valid +LDAPConnectionPoolTTL n -1 svEDiscard backend connections that have been sitting in the connection pool too long +LDAPConnectionTimeout secondssESpecifies the socket connection timeout in seconds +LDAPLibraryDebug 7sEEnable debugging in the LDAP SDK +LDAPOpCacheEntries number 1024 sENumber of entries used to cache LDAP compare operations -LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain +LDAPOpCacheTTL seconds 600 sETime that entries in the operation cache remain valid -LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. -LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. -LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. -LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. -LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file -LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache -LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds -LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per +LDAPReferralHopLimit numberdhEThe maximum number of referral hops to chase before terminating an LDAP query. +LDAPReferrals On|Off|default On dhEEnable referral chasing during queries to the LDAP server. +LDAPRetries number-of-retries 3 sEConfigures the number of LDAP server retries. +LDAPRetryDelay seconds 0 sEConfigures the delay between LDAP server retries. +LDAPSharedCacheFile directory-path/filenamesESets the shared memory cache file +LDAPSharedCacheSize bytes 500000 sESize in bytes of the shared-memory cache +LDAPTimeout seconds 60 sESpecifies the timeout for LDAP search and bind operations, in seconds +LDAPTrustedClientCert type directory-path/filename/nickname [password]dhESets the file containing or nickname referring to a per connection client certificate. Not all LDAP toolkits support per connection client certificates. -LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted +LDAPTrustedGlobalCert type directory-path/filename [password]sESets the file or database containing global trusted Certificate Authority or global client certificates -LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. -LDAPVerifyServerCert On|Off On sEForce server certificate verification -<Limit method [method] ... > ... - </Limit>dhCRestrict enclosed access controls to only certain HTTP +LDAPTrustedMode typesvESpecifies the SSL/TLS mode to be used when connecting to an LDAP server. +LDAPVerifyServerCert On|Off On sEForce server certificate verification +<Limit method [method] ... > ... + </Limit>dhCRestrict enclosed access controls to only certain HTTP methods -<LimitExcept method [method] ... > ... - </LimitExcept>dhCRestrict access controls to all HTTP methods +<LimitExcept method [method] ... > ... + </LimitExcept>dhCRestrict access controls to all HTTP methods except the named ones -LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested +LimitInternalRecursion number [number] 10 svCDetermine maximum number of internal redirects and nested subrequests -LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent +LimitRequestBody bytes 0 svdhCRestricts the total size of the HTTP request body sent from the client -LimitRequestFields number 100 svCLimits the number of HTTP request header fields that +LimitRequestFields number 100 svCLimits the number of HTTP request header fields that will be accepted from the client -LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the +LimitRequestFieldSize bytes 8190 svCLimits the size of the HTTP request header allowed from the client -LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted +LimitRequestLine bytes 8190 svCLimit the size of the HTTP request line that will be accepted from the client -LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body -Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server +LimitXMLRequestBody bytes 1000000 svdhCLimits the size of an XML-based request body +Listen [IP-address:]portnumber [protocol]sMIP addresses and ports that the server listens to -ListenBacklog backlogsMMaximum length of the queue of pending connections -ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of +ListenBacklog backlogsMMaximum length of the queue of pending connections +ListenCoresBucketsRatio ratio 0 (disabled) sMRatio between the number of CPU cores (online) and the number of listeners' buckets -LoadFile filename [filename] ...svELink in the named object file or library -LoadModule module filenamesvELinks in the object file or library, and adds to the list +LoadFile filename [filename] ...svELink in the named object file or library +LoadModule module filenamesvELinks in the object file or library, and adds to the list of active modules -<Location - "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching +<Location + "URL-path|URL"> ... </Location>svCApplies the enclosed directives only to matching URLs -<LocationMatch - regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression +<LocationMatch + regex> ... </LocationMatch>svCApplies the enclosed directives only to regular-expression matching URLs -LogFormat format|nickname -[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file -LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) -LogLevel [module:]level +LogFormat format|nickname +[nickname] "%h %l %u %t \"%r\" +svBDescribes a format for use in a log file +LogIOTrackTTFB ON|OFF OFF svdhEEnable tracking of time to first byte (TTFB) +LogLevel [module:]level [module:level] ... - warn svdCControls the verbosity of the ErrorLog -LogMessage message + warn svdCControls the verbosity of the ErrorLog +LogMessage message [hook=hook] [expr=expression] -dXLog user-defined message to error log +dXLog user-defined message to error log -LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core +LuaAuthzProvider provider_name /path/to/lua/script.lua function_namesXPlug an authorization provider function into mod_authz_core -LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. -LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing -LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing -LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing -LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request +LuaCodeCache stat|forever|never stat svdhXConfigure the compiled code cache. +LuaHookAccessChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the access_checker phase of request processing +LuaHookAuthChecker /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the auth_checker phase of request processing +LuaHookCheckUserID /path/to/lua/script.lua hook_function_name [early|late]svdhXProvide a hook for the check_user_id phase of request processing +LuaHookFixups /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the fixups phase of a request processing -LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing -LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request +LuaHookInsertFilter /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the insert_filter phase of request processing +LuaHookLog /path/to/lua/script.lua log_function_namesvdhXProvide a hook for the access log phase of a request processing -LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing -LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing -LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing -LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children -LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering -LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler -LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering -LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath -LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path -LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing -LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives -LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once - +LuaHookMapToStorage /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the map_to_storage phase of request processing +LuaHookTranslateName /path/to/lua/script.lua hook_function_name [early|late]svXProvide a hook for the translate name phase of request processing +LuaHookTypeChecker /path/to/lua/script.lua hook_function_namesvdhXProvide a hook for the type_checker phase of request processing +LuaInherit none|parent-first|parent-last parent-first svdhXControls how parent configuration sections are merged into children +LuaInputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content input filtering +LuaMapHandler uri-pattern /path/to/lua/script.lua [function-name]svdhXMap a path to a lua handler +LuaOutputFilter filter_name /path/to/lua/script.lua function_namesXProvide a Lua function for content output filtering +LuaPackageCPath /path/to/include/?.soasvdhXAdd a directory to lua's package.cpath +LuaPackagePath /path/to/include/?.luasvdhXAdd a directory to lua's package.path +LuaQuickHandler /path/to/script.lua hook_function_namesvXProvide a hook for the quick handler of request processing +LuaRoot /path/to/a/directorysvdhXSpecify the base path for resolving relative paths for mod_lua directives +LuaScope once|request|conn|thread|server [min] [max] once svdhXOne of once, request, conn, thread -- default is once + <Macro name [par1 .. parN]> -... </Macro>svdBDefine a configuration file macro -MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server +... </Macro>svdBDefine a configuration file macro +MaxConnectionsPerChild number 0 sMLimit on the number of connections that an individual child server will handle during its life -MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent +MaxKeepAliveRequests number 100 svCNumber of requests allowed on a persistent connection -MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed +MaxMemFree KBytes 2048 sMMaximum amount of memory that the main allocator is allowed to hold without calling free() -MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete +MaxRangeOverlaps default | unlimited | none | number-of-ranges 20 svdCNumber of overlapping ranges (eg: 100-200,150-300) allowed before returning the complete resource -MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete +MaxRangeReversals default | unlimited | none | number-of-ranges 20 svdCNumber of range reversals (eg: 100-200,50-70) allowed before returning the complete resource -MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete +MaxRanges default | unlimited | none | number-of-ranges 200 svdCNumber of ranges allowed before returning the complete resource -MaxRequestWorkers numbersMMaximum number of connections that will be processed +MaxRequestWorkers numbersMMaximum number of connections that will be processed simultaneously -MaxSpareServers number 10 sMMaximum number of idle child server processes -MaxSpareThreads numbersMMaximum number of idle threads -MaxThreads number 2048 sMSet the maximum number of worker threads -MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections -MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers -MetaDir directory .web svdhEName of the directory to find CERN-style meta information +MaxSpareServers number 10 sMMaximum number of idle child server processes +MaxSpareThreads numbersMMaximum number of idle threads +MaxThreads number 2048 sMSet the maximum number of worker threads +MemcacheConnTTL num[units] 15s svEKeepalive time for idle connections +MergeTrailers [on|off] off svCDetermines whether trailers are merged into headers +MetaDir directory .web svdhEName of the directory to find CERN-style meta information files -MetaFiles on|off off svdhEActivates CERN meta-file processing -MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style +MetaFiles on|off off svdhEActivates CERN meta-file processing +MetaSuffix suffix .meta svdhEFile name suffix for the file containing CERN-style meta information -MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents +MimeMagicFile file-pathsvEEnable MIME-type determination based on file contents using the specified magic file -MinSpareServers number 5 sMMinimum number of idle child server processes -MinSpareThreads numbersMMinimum number of idle threads available to handle request +MinSpareServers number 5 sMMinimum number of idle child server processes +MinSpareThreads numbersMMinimum number of idle threads available to handle request spikes -MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time -ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate -ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info +MMapFile file-path [file-path] ...sXMap a list of files into memory at startup time +ModemStandard V.21|V.26bis|V.32|V.92dXModem standard to simulate +ModMimeUsePathInfo On|Off Off dBTells mod_mime to treat path_info components as part of the filename -MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers -[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for +MultiviewsMatch Any|NegotiatedOnly|Filters|Handlers +[Handlers|Filters] NegotiatedOnly svdhBThe types of files that will be included when searching for a matching file with MultiViews -Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all +Mutex mechanism [default|mutex-name] ... [OmitPID] default sCConfigures mutex mechanism and lock file directory for all or specified mutexes -NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual +NameVirtualHost addr[:port]sCDEPRECATED: Designates an IP address for name-virtual hosting -NoProxy host [host] ...svEHosts, domains, or networks that will be connected to +NoProxy host [host] ...svEHosts, domains, or networks that will be connected to directly -NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates -NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request -Options - [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular +NWSSLTrustedCerts filename [filename] ...sBList of additional client certificates +NWSSLUpgradeable [IP-address:]portnumbersBAllows a connection to be upgraded to an SSL connection upon request +Options + [+|-]option [[+|-]option] ... FollowSymlinks svdhCConfigures what features are available in a particular directory - Order ordering Deny,Allow dhEControls the default access state and the order in which + Order ordering Deny,Allow dhEControls the default access state and the order in which Allow and Deny are evaluated. -OutputSed sed-commanddhXSed command for filtering response content -PassEnv env-variable [env-variable] -...svdhBPasses environment variables from the shell -PidFile filename logs/httpd.pid sMFile where the server records the process ID +OutputSed sed-commanddhXSed command for filtering response content +PassEnv env-variable [env-variable] +...svdhBPasses environment variables from the shell +PidFile filename logs/httpd.pid sMFile where the server records the process ID of the daemon -PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against +PrivilegesMode FAST|SECURE|SELECTIVE FAST svdXTrade off processing speed and efficiency vs security against malicious privileges-aware code. -Protocol protocolsvCProtocol for a listening socket -ProtocolEcho On|Off Off svXTurn the echo server on or off -Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host -ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host -<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources -ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers -ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a +Protocol protocolsvCProtocol for a listening socket +ProtocolEcho On|Off Off svXTurn the echo server on or off +Protocols protocol ... http/1.1 svCProtocols available for a server/virtual host +ProtocolsHonorOrder On|Off On svCProtocols available for a server/virtual host +<Proxy wildcard-url> ...</Proxy>svEContainer for directives applied to proxied resources +ProxyAddHeaders Off|On On svdEAdd proxy information in X-Forwarded-* headers +ProxyBadHeader IsError|Ignore|StartBody IsError svEDetermines how to handle bad header lines in a response -ProxyBlock *|word|host|domain -[word|host|domain] ...svEWords, hosts, or domains that are banned from being +ProxyBlock *|word|host|domain +[word|host|domain] ...svEWords, hosts, or domains that are banned from being proxied -ProxyDomain DomainsvEDefault domain name for proxied requests -ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content -ProxyExpressDBMFile <pathname>svEPathname to DBM file. -ProxyExpressDBMFile <type>svEDBM type of file. -ProxyExpressEnable [on|off]svEEnable the module functionality. -ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings -ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server -ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing -ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and +ProxyDomain DomainsvEDefault domain name for proxied requests +ProxyErrorOverride On|Off Off svdEOverride error pages for proxied content +ProxyExpressDBMFile <pathname>svEPathname to DBM file. +ProxyExpressDBMFile <type>svEDBM type of file. +ProxyExpressEnable [on|off]svEEnable the module functionality. +ProxyFtpDirCharset character set ISO-8859-1 svdEDefine the character set for proxied FTP listings +ProxyFtpEscapeWildcards [on|off]svdEWhether wildcards in requested filenames are escaped when sent to the FTP server +ProxyFtpListOnWildcard [on|off]svdEWhether wildcards in requested filenames trigger a file listing +ProxyHTMLBufSize bytessvdBSets the buffer size increment for buffering inline scripts and stylesheets. -ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. -ProxyHTMLDocType HTML|XHTML [Legacy]
OR -
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. -ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. -ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. -ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, +ProxyHTMLCharsetOut Charset | *svdBSpecify a charset for mod_proxy_html output. +ProxyHTMLDocType HTML|XHTML [Legacy]
OR +
ProxyHTMLDocType fpi [SGML|XML]svdBSets an HTML or XHTML document type declaration. +ProxyHTMLEnable On|Off Off svdBTurns the proxy_html filter on or off. +ProxyHTMLEvents attribute [attribute ...]svdBSpecify attributes to treat as scripting events. +ProxyHTMLExtended On|Off Off svdBDetermines whether to fix links in inline scripts, stylesheets, and scripting events. -ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. -ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of +ProxyHTMLFixups [lowercase] [dospath] [reset]svdBFixes for simple HTML errors. +ProxyHTMLInterp On|Off Off svdBEnables per-request interpolation of ProxyHTMLURLMap rules. -ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. -ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML +ProxyHTMLLinks element attribute [attribute2 ...]svdBSpecify HTML elements that have URL attributes to be rewritten. +ProxyHTMLMeta On|Off Off svdBTurns on or off extra pre-parsing of metadata in HTML <head> sections. -ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. -ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links -ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer -<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched +ProxyHTMLStripComments On|Off Off svdBDetermines whether to strip HTML comments. +ProxyHTMLURLMap from-pattern to-pattern [flags] [cond]svdBDefines a rule to rewrite HTML links +ProxyIOBufferSize bytes 8192 svEDetermine size of internal data throughput buffer +<ProxyMatch regex> ...</ProxyMatch>svEContainer for directives applied to regular-expression-matched proxied resources -ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded +ProxyMaxForwards number -1 svEMaximium number of proxies that a request can be forwarded through -ProxyPass [path] !|url [key=value - [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space -ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server -ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations -ProxyPassMatch [regex] !|url [key=value - [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions -ProxyPassReverse [path] url -[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse +ProxyPass [path] !|url [key=value + [key=value ...]] [nocanon] [interpolate] [noquery]svdEMaps remote servers into the local server URL-space +ProxyPassInherit On|Off On svEInherit ProxyPass directives defined from the main server +ProxyPassInterpolateEnv On|Off Off svdEEnable Environment Variable interpolation in Reverse Proxy configurations +ProxyPassMatch [regex] !|url [key=value + [key=value ...]]svdEMaps remote servers into the local server URL-space using regular expressions +ProxyPassReverse [path] url +[interpolate]svdEAdjusts the URL in HTTP response headers sent from a reverse proxied server -ProxyPassReverseCookieDomain internal-domain -public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- +ProxyPassReverseCookieDomain internal-domain +public-domain [interpolate]svdEAdjusts the Domain string in Set-Cookie headers from a reverse- proxied server -ProxyPassReverseCookiePath internal-path -public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- +ProxyPassReverseCookiePath internal-path +public-path [interpolate]svdEAdjusts the Path string in Set-Cookie headers from a reverse- proxied server -ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy +ProxyPreserveHost On|Off Off svdEUse incoming Host HTTP request header for proxy request -ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP +ProxyReceiveBufferSize bytes 0 svENetwork buffer size for proxied HTTP and FTP connections -ProxyRemote match remote-serversvERemote proxy used to handle certain requests -ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular +ProxyRemote match remote-serversvERemote proxy used to handle certain requests +ProxyRemoteMatch regex remote-serversvERemote proxy used to handle requests matched by regular expressions -ProxyRequests On|Off Off svEEnables forward (standard) proxy requests -ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the +ProxyRequests On|Off Off svEEnables forward (standard) proxy requests +ProxySCGIInternalRedirect On|Off|Headername On svdEEnable or disable internal redirect responses from the backend -ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response +ProxySCGISendfile On|Off|Headername Off svdEEnable evaluation of X-Sendfile pseudo response header -ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters -ProxySourceAddress addresssvESet local IP address for outgoing proxy connections -ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status -ProxyTimeout secondssvENetwork timeout for proxied requests -ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response +ProxySet url key=value [key=value ...]dESet various Proxy balancer or member parameters +ProxySourceAddress addresssvESet local IP address for outgoing proxy connections +ProxyStatus Off|On|Full Off svEShow Proxy LoadBalancer status in mod_status +ProxyTimeout secondssvENetwork timeout for proxied requests +ProxyVia On|Off|Full|Block Off svEInformation provided in the Via HTTP response header for proxied requests -ReadmeName filenamesvdhBName of the file that will be inserted at the end +ReadmeName filenamesvdhBName of the file that will be inserted at the end of the index listing -ReceiveBufferSize bytes 0 sMTCP receive buffer size -Redirect [status] URL-path -URLsvdhBSends an external redirect asking the client to fetch +ReceiveBufferSize bytes 0 sMTCP receive buffer size +Redirect [status] URL-path +URLsvdhBSends an external redirect asking the client to fetch a different URL -RedirectMatch [status] regex -URLsvdhBSends an external redirect based on a regular expression match +RedirectMatch [status] regex +URLsvdhBSends an external redirect based on a regular expression match of the current URL -RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch +RedirectPermanent URL-path URLsvdhBSends an external permanent redirect asking the client to fetch a different URL -RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch +RedirectTemp URL-path URLsvdhBSends an external temporary redirect asking the client to fetch a different URL -ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers -RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses -RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses -RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value -RemoveCharset extension [extension] -...vdhBRemoves any character set associations for a set of file +ReflectorHeader inputheader [outputheader]svdhBReflect an input header to the output headers +RemoteIPHeader header-fieldsvBDeclare the header field which should be parsed for useragent IP addresses +RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPInternalProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPProxiesHeader HeaderFieldNamesvBDeclare the header field which will record all intermediate IP addresses +RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...svBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoteIPTrustedProxyList filenamesvBDeclare client intranet IP addresses trusted to present the RemoteIPHeader value +RemoveCharset extension [extension] +...vdhBRemoves any character set associations for a set of file extensions -RemoveEncoding extension [extension] -...vdhBRemoves any content encoding associations for a set of file +RemoveEncoding extension [extension] +...vdhBRemoves any content encoding associations for a set of file extensions -RemoveHandler extension [extension] -...vdhBRemoves any handler associations for a set of file +RemoveHandler extension [extension] +...vdhBRemoves any handler associations for a set of file extensions -RemoveInputFilter extension [extension] -...vdhBRemoves any input filter associations for a set of file +RemoveInputFilter extension [extension] +...vdhBRemoves any input filter associations for a set of file extensions -RemoveLanguage extension [extension] -...vdhBRemoves any language associations for a set of file +RemoveLanguage extension [extension] +...vdhBRemoves any language associations for a set of file extensions -RemoveOutputFilter extension [extension] -...vdhBRemoves any output filter associations for a set of file +RemoveOutputFilter extension [extension] +...vdhBRemoves any output filter associations for a set of file extensions -RemoveType extension [extension] -...vdhBRemoves any content type associations for a set of file +RemoveType extension [extension] +...vdhBRemoves any content type associations for a set of file extensions -RequestHeader add|append|edit|edit*|merge|set|setifempty|unset +RequestHeader add|append|edit|edit*|merge|set|setifempty|unset header [[expr=]value [replacement] [early|env=[!]varname|expr=expression]] -svdhEConfigure HTTP request headers -RequestReadTimeout +svdhEConfigure HTTP request headers +RequestReadTimeout [header=timeout[-maxtimeout][,MinRate=rate] [body=timeout[-maxtimeout][,MinRate=rate] -svESet timeout values for receiving request headers and body from client. +svESet timeout values for receiving request headers and body from client. -Require [not] entity-name - [entity-name] ...dhBTests whether an authenticated user is authorized by +Require [not] entity-name + [entity-name] ...dhBTests whether an authenticated user is authorized by an authorization provider. -<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none +<RequireAll> ... </RequireAll>dhBEnclose a group of authorization directives of which none must fail and at least one must succeed for the enclosing directive to succeed. -<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one +<RequireAny> ... </RequireAny>dhBEnclose a group of authorization directives of which one must succeed for the enclosing directive to succeed. -<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none +<RequireNone> ... </RequireNone>dhBEnclose a group of authorization directives of which none must succeed for the enclosing directive to not fail. -RewriteBase URL-pathdhESets the base URL for per-directory rewrites - RewriteCond - TestString CondPatternsvdhEDefines a condition under which rewriting will take place +RewriteBase URL-pathdhESets the base URL for per-directory rewrites + RewriteCond + TestString CondPatternsvdhEDefines a condition under which rewriting will take place -RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine -RewriteMap MapName MapType:MapSource -svEDefines a mapping function for key-lookup -RewriteOptions OptionssvdhESets some special options for the rewrite engine -RewriteRule - Pattern Substitution [flags]svdhEDefines rules for the rewriting engine -RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched +RewriteEngine on|off off svdhEEnables or disables runtime rewriting engine +RewriteMap MapName MapType:MapSource +svEDefines a mapping function for key-lookup +RewriteOptions OptionssvdhESets some special options for the rewrite engine +RewriteRule + Pattern Substitution [flags]svdhEDefines rules for the rewriting engine +RLimitCPU seconds|max [seconds|max]svdhCLimits the CPU consumption of processes launched by Apache httpd children -RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched +RLimitMEM bytes|max [bytes|max]svdhCLimits the memory consumption of processes launched by Apache httpd children -RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by +RLimitNPROC number|max [number|max]svdhCLimits the number of processes that can be launched by processes launched by Apache httpd children -Satisfy Any|All All dhEInteraction between host-level access control and +Satisfy Any|All All dhEInteraction between host-level access control and user authentication -ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for +ScoreBoardFile file-path logs/apache_runtime +sMLocation of the file used to store coordination data for the child processes -Script method cgi-scriptsvdBActivates a CGI script for a particular request +Script method cgi-scriptsvdBActivates a CGI script for a particular request method. -ScriptAlias URL-path -file-path|directory-pathsvBMaps a URL to a filesystem location and designates the +ScriptAlias URL-path +file-path|directory-pathsvBMaps a URL to a filesystem location and designates the target as a CGI script -ScriptAliasMatch regex -file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression +ScriptAliasMatch regex +file-path|directory-pathsvBMaps a URL to a filesystem location using a regular expression and designates the target as a CGI script -ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI +ScriptInterpreterSource Registry|Registry-Strict|Script Script svdhCTechnique for locating the interpreter for CGI scripts -ScriptLog file-pathsvBLocation of the CGI script error logfile -ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded +ScriptLog file-pathsvBLocation of the CGI script error logfile +ScriptLogBuffer bytes 1024 svBMaximum amount of PUT or POST requests that will be recorded in the scriptlog -ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile -ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with +ScriptLogLength bytes 10385760 svBSize limit of the CGI script logfile +ScriptSock file-path cgisock sBThe filename prefix of the socket to use for communication with the cgi daemon -SecureListen [IP-address:]portnumber -Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port -SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters +SecureListen [IP-address:]portnumber +Certificate-Name [MUTUAL]sBEnables SSL encryption for the specified port +SeeRequestTail On|Off Off sCDetermine if mod_status displays the first 63 characters of a request or the last 63, assuming the request itself is greater than 63 chars. -SendBufferSize bytes 0 sMTCP buffer size -ServerAdmin email-address|URLsvCEmail address that the server includes in error +SendBufferSize bytes 0 sMTCP buffer size +ServerAdmin email-address|URLsvCEmail address that the server includes in error messages sent to the client -ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests +ServerAlias hostname [hostname] ...vCAlternate names for a host used when matching requests to name-virtual hosts -ServerLimit numbersMUpper limit on configurable number of processes -ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify +ServerLimit numbersMUpper limit on configurable number of processes +ServerName [scheme://]fully-qualified-domain-name[:port]svCHostname and port that the server uses to identify itself -ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that +ServerPath URL-pathvCLegacy URL pathname for a name-based virtual host that is accessed by an incompatible browser -ServerRoot directory-path /usr/local/apache sCBase directory for the server installation -ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents -ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response +ServerRoot directory-path /usr/local/apache sCBase directory for the server installation +ServerSignature On|Off|EMail Off svdhCConfigures the footer on server-generated documents +ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full Full sCConfigures the Server HTTP response header -Session On|Off Off svdhEEnables a session for the current directory or location -SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session -SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session -SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers -SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session -SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session -SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session -SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session -SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID -SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID -SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers -SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database -SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database -SessionDBDPerUser On|Off Off svdhEEnable a per user session -SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database -SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database -SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the +Session On|Off Off svdhEEnables a session for the current directory or location +SessionCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session +SessionCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session +SessionCookieRemove On|Off Off svdhEControl for whether session cookies should be removed from incoming HTTP headers +SessionCryptoCipher namesvdhXThe crypto cipher to be used to encrypt the session +SessionCryptoDriver name [param[=value]]sXThe crypto driver to be used to encrypt the session +SessionCryptoPassphrase secret [ secret ... ] svdhXThe key used to encrypt the session +SessionCryptoPassphraseFile filenamesvdXFile containing keys used to encrypt the session +SessionDBDCookieName name attributessvdhEName and attributes for the RFC2109 cookie storing the session ID +SessionDBDCookieName2 name attributessvdhEName and attributes for the RFC2965 cookie storing the session ID +SessionDBDCookieRemove On|Off On svdhEControl for whether session ID cookies should be removed from incoming HTTP headers +SessionDBDDeleteLabel label deletesession svdhEThe SQL query to use to remove sessions from the database +SessionDBDInsertLabel label insertsession svdhEThe SQL query to use to insert sessions into the database +SessionDBDPerUser On|Off Off svdhEEnable a per user session +SessionDBDSelectLabel label selectsession svdhEThe SQL query to use to select sessions from the database +SessionDBDUpdateLabel label updatesession svdhEThe SQL query to use to update existing sessions in the database +SessionEnv On|Off Off svdhEControl whether the contents of the session are written to the HTTP_SESSION environment variable -SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored -SessionHeader headersvdhEImport session updates from a given HTTP response header -SessionInclude pathsvdhEDefine URL prefixes for which a session is valid -SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session -SetEnv env-variable [value]svdhBSets environment variables -SetEnvIf attribute +SessionExclude pathsvdhEDefine URL prefixes for which a session is ignored +SessionHeader headersvdhEImport session updates from a given HTTP response header +SessionInclude pathsvdhEDefine URL prefixes for which a session is valid +SessionMaxAge maxage 0 svdhEDefine a maximum age in seconds for a session +SetEnv env-variable [value]svdhBSets environment variables +SetEnvIf attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request -SetEnvIfExpr expr +SetEnvIfExpr expr [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression -SetEnvIfNoCase attribute regex + [[!]env-variable[=value]] ...svdhBSets environment variables based on an ap_expr expression +SetEnvIfNoCase attribute regex [!]env-variable[=value] - [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request + [[!]env-variable[=value]] ...svdhBSets environment variables based on attributes of the request without respect to case -SetHandler handler-name|NonesvdhCForces all matching files to be processed by a +SetHandler handler-name|NonesvdhCForces all matching files to be processed by a handler -SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST +SetInputFilter filter[;filter...]svdhCSets the filters that will process client requests and POST input -SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the +SetOutputFilter filter[;filter...]svdhCSets the filters that will process responses from the server -SSIEndTag tag "-->" svBString that ends an include element -SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI +SSIEndTag tag "-->" svBString that ends an include element +SSIErrorMsg message "[an error occurred +svdhBError message displayed when there is an SSI error -SSIETag on|off off dhBControls whether ETags are generated by the server. -SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the +SSIETag on|off off dhBControls whether ETags are generated by the server. +SSILastModified on|off off dhBControls whether Last-Modified headers are generated by the server. -SSILegacyExprParser on|off off dhBEnable compatibility mode for conditional expressions. -SSIStartTag tag " - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.de b/docs/manual/sitemap.html.de index fe5c1d899d4..92ba39ac873 100644 --- a/docs/manual/sitemap.html.de +++ b/docs/manual/sitemap.html.de @@ -237,10 +237,11 @@ HPUX betreiben
Apache-Modul mod_ext_filter

Apache-Modul mod_file_cache

Apache-Modul mod_filter
-
Apache-Modul mod_http2
+
Apache-Modul mod_h2

Apache-Modul mod_headers

Apache-Modul mod_heartbeat

Apache-Modul mod_heartmonitor
+
Apache-Modul mod_http2

Apache-Modul mod_ident

Apache-Modul mod_imagemap

Apache-Modul mod_include
@@ -363,4 +364,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.en b/docs/manual/sitemap.html.en index 1ef22b85b18..26b5c4f7a76 100644 --- a/docs/manual/sitemap.html.en +++ b/docs/manual/sitemap.html.en @@ -237,10 +237,11 @@ log_server_status
Apache Module mod_ext_filter

Apache Module mod_file_cache

Apache Module mod_filter
-
Apache Module mod_http2
+
Apache Module mod_h2

Apache Module mod_headers

Apache Module mod_heartbeat

Apache Module mod_heartmonitor
+
Apache Module mod_http2

Apache Module mod_ident

Apache Module mod_imagemap

Apache Module mod_include
@@ -362,4 +363,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.es b/docs/manual/sitemap.html.es index 2fe99aa8e26..42ebd81123e 100644 --- a/docs/manual/sitemap.html.es +++ b/docs/manual/sitemap.html.es @@ -219,10 +219,11 @@ usados para describir las directivas de Apache
Módulo Apache mod_ext_filter

Módulo Apache mod_file_cache

Módulo Apache mod_filter
-
Módulo Apache mod_http2
+
Módulo Apache mod_h2

Módulo Apache mod_headers

Módulo Apache mod_heartbeat

Módulo Apache mod_heartmonitor
+
Módulo Apache mod_http2

Módulo Apache mod_ident

Módulo Apache mod_imagemap

Módulo Apache mod_include
@@ -342,4 +343,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.fr b/docs/manual/sitemap.html.fr index aa1de9ee9cd..2ba9323f4e0 100644 --- a/docs/manual/sitemap.html.fr +++ b/docs/manual/sitemap.html.fr @@ -252,10 +252,11 @@ pour d
Module Apache mod_ext_filter

Module Apache mod_file_cache

Module Apache mod_filter
-
Module Apache mod_http2
+
Module Apache mod_h2

Module Apache mod_headers

Module Apache mod_heartbeat

Module Apache mod_heartmonitor
+
Module Apache mod_http2

Module Apache mod_ident

Module Apache mod_imagemap

Module Apache mod_include
@@ -383,4 +384,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.ja.utf8 b/docs/manual/sitemap.html.ja.utf8 index 02f18fb3e19..233be2ec97a 100644 --- a/docs/manual/sitemap.html.ja.utf8 +++ b/docs/manual/sitemap.html.ja.utf8 @@ -218,10 +218,11 @@
Apache ã¢ã¸ã¥ã¼ã« mod_ext_filter

Apache ã¢ã¸ã¥ã¼ã« mod_file_cache

Apache ã¢ã¸ã¥ã¼ã« mod_filter
-
Apache ã¢ã¸ã¥ã¼ã« mod_http2
+
Apache ã¢ã¸ã¥ã¼ã« mod_h2

Apache ã¢ã¸ã¥ã¼ã« mod_headers

Apache ã¢ã¸ã¥ã¼ã« mod_heartbeat

Apache ã¢ã¸ã¥ã¼ã« mod_heartmonitor
+
Apache ã¢ã¸ã¥ã¼ã« mod_http2

Apache ã¢ã¸ã¥ã¼ã« mod_ident

Apache ã¢ã¸ã¥ã¼ã« mod_imagemap

Apache ã¢ã¸ã¥ã¼ã« mod_include
@@ -342,4 +343,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.ko.euc-kr b/docs/manual/sitemap.html.ko.euc-kr index 289c2b00bd0..6bb4effbad7 100644 --- a/docs/manual/sitemap.html.ko.euc-kr +++ b/docs/manual/sitemap.html.ko.euc-kr @@ -217,10 +217,11 @@
¾ÆÆÄÄ¡ ¸ðµâ mod_ext_filter

¾ÆÆÄÄ¡ ¸ðµâ mod_file_cache

¾ÆÆÄÄ¡ ¸ðµâ mod_filter
-
¾ÆÆÄÄ¡ ¸ðµâ mod_http2
+
¾ÆÆÄÄ¡ ¸ðµâ mod_h2

¾ÆÆÄÄ¡ ¸ðµâ mod_headers

¾ÆÆÄÄ¡ ¸ðµâ mod_heartbeat

¾ÆÆÄÄ¡ ¸ðµâ mod_heartmonitor
+
¾ÆÆÄÄ¡ ¸ðµâ mod_http2

¾ÆÆÄÄ¡ ¸ðµâ mod_ident

¾ÆÆÄÄ¡ ¸ðµâ mod_imagemap

¾ÆÆÄÄ¡ ¸ðµâ mod_include
@@ -340,4 +341,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.tr.utf8 b/docs/manual/sitemap.html.tr.utf8 index 9bc35618a7e..45d7c7236c3 100644 --- a/docs/manual/sitemap.html.tr.utf8 +++ b/docs/manual/sitemap.html.tr.utf8 @@ -232,10 +232,11 @@ Windows ile Apache KullanÄ±mÄ±
Apache ModÃ¼lÃ¼ mod_ext_filter

Apache ModÃ¼lÃ¼ mod_file_cache

Apache ModÃ¼lÃ¼ mod_filter
-
Apache ModÃ¼lÃ¼ mod_http2
+
Apache ModÃ¼lÃ¼ mod_h2

Apache ModÃ¼lÃ¼ mod_headers

Apache ModÃ¼lÃ¼ mod_heartbeat

Apache ModÃ¼lÃ¼ mod_heartmonitor
+
Apache ModÃ¼lÃ¼ mod_http2

Apache ModÃ¼lÃ¼ mod_ident

Apache ModÃ¼lÃ¼ mod_imagemap

Apache ModÃ¼lÃ¼ mod_include
@@ -357,4 +358,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file diff --git a/docs/manual/sitemap.html.zh-cn.utf8 b/docs/manual/sitemap.html.zh-cn.utf8 index f63b1238a4e..79617013e3f 100644 --- a/docs/manual/sitemap.html.zh-cn.utf8 +++ b/docs/manual/sitemap.html.zh-cn.utf8 @@ -218,10 +218,11 @@
Apache æ¨¡å mod_ext_filter

Apache æ¨¡å mod_file_cache

Apache æ¨¡å mod_filter
-
Apache æ¨¡å mod_http2
+
Apache æ¨¡å mod_h2

Apache æ¨¡å mod_headers

Apache æ¨¡å mod_heartbeat

Apache æ¨¡å mod_heartmonitor
+
Apache æ¨¡å mod_http2

Apache æ¨¡å mod_ident

Apache æ¨¡å mod_imagemap

Apache æ¨¡å mod_include
@@ -340,4 +341,4 @@ if (typeof(prettyPrint) !== 'undefined') { prettyPrint(); } //--> - + \ No newline at end of file