From: Peter Krempa Date: Fri, 13 May 2022 08:31:34 +0000 (+0200) Subject: docs: formatdomain: Remove 'elementsNICSTargetOverride' anchor X-Git-Tag: v8.5.0-rc1~259 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=99e01a44e43fdba0f5f785275cf59ee2e19cf6c1;p=thirdparty%2Flibvirt.git docs: formatdomain: Remove 'elementsNICSTargetOverride' anchor Signed-off-by: Peter Krempa Reviewed-by: Ján Tomko --- diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index bbf26edeba..d9d262d959 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -4513,8 +4513,7 @@ can be determined by examining the virtual network config with 'default' setup out of the box which does NAT'ing to the default route and has an IP range of ``192.168.122.0/255.255.255.0``. Each guest will have an associated tun device created with a name of vnetN, which can also be overridden -with the element (see `overriding the target -element <#elementsNICSTargetOverride>`__). +with the element (see `Overriding the target element`_). When the source of an interface is a network, a ``portgroup`` can be specified along with the name of the network; one network may have multiple portgroups @@ -4580,8 +4579,8 @@ static wired networking configs.** Provides a bridge from the VM directly to the LAN. This assumes there is a bridge device on the host which has one or more of the hosts physical NICs attached. The guest VM will have an associated tun device created with a name of -vnetN, which can also be overridden with the element (see `overriding -the target element <#elementsNICSTargetOverride>`__). The tun device will be +vnetN, which can also be overridden with the element (see +`Overriding the target element`_). The tun device will be attached to the bridge. The IP range / network configuration is whatever is used on the LAN. This provides the guest VM full incoming & outgoing net access just like a physical machine. @@ -5331,7 +5330,6 @@ bridge interfaces. This does not work in session mode. :since:`Since 1.2.9` For tap devices there is also ``sndbuf`` element which can adjust the size of send buffer in the host. :since:`Since 0.8.8` -:anchor:`` Overriding the target element ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^