From: Jorge Marques Date: Wed, 17 Dec 2025 12:13:24 +0000 (+0100) Subject: dt-bindings: iio: adc: Add adi,ad4062 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9e6c7656b9977e902fe7a99d61da00e3f6bc41a4;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: iio: adc: Add adi,ad4062 Add dt-bindings for AD4062 family, devices AD4060/AD4062, low-power with monitor capabilities SAR ADCs. Each variant of the family differs in resolution. The device contains two outputs (gp0, gp1). The outputs can be configured for range of options, such as threshold and data ready. The device uses a 2-wire I3C interface. Signed-off-by: Jorge Marques Reviewed-by: Rob Herring (Arm) Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml new file mode 100644 index 000000000000..eeb148081663 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4062.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4062 ADC family device driver + +maintainers: + - Jorge Marques + +description: | + Analog Devices AD4062 Single Channel Precision SAR ADC family + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4060.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4062.pdf + +properties: + compatible: + enum: + - adi,ad4060 + - adi,ad4062 + + reg: + maxItems: 1 + + interrupts: + description: + Two pins are available that can be configured as either a general purpose + digital output, device enable signal (used to synchronise other parts of + the signal chain with ADC sampling), device ready (GP1 only) or various + interrupt signals. If intended for use as a GPIO or device enable, will not + present here. + minItems: 1 + items: + - description: + GP0 pin, cannot be configured as DEV_RDY. + - description: + GP1 pin, can be configured to any setting. + + interrupt-names: + minItems: 1 + items: + - const: gp0 + - const: gp1 + + gpio-controller: + description: + Marks the device node as a GPIO controller. GPs not listed as interrupts + are exposed as a GPO. + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies + GPIO flags, as defined in . + + vdd-supply: + description: Analog power supply. + + vio-supply: + description: Digital interface logic power supply. + + ref-supply: + description: + Reference voltage to set the ADC full-scale range. If not present, + vdd-supply is used as the reference voltage. + +required: + - compatible + - reg + - vdd-supply + - vio-supply + +allOf: + - $ref: /schemas/i3c/i3c.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i3c { + #address-cells = <3>; + #size-cells = <0>; + + adc@0,2ee007c0000 { + reg = <0x0 0x2ee 0x7c0000>; + vdd-supply = <&vdd>; + vio-supply = <&vio>; + ref-supply = <&ref>; + + interrupt-parent = <&gpio>; + interrupts = <0 0 IRQ_TYPE_EDGE_RISING>, + <0 1 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "gp0", "gp1"; + }; + }; + + - | + #include + #include + + i3c { + #address-cells = <3>; + #size-cells = <0>; + + adc@0,2ee007c0000 { + reg = <0x0 0x2ee 0x7c0000>; + vdd-supply = <&vdd>; + vio-supply = <&vio>; + ref-supply = <&ref>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 9a42d20144a4..dfd06a31c969 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1433,6 +1433,12 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml F: Documentation/iio/ad4030.rst F: drivers/iio/adc/ad4030.c +ANALOG DEVICES INC AD4062 DRIVER +M: Jorge Marques +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml + ANALOG DEVICES INC AD4080 DRIVER M: Antoniu Miclaus L: linux-iio@vger.kernel.org