From: Sergey Matsievskiy Date: Wed, 25 Sep 2024 18:44:15 +0000 (+0300) Subject: irqchip/ocelot: Fix trigger register address X-Git-Tag: v6.12-rc4~7^2~7 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9e9c4666abb5bb444dac37e2d7eb5250c8d52a45;p=thirdparty%2Fkernel%2Flinux.git irqchip/ocelot: Fix trigger register address Controllers, supported by this driver, have two sets of registers: * (main) interrupt registers control peripheral interrupt sources. * device interrupt registers configure per-device (network interface) interrupts and act as an extra stage before the main interrupt registers. In the driver unmask code, device trigger registers are used in the mask calculation of the main interrupt sticky register, mixing two kinds of registers. Use the main interrupt trigger register instead. Signed-off-by: Sergey Matsievskiy Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20240925184416.54204-2-matsievskiysv@gmail.com --- diff --git a/drivers/irqchip/irq-mscc-ocelot.c b/drivers/irqchip/irq-mscc-ocelot.c index 4d0c3532dbe73..c19ab379e8c5e 100644 --- a/drivers/irqchip/irq-mscc-ocelot.c +++ b/drivers/irqchip/irq-mscc-ocelot.c @@ -37,7 +37,7 @@ static struct chip_props ocelot_props = { .reg_off_ena_clr = 0x1c, .reg_off_ena_set = 0x20, .reg_off_ident = 0x38, - .reg_off_trigger = 0x5c, + .reg_off_trigger = 0x4, .n_irq = 24, }; @@ -70,7 +70,7 @@ static struct chip_props jaguar2_props = { .reg_off_ena_clr = 0x1c, .reg_off_ena_set = 0x20, .reg_off_ident = 0x38, - .reg_off_trigger = 0x5c, + .reg_off_trigger = 0x4, .n_irq = 29, };