From: Ming Qian Date: Tue, 1 Apr 2025 09:06:57 +0000 (+0800) Subject: media: amphion: Add a frame flush mode for decoder X-Git-Tag: v6.16-rc1~145^2~309 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9ea16ba6eaf93f25f61855751f71e2e701709ddf;p=thirdparty%2Flinux.git media: amphion: Add a frame flush mode for decoder By default the amphion decoder will pre-parse 3 frames before starting to decode the first frame. Alternatively, a block of flush padding data can be appended to the frame, which will ensure that the decoder can start decoding immediately after parsing the flush padding data, thus potentially reducing decoding latency. This mode was previously only enabled, when the display delay was set to 0. Allow the user to manually toggle the use of that mode via a module parameter called low_latency, which enables the mode without changing the display order. Signed-off-by: Ming Qian Reviewed-by: Nicolas Dufresne Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- diff --git a/drivers/media/platform/amphion/vpu_malone.c b/drivers/media/platform/amphion/vpu_malone.c index e07de425ab16f..feca7d4220ed7 100644 --- a/drivers/media/platform/amphion/vpu_malone.c +++ b/drivers/media/platform/amphion/vpu_malone.c @@ -26,6 +26,10 @@ #include "vpu_imx8q.h" #include "vpu_malone.h" +static bool low_latency; +module_param(low_latency, bool, 0644); +MODULE_PARM_DESC(low_latency, "Set low latency frame flush mode: 0 (disable) or 1 (enable)"); + #define CMD_SIZE 25600 #define MSG_SIZE 25600 #define CODEC_SIZE 0x1000 @@ -1581,7 +1585,15 @@ static int vpu_malone_input_frame_data(struct vpu_malone_str_buffer __iomem *str vpu_malone_update_wptr(str_buf, wptr); - if (disp_imm && !vpu_vb_is_codecconfig(vbuf)) { + /* + * Enable the low latency flush mode if display delay is set to 0 + * or the low latency frame flush mode if it is set to 1. + * The low latency flush mode requires some padding data to be appended to each frame, + * but there must not be any padding data between the sequence header and the frame. + * This module is currently only supported for the H264 and HEVC formats, + * for other formats, vpu_malone_add_scode() will return 0. + */ + if ((disp_imm || low_latency) && !vpu_vb_is_codecconfig(vbuf)) { ret = vpu_malone_add_scode(inst->core->iface, inst->id, &inst->stream_buffer,