From: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Date: Mon, 27 May 2024 09:34:13 +0000 (+0200)
Subject: arm64: zynqmp: Disable Tri-state for SDIO
X-Git-Tag: v6.11-rc1~188^2~39^2~5
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a082e297fa18d96a41ccc308eb31675ffd3a47f8;p=thirdparty%2Flinux.git

arm64: zynqmp: Disable Tri-state for SDIO

Since the zynqmp pinctrl driver now includes support for the
tri-state registers, ensure that the pins needing output-enable
are correctly configured for SOMs.

Currently, there is an issue with the detection of the MMC for
the SOM kv260, resulting in the following error:
ZynqMP> mmc dev 1
Card did not respond to voltage select! : -110

To address this problem, configure the SDIO pins for output-enable
to enable MMC detection.

Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/540f83f7d88b80441c9fa3d771dd7b000b0710a4.1716802450.git.michal.simek@amd.com
---

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index d7535a77b45e3..a09909a6f8853 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -321,6 +321,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		conf-cd {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a7b8fffad4993..b3b8875f8f7a1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -305,6 +305,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		conf-cd {