From: Rob Herring (Arm) Date: Thu, 30 Oct 2025 19:52:33 +0000 (-0500) Subject: dt-bindings: thermal: Drop db8500-thermal.txt X-Git-Tag: v6.19-rc1~138^2~32 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a18b0c924870c050222c71c2b3a8fb341a21f961;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: thermal: Drop db8500-thermal.txt The binding is already defined in mfd/stericsson,db8500-prcmu.yaml and none of 'the tripN.*' properties appear to be in use. Acked-by: Conor Dooley Link: https://patch.msgid.link/20251030195234.439141-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) --- diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt deleted file mode 100644 index 2e1c06fad81fe..0000000000000 --- a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ST-Ericsson DB8500 Thermal - -** Thermal node properties: - -- compatible : "stericsson,db8500-thermal"; -- reg : address range of the thermal sensor registers; -- interrupts : interrupts generated from PRCMU; -- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; -- num-trips : number of total trip points, this is required, set it 0 if none, - if greater than 0, the following properties must be defined; -- tripN-temp : temperature of trip point N, should be in ascending order; -- tripN-type : type of trip point N, should be one of "active" "passive" "hot" - "critical"; -- tripN-cdev-num : number of the cooling devices which can be bound to trip - point N, this is required if trip point N is defined, set it 0 if none, - otherwise the following cooling device names must be defined; -- tripN-cdev-nameM : name of the No. M cooling device of trip point N; - -Usually the num-trips and tripN-*** are separated in board related dts files. - -Example: -thermal@801573c0 { - compatible = "stericsson,db8500-thermal"; - reg = <0x801573c0 0x40>; - interrupts = <21 0x4>, <22 0x4>; - interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; - - num-trips = <3>; - - trip0-temp = <75000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <80000>; - trip1-type = "active"; - trip1-cdev-num = <2>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - trip1-cdev-name1 = "thermal-fan"; - - trip2-temp = <85000>; - trip2-type = "critical"; - trip2-cdev-num = <0>; -}