From: Chen-Yu Tsai Date: Tue, 23 Sep 2025 14:02:46 +0000 (+0800) Subject: arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port X-Git-Tag: v6.19-rc1~100^2~22^2~7 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a3606e8a7819534026b46e2b8c7b0e156e292f13;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port On the Orangepi 4A board, the second Ethernet controller, aka the GMAC200, is connected to an external Motorcomm YT8531 PHY. The PHY uses an external 25MHz crystal, has the SoC's PI15 pin connected to its reset pin, and the PI16 pin for its interrupt pin. Enable it. Acked-by: Jernej Skrabec Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250923140247.2622602-7-wens@kernel.org Signed-off-by: Chen-Yu Tsai --- diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts index 39a4e194712a2..9e6b21cf293ee 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -15,6 +15,7 @@ compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527"; aliases { + ethernet0 = &gmac1; serial0 = &uart0; }; @@ -102,11 +103,33 @@ status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <0>; + rx-internal-delay-ps = <300>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; +&mdio1 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupts-extended = <&pio 8 16 IRQ_TYPE_LEVEL_LOW>; /* PI16 */ + reset-gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */