From: Josua Mayer <josua@solid-run.com>
Date: Tue, 24 Mar 2026 12:41:04 +0000 (+0100)
Subject: arm64: dts: lx2162a-clearfog: set sfp connector leds function and source
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a43212e427b540b39e22511a0a993e7d3e578d56;p=thirdparty%2Fkernel%2Fstable.git

arm64: dts: lx2162a-clearfog: set sfp connector leds function and source

LX2162A Clearfog has four LEDs attached physically to the 4-port SFP
connector. They are intended to show information relating to network
interface status.

Select "netdev" as default trigger for each LED, and link each one to
the respective dpmac instance as trigger-source.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
index 8920326a0673..9d50d3e2761d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
@@ -41,21 +41,29 @@
 		led_sfp_at: led-sfp-at {
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */
 			default-state = "off";
+			linux,default-trigger = "netdev";
+			trigger-sources = <&dpmac3>;
 		};
 
 		led_sfp_ab: led-sfp-ab {
 			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */
 			default-state = "off";
+			linux,default-trigger = "netdev";
+			trigger-sources = <&dpmac4>;
 		};
 
 		led_sfp_bt: led-sfp-bt {
 			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */
 			default-state = "off";
+			linux,default-trigger = "netdev";
+			trigger-sources = <&dpmac5>;
 		};
 
 		led_sfp_bb: led-sfp-bb {
 			gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */
 			default-state = "off";
+			linux,default-trigger = "netdev";
+			trigger-sources = <&dpmac6>;
 		};
 	};