From: Rong Zhang <i@rong.moe>
Date: Sat, 30 May 2026 19:52:49 +0000 (+0800)
Subject: ALSA: usb-audio: Set the value of potential sticky mixers to maximum
X-Git-Tag: v7.1-rc7~8^2~4
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=aa2f4addab44407c7aa742321de5dc1914ab5762;p=thirdparty%2Flinux.git

ALSA: usb-audio: Set the value of potential sticky mixers to maximum

It makes no sense to restore the saved value for a sticky mixer, since
setting any value is a no-op.

However, in some rare cases, SET_CUR is effective despite GET_CUR always
returns a constant value. These mixers are not sticky, but there's no
way to distinguish them. Without any additional information, the best
thing we can do is to set the mixer value to the maximum before bailing
out, so that a soft mixer can still reach the maximum hardware volume if
the mixer turns out to be non-sticky. Meanwhile, all channels must be
synchronized to prevent imbalance volume.

Fixes: 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260531-uac-sticky-error-path-v1-1-12c2329d17ef@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 5fba456eb4a96..fb37bb8ad9a9a 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1371,10 +1371,8 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
 				goto no_checks;
 
 			ret = check_sticky_volume_control(cval, minchn, saved);
-			if (ret < 0) {
-				snd_usb_set_cur_mix_value(cval, minchn, 0, saved);
-				return ret;
-			}
+			if (ret < 0)
+				goto sticky;
 
 			if (cval->min + cval->res < cval->max)
 				check_volume_control_res(cval, minchn, saved);
@@ -1431,6 +1429,33 @@ no_checks:
 	}
 
 	return 0;
+
+sticky:
+	/*
+	 * It makes no sense to restore the saved value for a sticky mixer,
+	 * since setting any value is a no-op.
+	 *
+	 * However, in some rare cases, SET_CUR is effective despite GET_CUR
+	 * always returns a constant value. These mixers are not sticky, but
+	 * there's no way to distinguish them. Without any additional
+	 * information, the best thing we can do is to set the mixer value to
+	 * the maximum before bailing out, so that a soft mixer can still reach
+	 * the maximum hardware volume if the mixer turns out to be non-sticky.
+	 * Meanwhile, all channels must be synchronized to prevent imbalance
+	 * volume.
+	 */
+	if (!cval->cmask) {
+		snd_usb_set_cur_mix_value(cval, 0, 0, cval->max);
+	} else {
+		for (i = 0; i < MAX_CHANNELS; i++) {
+			idx = 0;
+			if (cval->cmask & BIT(i)) {
+				snd_usb_set_cur_mix_value(cval, i + 1, idx, cval->max);
+				idx++;
+			}
+		}
+	}
+	return ret;
 }
 
 #define get_min_max(cval, def)	get_min_max_with_quirks(cval, def, NULL)