From: Chintan Vankar <c-vankar@ti.com>
Date: Wed, 9 Jul 2025 10:53:25 +0000 (+0530)
Subject: arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot
X-Git-Tag: v6.17-rc1~172^2~14^2~5
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ab9ec669cf74b6499c0de4f42a6dd756a4e4e2a1;p=thirdparty%2Flinux.git

arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to required nodes to enable Ethernet boot
for J722S-EVM.

Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20250709105326.232608-4-c-vankar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index d0533723412a8..9d8abfa9afd27 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -282,6 +282,14 @@
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &main_pmx0 {
 
 	main_mcan0_pins_default: main-mcan0-default-pins {
@@ -346,6 +354,7 @@
 			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
 			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -380,6 +389,7 @@
 			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
 			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -424,6 +434,7 @@
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -434,6 +445,7 @@
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
+	bootph-all;
 };
 
 &main_gpio1 {