From: Birger Koblitz Date: Tue, 5 May 2026 15:56:34 +0000 (+0200) Subject: r8152: Add support for the RTL8159 chip X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ad2a55b63b41af6431bfdde611ca5cf79e21ff51;p=thirdparty%2Flinux.git r8152: Add support for the RTL8159 chip The RTL8159 re-uses the packet descriptor format introduced with the RTL8157 and other hardware features of the RTL8157 (RTL_VER_16) such as the SRAM access. The support therefore consists in expanding the existing RTL8157 code for initialization and USB power management to also be used for the RTL8159 (RTL_VER_17). Most of the additional code is added in r8157_hw_phy_cfg() to configure the RTL8159 PHY. Add support for the USB device ID of Realtek RTL8159-based adapters, for which the product ID is 0x815a. Detect the RTL8159 as RTL_VER_17 and set it up. Signed-off-by: Birger Koblitz Tested-by: Aleksander Jan Bajkowski Link: https://patch.msgid.link/20260505-rtl8159_net_next-v4-2-1a648a9c4d8d@birger-koblitz.de Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 05abfab1df94..1e7f20348ac6 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1247,6 +1247,7 @@ enum rtl_version { RTL_VER_14, RTL_VER_15, RTL_VER_16, + RTL_VER_17, RTL_VER_MAX }; @@ -3432,6 +3433,7 @@ static void rtl8152_nic_reset(struct r8152 *tp) break; case RTL_VER_16: + case RTL_VER_17: ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_CR, CR_RE | CR_TE); break; @@ -3471,6 +3473,9 @@ static void rtl_eee_plus_en(struct r8152 *tp, bool enable) static void rtl_set_eee_plus(struct r8152 *tp) { + if (tp->version == RTL_VER_17) + return rtl_eee_plus_en(tp, false); + if (rtl8152_get_speed(tp) & _10bps) rtl_eee_plus_en(tp, true); else @@ -3656,6 +3661,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) case RTL_VER_13: case RTL_VER_15: case RTL_VER_16: + case RTL_VER_17: ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, 640 / 8); ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR, @@ -3700,6 +3706,7 @@ static void r8153_set_rx_early_size(struct r8152 *tp) ocp_data / 8); break; case RTL_VER_16: + case RTL_VER_17: ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data / 16); break; @@ -4548,6 +4555,7 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type) break; case RTL_VER_14: case RTL_VER_16: + case RTL_VER_17: default: ocp_write_word(tp, type, USB_BP2_EN, 0); bp_num = 16; @@ -5818,6 +5826,7 @@ static void rtl_eee_enable(struct r8152 *tp, bool enable) case RTL_VER_13: case RTL_VER_15: case RTL_VER_16: + case RTL_VER_17: if (enable) { r8156_eee_en(tp, true); ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv); @@ -6408,7 +6417,7 @@ static int rtl8156_enable(struct r8152 *tp) set_tx_qlen(tp); rtl_set_eee_plus(tp); - if (tp->version >= RTL_VER_12 && tp->version <= RTL_VER_16) + if (tp->version >= RTL_VER_12 && tp->version <= RTL_VER_17) ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, RX_AGGR_NUM_MASK); r8153_set_rx_early_timeout(tp); @@ -6817,7 +6826,7 @@ static void rtl8156_up(struct r8152 *tp) return; r8153b_u1u2en(tp, false); - if (tp->version != RTL_VER_16) + if (tp->version < RTL_VER_16) r8153_u2p3en(tp, false); r8153_aldps_en(tp, false); @@ -6831,7 +6840,7 @@ static void rtl8156_up(struct r8152 *tp) ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB); - if (tp->version == RTL_VER_16) + if (tp->version >= RTL_VER_16) ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR1, BIT(3)); ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN); @@ -6856,7 +6865,7 @@ static void rtl8156_up(struct r8152 *tp) ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, PLA_MCU_SPDWN_EN); - if (tp->version != RTL_VER_16) + if (tp->version < RTL_VER_16) ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_SPEED_OPTION, RG_PWRDN_EN | ALL_SPEED_OFF); @@ -6868,10 +6877,10 @@ static void rtl8156_up(struct r8152 *tp) } r8153_aldps_en(tp, true); - if (tp->version != RTL_VER_16) + if (tp->version < RTL_VER_16) r8153_u2p3en(tp, true); - if (tp->version != RTL_VER_16 && tp->udev->speed >= USB_SPEED_SUPER) + if (tp->version < RTL_VER_16 && tp->udev->speed >= USB_SPEED_SUPER) r8153b_u1u2en(tp, true); } @@ -6886,7 +6895,7 @@ static void rtl8156_down(struct r8152 *tp) PLA_MCU_SPDWN_EN); r8153b_u1u2en(tp, false); - if (tp->version != RTL_VER_16) { + if (tp->version < RTL_VER_16) { r8153_u2p3en(tp, false); r8153b_power_cut_en(tp, false); } @@ -7996,7 +8005,7 @@ static void r8157_hw_phy_cfg(struct r8152 *tp) /* Advanced Power Saving parameter */ ocp_reg_set_bits(tp, 0xa430, BIT(0) | BIT(1)); - /* aldpsce force mode */ + /* Disable ALDPS force mode */ ocp_reg_clr_bits(tp, 0xa44a, BIT(2)); switch (tp->version) { @@ -8120,6 +8129,190 @@ static void r8157_hw_phy_cfg(struct r8152 *tp) sram2_write_w0w1(tp, 0x807c, 0xff00, 0x5000); sram2_write_w0w1(tp, 0x809d, 0xff00, 0x5000); break; + + case RTL_VER_17: + /* Disable bypass turn off clk in ALDPS */ + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, 0xd3c8, BIT(0)); + + /* Power level tuning + * test mode power level + */ + sram_write_w0w1(tp, 0x8415, 0xff00, 0x9300); + /* normal link power level 10G, 5G, 2.5G */ + sram_write_w0w1(tp, 0x81a3, 0xff00, 0x0f00); + sram_write_w0w1(tp, 0x81ae, 0xff00, 0x0f00); + sram_write_w0w1(tp, 0x81b9, 0xff00, 0xb900); + /* normal link TX filter */ + sram2_write_w0w1(tp, 0x83b0, 0x0e00, 0); + sram2_write_w0w1(tp, 0x83c5, 0x0e00, 0); + sram2_write_w0w1(tp, 0x83da, 0x0e00, 0); + sram2_write_w0w1(tp, 0x83ef, 0x0e00, 0); + + /* AFE power saving for 2.5G & 5G */ + sram_write(tp, 0x8173, 0x8620); + sram_write(tp, 0x8175, 0x8671); + + sram_write_w0w1(tp, 0x817c, 0, BIT(13)); + sram_write_w0w1(tp, 0x8187, 0, BIT(13)); + sram_write_w0w1(tp, 0x8192, 0, BIT(13)); + sram_write_w0w1(tp, 0x819d, 0, BIT(13)); + sram_write_w0w1(tp, 0x81a8, BIT(13), 0); + sram_write_w0w1(tp, 0x81b3, BIT(13), 0); + sram_write_w0w1(tp, 0x81be, 0, BIT(13)); + + sram_write_w0w1(tp, 0x817d, 0xff00, 0xa600); + sram_write_w0w1(tp, 0x8188, 0xff00, 0xa600); + sram_write_w0w1(tp, 0x8193, 0xff00, 0xa600); + sram_write_w0w1(tp, 0x819e, 0xff00, 0xa600); + sram_write_w0w1(tp, 0x81a9, 0xff00, 0x1400); + sram_write_w0w1(tp, 0x81b4, 0xff00, 0x1400); + sram_write_w0w1(tp, 0x81bf, 0xff00, 0xa600); + + /* RFI parameter + * disable preset FBE + */ + ocp_reg_clr_bits(tp, 0xaeaa, BIT(5) | BIT(3)); + /* modify PGA for 5G&10G */ + sram2_write(tp, 0x84f0, 0x201c); + sram2_write(tp, 0x84f2, 0x3117); + /* RFI parameter */ + ocp_reg_write(tp, 0xaec6, 0x0000); + ocp_reg_write(tp, 0xae20, 0xffff); + ocp_reg_write(tp, 0xaece, 0xffff); + ocp_reg_write(tp, 0xaed2, 0xffff); + ocp_reg_write(tp, 0xaec8, 0x0000); + ocp_reg_clr_bits(tp, 0xaed0, BIT(0)); + ocp_reg_write(tp, 0xadb8, 0x0150); + sram2_write_w0w1(tp, 0x8197, 0xff00, 0x5000); + sram2_write_w0w1(tp, 0x8231, 0xff00, 0x5000); + sram2_write_w0w1(tp, 0x82cb, 0xff00, 0x5000); + sram2_write_w0w1(tp, 0x82cd, 0xff00, 0x5700); + sram2_write_w0w1(tp, 0x8233, 0xff00, 0x5700); + sram2_write_w0w1(tp, 0x8199, 0xff00, 0x5700); + + sram2_write(tp, 0x815a, 0x0150); + sram2_write(tp, 0x81f4, 0x0150); + sram2_write(tp, 0x828e, 0x0150); + sram2_write(tp, 0x81b1, 0x0000); + sram2_write(tp, 0x824b, 0x0000); + sram2_write(tp, 0x82e5, 0x0000); + + sram2_write_w0w1(tp, 0x84f7, 0xff00, 0x2800); + ocp_reg_set_bits(tp, 0xaec2, BIT(12)); + sram2_write_w0w1(tp, 0x81b3, 0xff00, 0xad00); + sram2_write_w0w1(tp, 0x824d, 0xff00, 0xad00); + sram2_write_w0w1(tp, 0x82e7, 0xff00, 0xad00); + ocp_reg_w0w1(tp, 0xae4e, 0x000f, 0x0001); + sram2_write_w0w1(tp, 0x82ce, 0xf000, 0x4000); + + /* 5G shift sel, default = '04' + * 10G shift sel, default = '03' + */ + sram2_write_w0w1(tp, 0x83a5, 0xff00, 0x0400); + sram2_write_w0w1(tp, 0x83a6, 0xff00, 0x0400); + sram2_write_w0w1(tp, 0x83a7, 0xff00, 0x0400); + sram2_write_w0w1(tp, 0x83a8, 0xff00, 0x0400); + + /* XG INRX parameters + * RC coefficients + */ + sram2_write(tp, 0x84ac, 0x0000); + sram2_write(tp, 0x84ae, 0x0000); + sram2_write(tp, 0x84b0, 0xf818); + sram2_write_w0w1(tp, 0x84b2, 0xff00, 0x6000); + /* Training AAGC PAR (with uc2 patch) */ + sram2_write(tp, 0x8ffc, 0x6008); + sram2_write(tp, 0x8ffe, 0xf450); + /* DAC BGK */ + sram2_write_w0w1(tp, 0x8015, 0, BIT(9)); + sram2_write_w0w1(tp, 0x8016, 0, BIT(11)); + sram2_write_w0w1(tp, 0x8fe6, 0xff00, 0x0800); + sram2_write(tp, 0x8fe4, 0x2114); + /* 10G PBO table */ + sram2_write(tp, 0x8647, 0xa7b1); + sram2_write(tp, 0x8649, 0xbbca); + sram2_write_w0w1(tp, 0x864b, 0xff00, 0xdc00); + /* 2.5G ado power window size */ + sram2_write_w0w1(tp, 0x8154, 0xc000, 0x4000); + sram2_write_w0w1(tp, 0x8158, 0xc000, 0); + /* 10G lock far */ + sram2_write(tp, 0x826c, 0xffff); + sram2_write(tp, 0x826e, 0xffff); + /* XG INRX parameter */ + sram2_write_w0w1(tp, 0x8872, 0xff00, 0x0e00); + sram_write_w0w1(tp, 0x8012, 0, BIT(11)); + sram_write_w0w1(tp, 0x8012, 0, BIT(14)); + ocp_reg_set_bits(tp, 0xb576, BIT(0)); + sram_write_w0w1(tp, 0x834a, 0xff00, 0x0700); + sram2_write_w0w1(tp, 0x8217, 0x3f00, 0x2a00); + sram_write_w0w1(tp, 0x81b1, 0xff00, 0x0b00); + sram2_write_w0w1(tp, 0x8fed, 0xff00, 0x4e00); + /* Slave about EC mu of datamode AAGC and DAC BG */ + sram2_write_w0w1(tp, 0x88ac, 0xff00, 0x2300); + /* improve UBE */ + ocp_reg_set_bits(tp, 0xbf0c, 0x7 << 11); + /* close Sparse NEC, improve connect 5EUU cable performance */ + sram2_write_w0w1(tp, 0x88de, 0xff00, 0); + /* 5G slave compatibility issue */ + sram2_write(tp, 0x80b4, 0x5195); + + /* XG Test Mode + * xgtstm_map_tbl for mdi_cap_sel + */ + sram_write(tp, 0x8370, 0x8671); + sram_write(tp, 0x8372, 0x86c8); + /* xgtstm_amp_map_tbl for REG_IBX_UP_SHIFT_L */ + sram_write(tp, 0x8401, 0x86c8); + sram_write(tp, 0x8403, 0x86da); + sram_write_w0w1(tp, 0x8406, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x8408, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x840a, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x840c, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x840e, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x8410, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x8412, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x8414, 0x1800, 0x1000); + sram_write_w0w1(tp, 0x8416, 0x1800, 0x1000); + + /* Cable Test Patch */ + sram_write(tp, 0x82bd, 0x1f40); + + /* Thermal sensor parameters */ + ocp_reg_w0w1(tp, 0xbfb4, 0x07ff, 0x0328); + ocp_reg_write(tp, 0xbfb6, 0x3e14); + + /* spdchg_gtx_shape_100M */ + ocp_reg_write(tp, OCP_SRAM_ADDR, 0x81c4); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x003b); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x0086); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00b7); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00db); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00fe); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00fe); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00fe); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00fe); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x00c3); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x0078); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x0047); + ocp_reg_write(tp, OCP_SRAM_DATA, 0x0023); + + /* lsbmsk_parameters + * RL6961_lsbmsk_parameter_250207 + */ + sram2_write(tp, 0x88d7, 0x01a0); + sram2_write(tp, 0x88d9, 0x01a0); + sram2_write(tp, 0x8ffa, 0x002a); + + sram2_write(tp, 0x8fee, 0xffdf); + sram2_write(tp, 0x8ff0, 0xffff); + sram2_write(tp, 0x8ff2, 0x0a4a); + sram2_write(tp, 0x8ff4, 0xaa5a); + sram2_write(tp, 0x8ff6, 0x0a4a); + sram2_write(tp, 0x8ff8, 0xaa5a); + + sram2_write_w0w1(tp, 0x88d5, 0xff00, 0x0200); + break; + default: break; } @@ -8155,6 +8348,18 @@ static void r8157_hw_phy_cfg(struct r8152 *tp) set_bit(PHY_RESET, &tp->flags); } +static int r8159_wait_backup_restore(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + if (!(ocp_data & PCUT_STATUS)) + return 0; + + return poll_timeout_us(ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL), + ocp_data & BACKUP_RESTRORE, 200, 20000, false); +} + static void r8156_init(struct r8152 *tp) { u32 ocp_data; @@ -8164,14 +8369,14 @@ static void r8156_init(struct r8152 *tp) if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) return; - if (tp->version == RTL_VER_16) { + if (tp->version == RTL_VER_16 || tp->version == RTL_VER_17) { ocp_byte_set_bits(tp, MCU_TYPE_USB, 0xcffe, BIT(3)); ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd3ca, BIT(0)); } ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED); - if (tp->version != RTL_VER_16) + if (tp->version < RTL_VER_16) ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET); @@ -8185,6 +8390,7 @@ static void r8156_init(struct r8152 *tp) case RTL_VER_13: case RTL_VER_15: case RTL_VER_16: + case RTL_VER_17: r8156b_wait_loading_flash(tp); break; default: @@ -8201,6 +8407,12 @@ static void r8156_init(struct r8152 *tp) return; } + if (tp->version == RTL_VER_17 && r8159_wait_backup_restore(tp)) { + rtl_set_inaccessible(tp); + dev_err(&tp->intf->dev, "init failed, backup-restore timed out\n"); + return; + } + data = r8153_phy_status(tp, 0); if (data == PHY_STAT_EXT_INIT) { ocp_reg_clr_bits(tp, 0xa468, BIT(3) | BIT(1)); @@ -8216,7 +8428,7 @@ static void r8156_init(struct r8152 *tp) data = r8153_phy_status(tp, PHY_STAT_LAN_ON); - if (tp->version == RTL_VER_16) + if (tp->version >= RTL_VER_16) r8157_u2p3en(tp, false); else r8153_u2p3en(tp, false); @@ -8227,7 +8439,7 @@ static void r8156_init(struct r8152 *tp) /* U1/U2/L1 idle timer. 500 us */ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); - if (tp->version == RTL_VER_16) + if (tp->version >= RTL_VER_16) r8157_power_cut_en(tp, false); else r8153b_power_cut_en(tp, false); @@ -8260,7 +8472,7 @@ static void r8156_init(struct r8152 *tp) r8156_mac_clk_spd(tp, true); - if (tp->version != RTL_VER_16) + if (tp->version < RTL_VER_16) ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, PLA_MCU_SPDWN_EN); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); @@ -8273,8 +8485,13 @@ static void r8156_init(struct r8152 *tp) set_bit(GREEN_ETHERNET, &tp->flags); - /* rx aggregation / 16 bytes Rx descriptor */ - if (tp->version == RTL_VER_16) + /* RX aggregation / 16 bytes RX descriptor + * BIT(11) is specific to RTL8159, with unknown meaning + */ + if (tp->version == RTL_VER_17) + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, + RX_AGG_DISABLE | RX_DESC_16B | BIT(11)); + else if (tp->version == RTL_VER_16) ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, RX_AGG_DISABLE | RX_DESC_16B); else ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, RX_AGG_DISABLE | RX_ZERO_EN); @@ -8282,7 +8499,7 @@ static void r8156_init(struct r8152 *tp) if (tp->version < RTL_VER_12) ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ACT_ODMA); - if (tp->version == RTL_VER_16) { + if (tp->version >= RTL_VER_16) { /* Disable Rx Zero Len */ rtl_bmu_clr_bits(tp, 0x2300, BIT(3)); /* TX descriptor Signature */ @@ -9670,6 +9887,29 @@ static int rtl_ops_init(struct r8152 *tp) r8157_desc_init(tp); break; + case RTL_VER_17: + tp->eee_en = true; + tp->eee_adv = MDIO_EEE_100TX | MDIO_EEE_1000T | MDIO_EEE_10GT; + tp->eee_adv2 = MDIO_EEE_2_5GT | MDIO_EEE_5GT; + ops->init = r8156_init; + ops->enable = rtl8156_enable; + ops->disable = rtl8153_disable; + ops->up = rtl8156_up; + ops->down = rtl8156_down; + ops->unload = rtl8153_unload; + ops->eee_get = r8153_get_eee; + ops->eee_set = r8152_set_eee; + ops->in_nway = rtl8153_in_nway; + ops->hw_phy_cfg = r8157_hw_phy_cfg; + ops->autosuspend_en = rtl8157_runtime_enable; + ops->change_mtu = rtl8156_change_mtu; + tp->rx_buf_sz = 48 * 1024; + tp->support_2500full = 1; + tp->support_5000full = 1; + tp->support_10000full = 1; + r8157_desc_init(tp); + break; + default: ret = -ENODEV; dev_err(&tp->intf->dev, "Unknown Device\n"); @@ -9823,6 +10063,9 @@ static u8 __rtl_get_hw_ver(struct usb_device *udev) case 0x1030: version = RTL_VER_16; break; + case 0x2020: + version = RTL_VER_17; + break; default: version = RTL_VER_UNKNOWN; dev_info(&udev->dev, "Unknown version 0x%04x\n", ocp_data); @@ -9975,6 +10218,7 @@ static int rtl8152_probe_once(struct usb_interface *intf, case RTL_VER_13: case RTL_VER_15: case RTL_VER_16: + case RTL_VER_17: netdev->max_mtu = size_to_mtu(16 * 1024); break; case RTL_VER_01: @@ -10140,6 +10384,7 @@ static const struct usb_device_id rtl8152_table[] = { { USB_DEVICE(VENDOR_ID_REALTEK, 0x8155) }, { USB_DEVICE(VENDOR_ID_REALTEK, 0x8156) }, { USB_DEVICE(VENDOR_ID_REALTEK, 0x8157) }, + { USB_DEVICE(VENDOR_ID_REALTEK, 0x815a) }, /* Microsoft */ { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab) },