From: Lech Perczak <lech.perczak@gmail.com>
Date: Tue, 4 Feb 2025 20:15:21 +0000 (+0100)
Subject: ath79: TP-link TL-WR1043ND v2/v3: use fixed-link for AR8327 switch connection
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=af64c180b3e460e7fb8e9fa337f890095c3380a4;p=thirdparty%2Fopenwrt.git

ath79: TP-link TL-WR1043ND v2/v3: use fixed-link for AR8327 switch connection

Attaching PHY driver to the switch, while adding LEDs binding causes the
PHY driver to create additional LED instances, handled incorrectly by
the PHY driver, which are non-functional. Use fixed-link to attach the
switch driver, instead of PHY driver, to prevent that.

This has a side effect of not logging switch port up/down events in the kernel
log.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/12487
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
index 49af23bf02b..486b5c5218c 100644
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -143,8 +143,10 @@
 &mdio0 {
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	switch@1f {
+		compatible = "qca,ar8327";
+		reg = <0x1f>;
+
 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 			0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
@@ -166,7 +168,11 @@
 
 	nvmem-cells = <&macaddr_uboot_1fc00 1>;
 	nvmem-cell-names = "mac-address";
-	phy-handle = <&phy0>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
 };
 
 &eth1 {