NTP Configuration File User's Manual

This document describes the configuration file for the NTP Project's ntpd program. -
Short Contents

@@ -50,12 +48,10 @@ Up: (dir)
- -
-Previous: Top, +Previous: Top, Up: Top - +
@@ -65,11 +61,9 @@ Up: Top by default ntp.conf.
- -
- - + +
Notes about ntp.conf

@@ -83,7 +77,7 @@ configuration file is read at initial startup by the daemon in order to specify the synchronization sources, modes and other related information. Usually, it is installed in the -/etc +/etc directory, but could be installed elsewhere (see the daemon's @@ -94,7 +88,7 @@ command line option). unix configuration files. Comments begin with a -‘#’ +# character and extend to the end of the line; blank lines are ignored. Configuration commands consist of an initial keyword @@ -112,7 +106,7 @@ The page (available as part of the HTML documentation provided in -/usr/share/doc/ntp) +/usr/share/doc/ntp) contains an extended discussion of these options. In addition to the discussion of general Configuration Options, @@ -139,10 +133,9 @@ or manycastclient commands.
- - + +
Configuration Support

@@ -183,7 +176,7 @@ or ntpdc(1ntpdcmdoc), IPv6 addresses are automatically generated. IPv6 addresses can be identified by the presence of colons -“:” +: in the address field. IPv6 addresses can be used almost everywhere where IPv4 addresses can be used, @@ -213,7 +206,7 @@ Additional information on association behavior can be found in the page (available as part of the HTML documentation provided in -/usr/share/doc/ntp). +/usr/share/doc/ntp).
pool: For type s addresses, this command mobilizes a persistent client mode association with a number of remote servers. @@ -364,7 +357,7 @@ See the page (available as part of the HTML documentation provided in -/usr/share/doc/ntp) +/usr/share/doc/ntp) for further information.
true: Forces the association to always survive the selection and clustering algorithms. This option should almost certainly @@ -447,10 +440,9 @@ The default value for is 5.
- - + +
Authentication Support

@@ -600,7 +592,7 @@ authenticate NTP packets. Keys and related information are specified in a key file, usually called -ntp.keys, +ntp.keys, which must be distributed and stored using secure means beyond the scope of the NTP protocol itself. Besides the keys used @@ -897,34 +889,34 @@ location of a file is relative to the keys directory specified in the keysdir command or default -/usr/local/etc. +/usr/local/etc. Following are the subcommands:
cert file: Specifies the location of the required host public certificate file. This overrides the link -ntpkey_cert_hostname +ntpkey_cert_hostname in the keys directory.
gqpar file: Specifies the location of the optional GQ parameters file. This overrides the link -ntpkey_gq_hostname +ntpkey_gq_hostname in the keys directory.
host file: Specifies the location of the required host key file. This overrides the link -ntpkey_key_hostname +ntpkey_key_hostname in the keys directory.
iffpar file: Specifies the location of the optional IFF parameters file. This overrides the link -ntpkey_iff_hostname +ntpkey_iff_hostname in the keys directory.
leap file: Specifies the location of the optional leapsecond file. This overrides the link -ntpkey_leap +ntpkey_leap in the keys directory.
mvpar file: Specifies the location of the optional MV parameters file. This overrides the link -ntpkey_mv_hostname +ntpkey_mv_hostname in the keys directory.
pw password: Specifies the password to decrypt files containing private keys and identity parameters. @@ -936,7 +928,7 @@ The defaults are described in the main text above.
sign file: Specifies the location of the optional sign key file. This overrides the link -ntpkey_sign_hostname +ntpkey_sign_hostname in the keys directory. If this file is not found, the host key is also the sign key. @@ -954,7 +946,7 @@ command line option.
keysdir path: This command specifies the default directory path for cryptographic keys, parameters and certificates. The default is -/usr/local/etc/. +/usr/local/etc/.
requestkey key: Specifies the key identifier to use with the ntpdc(1ntpdcmdoc) utility program, which uses a @@ -1032,10 +1024,9 @@ The certificate is missing, corrupted or bogus. The identity key is missing, corrupt or bogus.
- - + +
Monitoring Support

@@ -1051,7 +1042,7 @@ for a listing and example of each type of statistics currently supported. Statistic files are managed using file generation sets and scripts in the -./scripts +./scripts directory of the source code distribution. Using these facilities and @@ -1073,7 +1064,8 @@ Each update received from a clock driver appends a line of the following form to the file generation set named clockstats: -
          49213 525.624 127.127.4.1 93 226 00:08:29.606 D
+          
+          49213 525.624 127.127.4.1 93 226 00:08:29.606 D
      
 
           The first two fields show the date (Modified Julian Day) and time
@@ -1093,7 +1085,8 @@ enables recording of cryptographic public key protocol information.
 Each message received by the protocol module appends a line of the
 following form to the file generation set named
 cryptostats:
-
          49213 525.624 127.127.4.1 message
+          
+          49213 525.624 127.127.4.1 message
      
 
           The first two fields show the date (Modified Julian Day) and time
@@ -1109,7 +1102,8 @@ Each
 update of the local clock outputs a line of the following form to
 the file generation set named
 loopstats:
-
          50935 75440.031 0.000006019 13.778190 0.000351733 0.0133806
+          
+          50935 75440.031 0.000006019 13.778190 0.000351733 0.0133806
      
 
           The first two fields show the date (Modified Julian Day) and
@@ -1126,7 +1120,8 @@ Each valid update appends a
 line of the following form to the current element of a file
 generation set named
 peerstats:
-
          48773 10847.650 127.127.4.1 9714 -0.001605376 0.000000000 0.001424877 0.000958674
+          
+          48773 10847.650 127.127.4.1 9714 -0.001605376 0.000000000 0.001424877 0.000958674
      
 
           The first two fields show the date (Modified Julian Day) and
@@ -1146,7 +1141,8 @@ Each NTP message
 received from a peer or clock driver appends a line of the
 following form to the file generation set named
 rawstats:
-
          50928 2132.543 128.4.1.1 128.4.1.20 3102453281.584327000 3102453281.58622800031 02453332.540806000 3102453332.541458000
+          
+          50928 2132.543 128.4.1.1 128.4.1.20 3102453281.584327000 3102453281.58622800031 02453332.540806000 3102453332.541458000
      
 
           The first two fields show the date (Modified Julian Day) and
@@ -1164,7 +1160,8 @@ Each
 hour a line of the following form is appended to the file generation
 set named
 sysstats:
-
          50928 2132.543 36000 81965 0 9546 56 71793 512 540 10 147
+          
+          50928 2132.543 36000 81965 0 9546 56 71793 512 540 10 147
      
 
           The first two fields show the date (Modified Julian Day) and time
@@ -1242,13 +1239,13 @@ generation can be configured using the
 option explained above. 
 
filename
This string is directly concatenated to the prefix mentioned
 above (no intervening
-‘/’). 
+/). 
 This can be modified using
 the file argument to the
 filegen
 statement. 
 No
-..
+..
 elements are
 allowed in this component to prevent filenames referring to
 parts outside the filesystem hierarchy denoted by
@@ -1270,7 +1267,7 @@ separating files belonging to different
 ntpd(1ntpdmdoc)
 server incarnations. 
 The set member filename is built by appending a
-‘.’
+. 
 to concatenated
 prefix
 and
@@ -1284,7 +1281,7 @@ A day is
 defined as the period between 00:00 and 24:00 UTC. 
 The file set
 member suffix consists of a
-‘.’
+. 
 and a day specification in
 the form
 YYYYMMdd. 
@@ -1356,10 +1353,9 @@ allows the current file to be accessed by a constant name.
           
      
 
-
 

-
-
+
+

 
 
 Access Control Support
@@ -1381,7 +1377,7 @@ Additional information and examples can be found in the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp).
+/usr/share/doc/ntp).
 
   The restriction facility was implemented in conformance
 with the access policies for the original NSFnet backbone
@@ -1553,7 +1549,7 @@ be overridden by later requests for normal priority traps.
 even if they come from an authenticated source. 
 Note that the ability to use a symmetric key for authentication may be restricted to
 one or more IPs or subnets via the third field of the
-ntp.keys
+ntp.keys
 file. 
 This restriction is not enabled by default,
 to maintain backward compatability. 
@@ -1631,10 +1627,9 @@ with the default entry (i.e., everything besides your own
 NTP server is unrestricted). 
 
 

-
 

-
-
+
+

 
 
 Automatic NTP Configuration Options
@@ -1965,7 +1960,7 @@ there is clear benefit to having the clients notice this change
 as soon as possible. 
 Attacks such as replay attacks can happen, however,
 and even though there are a number of protections built in to
-broadcast mode, attempts to perform  a replay attack are possible. 
+broadcast mode, attempts to perform a replay attack are possible. 
 This value defaults to 0, but can be changed
 to any number of poll intervals between 0 and 4. 
 
@@ -2030,10 +2025,9 @@ The default is eight
 multiples of 32 starting at 31. 
 
 
-
 

-
-
+
+

 
 
 Reference Clock Support
@@ -2047,7 +2041,7 @@ be found in the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp). 
+/usr/share/doc/ntp). 
 Additional information can be found in the pages linked
 there, including the
 "Debugging Hints for Reference Clock Drivers"
@@ -2056,14 +2050,14 @@ and
 pages
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp). 
+/usr/share/doc/ntp). 
 In addition, support for a PPS
 signal is available as described in the
 "Pulse-per-second (PPS) Signal Interfacing"
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp). 
+/usr/share/doc/ntp). 
 Many
 drivers support special line discipline/streams modules which can
 significantly improve the accuracy using the driver. 
@@ -2073,7 +2067,7 @@ described in the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp).
+/usr/share/doc/ntp).
 
   A reference clock will generally (though not always) be a radio
 timecode receiver which is synchronized to a source of standard
@@ -2139,7 +2133,7 @@ information on this option can be found in the
 "Mitigation Rules and the prefer Keyword"
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp)
+/usr/share/doc/ntp)
 page. 
 The
 minpoll
@@ -2209,7 +2203,7 @@ See the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp)
+/usr/share/doc/ntp)
 for further information. 
 
mode int
Specifies a mode number which is interpreted in a
 device-specific fashion. 
@@ -2271,7 +2265,7 @@ page and operates as described in the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp). 
+/usr/share/doc/ntp). 
 
time2 secs
Specifies a fixed-point decimal number in seconds, which is
 interpreted in a driver-dependent way. 
 See the descriptions of
@@ -2280,7 +2274,7 @@ specific drivers in the
 page
 (available as part of the HTML documentation
 provided in
-/usr/share/doc/ntp ).
+/usr/share/doc/ntp ).
 
stratum int
Specifies the stratum number assigned to the driver, an integer
 between 0 and 15. 
 This number overrides the default stratum number
@@ -2316,10 +2310,9 @@ command can be found in
 
      
 
-
 

-
-
+
+

 
 
 Miscellaneous Options
@@ -2527,14 +2520,14 @@ restriction list).
 directive controls which network addresses
 ntpd(1ntpdmdoc)
 opens, and whether input is dropped without processing. 
-The first parameter determines the aciton  for addresses
+The first parameter determines the action for addresses
 which match the second parameter. 
 The second parameter specifies a class of addresses,
 or a specific interface name,
 or an address. 
 In the address case,
 prefixlen
-determines how many bits must match  for this rule to apply. 
+determines how many bits must match for this rule to apply. 
 ignore
 prevents opening matching addresses,
 drop
@@ -2605,18 +2598,18 @@ By default, all output is turned on.
 All
 configkeyword
 keywords can be prefixed with
-‘=’,
-‘+’
+=,
++
 and
-‘-’,
+-,
 where
-‘=’
+=
 sets the
 syslog(3)
 priority mask,
-‘+’
++
 adds and
-‘-’
+-
 removes
 messages. 
 syslog(3)
@@ -2646,7 +2639,8 @@ keyword to enable/disable all
 messages of the respective message class. 
 Thus, a minimal log configuration
 could look like this:
-     logconfig =syncstatus +sysevents
+     
+     logconfig =syncstatus +sysevents
 
 
      This would just list the synchronizations state of
@@ -2654,7 +2648,8 @@ could look like this:
 and the major system events. 
 For a simple reference server, the
 following minimum message configuration could be useful:
-
     logconfig =syncall +clockall
+     
+     logconfig =syncall +clockall
 
 
      This configuration will list all clock information and
@@ -2945,28 +2940,24 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 

-
-
 

-
-
+
+

 
 
 ntp.conf Files
 
      
-/etc/ntp.conf
the default name of the configuration file
-
ntp.keys
private MD5 keys
-
ntpkey
RSA private key
-
ntpkey_host
RSA public key
-
ntp_dh
Diffie-Hellman agreement parameters
+
/etc/ntp.conf
the default name of the configuration file
+
ntp.keys
private MD5 keys
+
ntpkey
RSA private key
+
ntpkey_host
RSA public key
+
ntp_dh
Diffie-Hellman agreement parameters
 
 
-
-
 

-
-
+
+

 
 
 ntp.conf See Also
@@ -2980,17 +2971,15 @@ comprehensive documentation is available on the world wide web
 at
 http://www.ntp.org/. 
 A snapshot of this documentation is available in HTML format in
-/usr/share/doc/ntp. 
+/usr/share/doc/ntp. 
 

 
   

 David L. Mills, Network Time Protocol (Version 4), RFC5905
 

-
-
 

-
-
+
+

 
 
 ntp.conf Bugs
@@ -3000,17 +2989,15 @@ ridiculous and even hilarious options and modes may not be
 detected.
 
   The
-ntpkey_host
+ntpkey_host
 files are really digital
 certificates. 
 These should be obtained via secure directory
 services when they become universally available. 
 

-
-
 

-
-
+
+

 
 
 ntp.conf Notes
diff --git a/ntpd/ntp.conf.man.in b/ntpd/ntp.conf.man.in
index e92e29d77..0f2b21191 100644
--- a/ntpd/ntp.conf.man.in
+++ b/ntpd/ntp.conf.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntp.conf 5 "27 Feb 2018" "4.2.8p10" "File Formats"
+.TH ntp.conf 5 "27 Feb 2018" "4.2.8p11" "File Formats"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-LkaqTP/ag-XkaiSP)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:25:55 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:14:22 PM by AutoGen 5.18.5
 .\" From the definitions ntp.conf.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpd/ntp.conf.mdoc.in b/ntpd/ntp.conf.mdoc.in
index 5a1ee9496..321acc99d 100644
--- a/ntpd/ntp.conf.mdoc.in
+++ b/ntpd/ntp.conf.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntp.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:45 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:42 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp.conf.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpd/ntp.keys.5man b/ntpd/ntp.keys.5man
index 758e1bb7b..b107e02ea 100644
--- a/ntpd/ntp.keys.5man
+++ b/ntpd/ntp.keys.5man
@@ -1,8 +1,8 @@
-.TH ntp.keys 5man "27 Feb 2018" "4.2.8p10" "File Formats"
+.TH ntp.keys 5man "27 Feb 2018" "4.2.8p11" "File Formats"
 .\"
 .\"  EDIT THIS FILE WITH CAUTION  (ntp.man)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:57 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:26 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp.keys.def
 .\"  and the template file   agman-file.tpl
 .Sh NAME
diff --git a/ntpd/ntp.keys.5mdoc b/ntpd/ntp.keys.5mdoc
index 10b45744c..bec3980fc 100644
--- a/ntpd/ntp.keys.5mdoc
+++ b/ntpd/ntp.keys.5mdoc
@@ -1,9 +1,9 @@
 .Dd February 27 2018
 .Dt NTP_KEYS 5mdoc File Formats
-.Os Linux 3.2.0-4-686-pae
+.Os SunOS 5.10
 .\"  EDIT THIS FILE WITH CAUTION  (ntp.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:48 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:46 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp.keys.def
 .\"  and the template file   agmdoc-file.tpl
 .Sh NAME
diff --git a/ntpd/ntp.keys.html b/ntpd/ntp.keys.html
index f063276fa..28a4076aa 100644
--- a/ntpd/ntp.keys.html
+++ b/ntpd/ntp.keys.html
@@ -3,7 +3,7 @@
 NTP Symmetric Key
 
 
-
+
 
 
 
@@ -14,20 +14,18 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 NTP Symmetric Key
 
-
 

-Next: ntp.keys Description,
+Next: ntp.keys Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 NTP's Symmetric Key File User Manual
@@ -35,7 +33,7 @@ Up: (dir)
 This document describes the symmetric key file for the NTP Project's
 ntpd program.
 
-  
This document applies to version 4.2.8p10 of ntp.keys.
+  
This document applies to version 4.2.8p11 of ntp.keys.
 
   

 Short Contents
@@ -50,12 +48,10 @@ Up: (dir)
 
 
 
-
-
 

-Previous: Top,
+Previous: Top,
 Up: Top
-
+

 
 
 
@@ -65,11 +61,9 @@ Up: Top
 be specified in a configuration file, by default /etc/ntp.keys.
 
 
-
-
 

-
-
+
+

 
 
 Notes about ntp.keys
@@ -181,27 +175,23 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
-
 

-Next: ntp.keys See Also,
+Next: ntp.keys See Also,
 Up: ntp.keys Notes
-
+

 
 
 ntp.keys Files
 
      
-/etc/ntp.keys
the default name of the configuration file
+
/etc/ntp.keys
the default name of the configuration file
 
 
-
-
 

-Next: ntp.keys Notes,
+Next: ntp.keys Notes,
 Previous: ntp.keys Files,
 Up: ntp.keys Notes
-
+

 
 
 ntp.keys See Also
@@ -212,12 +202,10 @@ Up: ntp.keys Notes
 ntpdc(1ntpdcmdoc),
 sntp(1sntpmdoc)
 
-
-
 

-Previous: ntp.keys See Also,
+Previous: ntp.keys See Also,
 Up: ntp.keys Notes
-
+

 
 
 ntp.keys Notes
diff --git a/ntpd/ntp.keys.man.in b/ntpd/ntp.keys.man.in
index 5d40ed019..3712747d4 100644
--- a/ntpd/ntp.keys.man.in
+++ b/ntpd/ntp.keys.man.in
@@ -1,8 +1,8 @@
-.TH ntp.keys 5 "27 Feb 2018" "4.2.8p10" "File Formats"
+.TH ntp.keys 5 "27 Feb 2018" "4.2.8p11" "File Formats"
 .\"
 .\"  EDIT THIS FILE WITH CAUTION  (ntp.man)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:57 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:26 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp.keys.def
 .\"  and the template file   agman-file.tpl
 .Sh NAME
diff --git a/ntpd/ntp.keys.mdoc.in b/ntpd/ntp.keys.mdoc.in
index 3ba24eff8..6dc4f88c4 100644
--- a/ntpd/ntp.keys.mdoc.in
+++ b/ntpd/ntp.keys.mdoc.in
@@ -1,9 +1,9 @@
 .Dd February 27 2018
 .Dt NTP_KEYS 5 File Formats
-.Os Linux 3.2.0-4-686-pae
+.Os SunOS 5.10
 .\"  EDIT THIS FILE WITH CAUTION  (ntp.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:48 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:46 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp.keys.def
 .\"  and the template file   agmdoc-file.tpl
 .Sh NAME
diff --git a/ntpd/ntpd-opts.c b/ntpd/ntpd-opts.c
index 8f39c8b7d..47b080872 100644
--- a/ntpd/ntpd-opts.c
+++ b/ntpd/ntpd-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpd-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:25:08 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:13:19 PM by AutoGen 5.18.5
  *  From the definitions    ntpd-opts.def
  *  and the template file   options
  *
@@ -75,7 +75,7 @@ extern FILE * option_usage_fp;
  *  static const strings for ntpd options
  */
 static char const ntpd_opt_strs[3132] =
-/*     0 */ "ntpd 4.2.8p10\n"
+/*     0 */ "ntpd 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -205,12 +205,12 @@ static char const ntpd_opt_strs[3132] =
 /*  2901 */ "output version information and exit\0"
 /*  2937 */ "version\0"
 /*  2945 */ "NTPD\0"
-/*  2950 */ "ntpd - NTP daemon program - Ver. 4.2.8p10\n"
+/*  2950 */ "ntpd - NTP daemon program - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]... \\\n"
             "\t\t[  ...  ]\n\0"
 /*  3082 */ "http://bugs.ntp.org, bugs@ntp.org\0"
 /*  3116 */ "\n\0"
-/*  3118 */ "ntpd 4.2.8p10";
+/*  3118 */ "ntpd 4.2.8p11";
 
 /**
  *  ipv4 option description with
@@ -1529,7 +1529,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via ntpdOptions.pzCopyright */
-  puts(_("ntpd 4.2.8p10\n\
+  puts(_("ntpd 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -1670,7 +1670,7 @@ implied warranty.\n"));
   puts(_("output version information and exit"));
 
   /* referenced via ntpdOptions.pzUsageTitle */
-  puts(_("ntpd - NTP daemon program - Ver. 4.2.8p10\n\
+  puts(_("ntpd - NTP daemon program - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]... \\\n\
 \t\t[  ...  ]\n"));
 
@@ -1678,7 +1678,7 @@ Usage:  %s [ - [] | --[{=| }] ]... \\\n\
   puts(_("\n"));
 
   /* referenced via ntpdOptions.pzFullVersion */
-  puts(_("ntpd 4.2.8p10"));
+  puts(_("ntpd 4.2.8p11"));
 
   /* referenced via ntpdOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/ntpd/ntpd-opts.h b/ntpd/ntpd-opts.h
index 996a1629b..3372d4d8e 100644
--- a/ntpd/ntpd-opts.h
+++ b/ntpd/ntpd-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpd-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:25:08 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:13:17 PM by AutoGen 5.18.5
  *  From the definitions    ntpd-opts.def
  *  and the template file   options
  *
@@ -106,9 +106,9 @@ typedef enum {
 /** count of all options for ntpd */
 #define OPTION_CT    38
 /** ntpd version */
-#define NTPD_VERSION       "4.2.8p10"
+#define NTPD_VERSION       "4.2.8p11"
 /** Full ntpd version text */
-#define NTPD_FULL_VERSION  "ntpd 4.2.8p10"
+#define NTPD_FULL_VERSION  "ntpd 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/ntpd/ntpd.1ntpdman b/ntpd/ntpd.1ntpdman
index 5d05e4e5c..ec02e0c17 100644
--- a/ntpd/ntpd.1ntpdman
+++ b/ntpd/ntpd.1ntpdman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpd 1ntpdman "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpd 1ntpdman "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Ffa4WQ/ag-RfaWVQ)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:25:58 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:14:30 PM by AutoGen 5.18.5
 .\" From the definitions ntpd-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpd/ntpd.1ntpdmdoc b/ntpd/ntpd.1ntpdmdoc
index bbfcae531..339d2cff0 100644
--- a/ntpd/ntpd.1ntpdmdoc
+++ b/ntpd/ntpd.1ntpdmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpd-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:49 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:47 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpd-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpd/ntpd.html b/ntpd/ntpd.html
index 676a758bd..3af0cc546 100644
--- a/ntpd/ntpd.html
+++ b/ntpd/ntpd.html
@@ -3,7 +3,7 @@
 ntpd: Network Time Protocol (NTP) Daemon User's Manual
 
 
-
+
 
 
 
@@ -14,20 +14,18 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 ntpd: Network Time Protocol (NTP) Daemon User's Manual
 
-
 

-Next: ntpd Description,
+Next: ntpd Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 ntpd: Network Time Protocol (NTP) Daemon User Manual
@@ -41,7 +39,7 @@ The program can operate in any of several modes, including client/server,
 symmetric and broadcast modes, and with both symmetric-key and public-key
 cryptography.
 
-  This document applies to version 4.2.8p10 of ntpd.
+  
This document applies to version 4.2.8p11 of ntpd.
 
 

 ntpd Description:             Description
@@ -50,10 +48,9 @@ cryptography.
 
 
 
-
 

-
-
+
+

 
 
 
@@ -81,10 +78,9 @@ If nothing is heard after a few minutes' time,
 the daemon times out and exits without setting the clock.
 
 
-
 

-
-
+
+

 
 
 Invoking ntpd
@@ -165,7 +161,7 @@ using the agtexi-cmd template and the option descriptions for the <
 This software is released under the NTP license, <http://ntp.org/license>.
 
 
-ntpd usage:                   ntpd help/usage (--help)
+
ntpd usage:                   ntpd help/usage (--help)
 
ntpd ipv4:                    ipv4 option (-4)
 
ntpd ipv6:                    ipv6 option (-6)
 
ntpd authreq:                 authreq option (-a)
@@ -205,24 +201,23 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
 

-Next: ntpd ipv4,
+Next: ntpd ipv4,
 Up: ntpd Invocation
-
+

 
 
-ntpd help/usage (--help)
+ntpd help/usage (--help)
 
 
 This is the automatically generated usage text for ntpd.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
 
ntpd - NTP daemon program - Ver. 4.2.8p10
@@ -296,12 +291,11 @@ The following option preset mechanisms are supported:
 Please send bug reports to:  <http://bugs.ntp.org, bugs@ntp.org>
 
   
-
 

-Next: ntpd ipv6,
+Next: ntpd ipv6,
 Previous: ntpd usage,
 Up: ntpd Invocation
-
+

 
 
 ipv4 option (-4)
@@ -318,12 +312,11 @@ ipv6.
   Force DNS resolution of following host names on the command line
 to the IPv4 namespace. 
 

-
 

-Next: ntpd authreq,
+Next: ntpd authreq,
 Previous: ntpd ipv4,
 Up: ntpd Invocation
-
+

 
 
 ipv6 option (-6)
@@ -340,12 +333,11 @@ ipv4.
   Force DNS resolution of following host names on the command line
 to the IPv6 namespace. 
 

-
 

-Next: ntpd authnoreq,
+Next: ntpd authnoreq,
 Previous: ntpd ipv6,
 Up: ntpd Invocation
-
+

 
 
 authreq option (-a)
@@ -363,12 +355,11 @@ authnoreq.
 multicast client and symmetric passive associations. 
 This is the default. 
 
-
 

-Next: ntpd configfile,
+Next: ntpd configfile,
 Previous: ntpd authreq,
 Up: ntpd Invocation
-
+

 
 
 authnoreq option (-A)
@@ -386,12 +377,11 @@ authreq.
 multicast client and symmetric passive associations. 
 This is almost never a good idea. 
 
-
 

-Next: ntpd driftfile,
+Next: ntpd driftfile,
 Previous: ntpd authnoreq,
 Up: ntpd Invocation
-
+

 
 
 configfile option (-c)
@@ -400,15 +390,14 @@ Up: ntpd Invocation
 This is the “configuration file name” option. 
 This option takes a string argument. 
 The name and path of the configuration file,
-/etc/ntp.conf
+/etc/ntp.conf
 by default. 
 
-
 

-Next: ntpd panicgate,
+Next: ntpd panicgate,
 Previous: ntpd configfile,
 Up: ntpd Invocation
-
+

 
 
 driftfile option (-f)
@@ -417,20 +406,19 @@ Up: ntpd Invocation
 This is the “frequency drift file name” option. 
 This option takes a string argument. 
 The name and path of the frequency file,
-/etc/ntp.drift
+/etc/ntp.drift
 by default. 
 This is the same operation as the
 driftfile driftfile
 configuration specification in the
-/etc/ntp.conf
+/etc/ntp.conf
 file. 
 
-
 

-Next: ntpd force-step-once,
+Next: ntpd force-step-once,
 Previous: ntpd driftfile,
 Up: ntpd Invocation
-
+

 
 
 panicgate option (-g)
@@ -456,13 +444,11 @@ See the
 tinker
 configuration file directive for other options. 
 
-
-
 

-Next: ntpd jaildir,
+Next: ntpd jaildir,
 Previous: ntpd panicgate,
 Up: ntpd Invocation
-
+

 
 
 force-step-once option (-G)
@@ -480,12 +466,11 @@ so this option must not be used if
 applications requiring monotonic time are running. 
 See the tinker configuration file directive for other options. 
 
-
 

-Next: ntpd interface,
+Next: ntpd interface,
 Previous: ntpd force-step-once,
 Up: ntpd Invocation
-
+

 
 
 jaildir option (-i)
@@ -512,19 +497,18 @@ This option is supported under NetBSD (configure with
 --enable-clockctl) or Linux (configure with
 --enable-linuxcaps) or Solaris (configure with --enable-solarisprivs). 
 
-
 

-Next: ntpd keyfile,
+Next: ntpd keyfile,
 Previous: ntpd jaildir,
 Up: ntpd Invocation
-
+

 
 
 interface option (-I)
 
 
 This is the “listen on an interface name or address” option. 
-This option takes a string argument iface.
+This option takes a string argument iface.
 
 
This option has some usage constraints.  It:
      

@@ -537,12 +521,11 @@ also implies not opening other addresses, except wildcard and localhost.
 This option is deprecated. Please consider using the configuration file
 interface command, which is more versatile. 
 
-
 

-Next: ntpd logfile,
+Next: ntpd logfile,
 Previous: ntpd interface,
 Up: ntpd Invocation
-
+

 
 
 keyfile option (-k)
@@ -551,18 +534,17 @@ Up: ntpd Invocation
 This is the “path to symmetric keys” option. 
 This option takes a string argument. 
 Specify the name and path of the symmetric key file. 
-/etc/ntp.keys
+/etc/ntp.keys
 is the default. 
 This is the same operation as the
 keys keyfile
 configuration file directive. 
 
-
 

-Next: ntpd novirtualips,
+Next: ntpd novirtualips,
 Previous: ntpd keyfile,
 Up: ntpd Invocation
-
+

 
 
 logfile option (-l)
@@ -576,12 +558,11 @@ This is the same operation as the
 logfile logfile
 configuration file directive. 
 
-
 

-Next: ntpd modifymmtimer,
+Next: ntpd modifymmtimer,
 Previous: ntpd logfile,
 Up: ntpd Invocation
-
+

 
 
 novirtualips option (-L)
@@ -593,12 +574,11 @@ names containing a colon.  This option is deprecated.  Please
 consider using the configuration file interface command, which
 is more versatile. 
 
-
 

-Next: ntpd nice,
+Next: ntpd nice,
 Previous: ntpd novirtualips,
 Up: ntpd Invocation
-
+

 
 
 modifymmtimer option (-M)
@@ -615,12 +595,11 @@ This is the “modify multimedia timer (windows only)” option.
 ensures the resolution does not change while ntpd is running,
 avoiding timekeeping glitches associated with changes. 
 
-
 

-Next: ntpd pidfile,
+Next: ntpd pidfile,
 Previous: ntpd modifymmtimer,
 Up: ntpd Invocation
-
+

 
 
 nice option (-N)
@@ -631,12 +610,11 @@ To the extent permitted by the operating system, run
 ntpd
 at the highest priority. 
 
-
 

-Next: ntpd priority,
+Next: ntpd priority,
 Previous: ntpd nice,
 Up: ntpd Invocation
-
+

 
 
 pidfile option (-p)
@@ -651,12 +629,11 @@ This is the same operation as the
 pidfile pidfile
 configuration file directive. 
 
-
 

-Next: ntpd quit,
+Next: ntpd quit,
 Previous: ntpd pidfile,
 Up: ntpd Invocation
-
+

 
 
 priority option (-P)
@@ -670,12 +647,11 @@ at the specified
 sched_setscheduler(SCHED_FIFO)
 priority. 
 
-
 

-Next: ntpd propagationdelay,
+Next: ntpd propagationdelay,
 Previous: ntpd priority,
 Up: ntpd Invocation
-
+

 
 
 quit option (-q)
@@ -701,12 +677,11 @@ and
 options can be used with this option. 
 Note: The kernel time discipline is disabled with this option. 
 
-
 

-Next: ntpd saveconfigquit,
+Next: ntpd saveconfigquit,
 Previous: ntpd quit,
 Up: ntpd Invocation
-
+

 
 
 propagationdelay option (-r)
@@ -716,12 +691,11 @@ This is the “broadcast/propagation delay” option.
 This option takes a string argument. 
 Specify the default propagation delay from the broadcast/multicast server to this client. This is necessary only if the delay cannot be computed automatically by the protocol. 
 
-
 

-Next: ntpd statsdir,
+Next: ntpd statsdir,
 Previous: ntpd propagationdelay,
 Up: ntpd Invocation
-
+

 
 
 saveconfigquit option
@@ -741,12 +715,11 @@ quit, wait-sync.
 equivalent to the given filename and exit.  This option was
 designed for automated testing. 
 
-
 

-Next: ntpd trustedkey,
+Next: ntpd trustedkey,
 Previous: ntpd saveconfigquit,
 Up: ntpd Invocation
-
+

 
 
 statsdir option (-s)
@@ -759,19 +732,18 @@ This is the same operation as the
 statsdir statsdir
 configuration file directive. 
 
-
 

-Next: ntpd user,
+Next: ntpd user,
 Previous: ntpd statsdir,
 Up: ntpd Invocation
-
+

 
 
 trustedkey option (-t)
 
 
 This is the “trusted key number” option. 
-This option takes a string argument tkey.
+This option takes a string argument tkey.
 
 
This option has some usage constraints.  It:
      

@@ -780,12 +752,11 @@ This option takes a string argument tkey.
 
   Add the specified key number to the trusted key list. 
 

-
 

-Next: ntpd updateinterval,
+Next: ntpd updateinterval,
 Previous: ntpd trustedkey,
 Up: ntpd Invocation
-
+

 
 
 user option (-u)
@@ -806,12 +777,11 @@ This option is supported under NetBSD (configure with
 --enable-clockctl) or Linux (configure with
 --enable-linuxcaps) or Solaris (configure with --enable-solarisprivs). 
 
-
 

-Next: ntpd wait-sync,
+Next: ntpd wait-sync,
 Previous: ntpd user,
 Up: ntpd Invocation
-
+

 
 
 updateinterval option (-U)
@@ -824,13 +794,11 @@ For systems with routing socket support the scans will be performed shortly afte
 has been detected by the system. 
 Use 0 to disable scanning. 60 seconds is the minimum time between scans. 
 
-
-
 

-Next: ntpd slew,
+Next: ntpd slew,
 Previous: ntpd updateinterval,
 Up: ntpd Invocation
-
+

 
 
 wait-sync option (-w)
@@ -855,12 +823,11 @@ otherwise it is ETIMEDOUT.
 This provides the option for a script starting ntpd to easily
 wait for the first set of the clock before proceeding. 
 
-
 

-Next: ntpd usepcc,
+Next: ntpd usepcc,
 Previous: ntpd wait-sync,
 Up: ntpd Invocation
-
+

 
 
 slew option (-x)
@@ -881,12 +848,11 @@ See the
 configuration file directive for other options. 
 Note: The kernel time discipline is disabled with this option. 
 
-
 

-Next: ntpd pccfreq,
+Next: ntpd pccfreq,
 Previous: ntpd slew,
 Up: ntpd Invocation
-
+

 
 
 usepcc option
@@ -904,12 +870,11 @@ The CPU counter and QueryPerformanceCounter are compared, and if
 they have the same frequency, the CPU counter (RDTSC on x86) is
 used directly, saving the overhead of a system call. 
 
-
 

-Next: ntpd mdns,
+Next: ntpd mdns,
 Previous: ntpd usepcc,
 Up: ntpd Invocation
-
+

 
 
 pccfreq option
@@ -927,12 +892,11 @@ This option takes a string argument.
 The CPU counter (RDTSC on x86) is used unconditionally with the
 given frequency (in Hz). 
 
-
 

-Next: ntpd config,
+Next: ntpd config,
 Previous: ntpd pccfreq,
 Up: ntpd Invocation
-
+

 
 
 mdns option (-m)
@@ -949,12 +913,11 @@ This is the “register with mdns as a ntp server” option.
 the server to be discovered via mDNS client lookup.
 
 
-
 

-Next: ntpd exit status,
+Next: ntpd exit status,
 Previous: ntpd mdns,
 Up: ntpd Invocation
-
+

 
 
 presetting/configuring ntpd
@@ -976,86 +939,79 @@ detail to provide.  The default is to print just the version.  The licensing inf
 Only the first letter of the argument is examined:
 
      
-‘version’
Only print the version.  This is the default. 
-
‘copyright’
Name the copyright usage licensing terms. 
-
‘verbose’
Print the full copyright usage licensing terms. 
+
version
Only print the version.  This is the default. 
+
copyright
Name the copyright usage licensing terms. 
+
verbose
Print the full copyright usage licensing terms. 
 
 
 
-
 

-Next: ntpd Usage,
+Next: ntpd Usage,
 Previous: ntpd config,
 Up: ntpd Invocation
-
+

 
 
 ntpd exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
   
-
 

-Next: ntpd Files,
+Next: ntpd Files,
 Previous: ntpd exit status,
 Up: ntpd Invocation
-
+

 
 
 ntpd Usage
 
 
-
 

-Next: ntpd See Also,
+Next: ntpd See Also,
 Previous: ntpd Usage,
 Up: ntpd Invocation
-
+

 
 
 ntpd Files
 
 
-
 

-Next: ntpd Bugs,
+Next: ntpd Bugs,
 Previous: ntpd Files,
 Up: ntpd Invocation
-
+

 
 
 ntpd See Also
 
 
-
 

-Next: ntpd Notes,
+Next: ntpd Notes,
 Previous: ntpd See Also,
 Up: ntpd Invocation
-
+

 
 
 ntpd Bugs
 
 
-
 

-Previous: ntpd Bugs,
+Previous: ntpd Bugs,
 Up: ntpd Invocation
-
+

 
 
 ntpd Notes
 
 
-
 

-
-
+
+

 
 
 
diff --git a/ntpd/ntpd.man.in b/ntpd/ntpd.man.in
index 2cdf7c4a8..d3f94c654 100644
--- a/ntpd/ntpd.man.in
+++ b/ntpd/ntpd.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpd @NTPD_MS@ "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpd @NTPD_MS@ "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-Ffa4WQ/ag-RfaWVQ)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:25:58 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:14:30 PM by AutoGen 5.18.5
 .\" From the definitions ntpd-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpd/ntpd.mdoc.in b/ntpd/ntpd.mdoc.in
index 082204a6e..53b1f4176 100644
--- a/ntpd/ntpd.mdoc.in
+++ b/ntpd/ntpd.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpd-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:25:49 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:14:47 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpd-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpdc/invoke-ntpdc.texi b/ntpdc/invoke-ntpdc.texi
index dc1fd6907..94e4230ae 100644
--- a/ntpdc/invoke-ntpdc.texi
+++ b/ntpdc/invoke-ntpdc.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntpdc.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:26:10 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 05:15:06 PM by AutoGen 5.18.5
 # From the definitions    ntpdc-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -76,7 +76,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p10
+ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p11
 Usage:  ntpdc [ - [] | --[@{=| @}] ]... [ host ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 DNS name resolution
diff --git a/ntpdc/ntpdc-opts.c b/ntpdc/ntpdc-opts.c
index e67aa6edf..4b7c102a3 100644
--- a/ntpdc/ntpdc-opts.c
+++ b/ntpdc/ntpdc-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpdc-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:03 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:14:56 PM by AutoGen 5.18.5
  *  From the definitions    ntpdc-opts.def
  *  and the template file   options
  *
@@ -69,7 +69,7 @@ extern FILE * option_usage_fp;
  *  static const strings for ntpdc options
  */
 static char const ntpdc_opt_strs[1914] =
-/*     0 */ "ntpdc 4.2.8p10\n"
+/*     0 */ "ntpdc 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -128,14 +128,14 @@ static char const ntpdc_opt_strs[1914] =
 /*  1695 */ "no-load-opts\0"
 /*  1708 */ "no\0"
 /*  1711 */ "NTPDC\0"
-/*  1717 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p10\n"
+/*  1717 */ "ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]... [ host ...]\n\0"
 /*  1848 */ "$HOME\0"
 /*  1854 */ ".\0"
 /*  1856 */ ".ntprc\0"
 /*  1863 */ "http://bugs.ntp.org, bugs@ntp.org\0"
 /*  1897 */ "\n\0"
-/*  1899 */ "ntpdc 4.2.8p10";
+/*  1899 */ "ntpdc 4.2.8p11";
 
 /**
  *  ipv4 option description with
@@ -796,7 +796,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via ntpdcOptions.pzCopyright */
-  puts(_("ntpdc 4.2.8p10\n\
+  puts(_("ntpdc 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -862,14 +862,14 @@ implied warranty.\n"));
   puts(_("load options from a config file"));
 
   /* referenced via ntpdcOptions.pzUsageTitle */
-  puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p10\n\
+  puts(_("ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]... [ host ...]\n"));
 
   /* referenced via ntpdcOptions.pzExplain */
   puts(_("\n"));
 
   /* referenced via ntpdcOptions.pzFullVersion */
-  puts(_("ntpdc 4.2.8p10"));
+  puts(_("ntpdc 4.2.8p11"));
 
   /* referenced via ntpdcOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/ntpdc/ntpdc-opts.h b/ntpdc/ntpdc-opts.h
index cda6d8596..f0c49781f 100644
--- a/ntpdc/ntpdc-opts.h
+++ b/ntpdc/ntpdc-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpdc-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:03 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:14:56 PM by AutoGen 5.18.5
  *  From the definitions    ntpdc-opts.def
  *  and the template file   options
  *
@@ -83,9 +83,9 @@ typedef enum {
 /** count of all options for ntpdc */
 #define OPTION_CT    15
 /** ntpdc version */
-#define NTPDC_VERSION       "4.2.8p10"
+#define NTPDC_VERSION       "4.2.8p11"
 /** Full ntpdc version text */
-#define NTPDC_FULL_VERSION  "ntpdc 4.2.8p10"
+#define NTPDC_FULL_VERSION  "ntpdc 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/ntpdc/ntpdc.1ntpdcman b/ntpdc/ntpdc.1ntpdcman
index 56c101994..6e19ef6fd 100644
--- a/ntpdc/ntpdc.1ntpdcman
+++ b/ntpdc/ntpdc.1ntpdcman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpdc 1ntpdcman "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpdc 1ntpdcman "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-MnaqKS/ag-YnaiJS)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:11 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:03 PM by AutoGen 5.18.5
 .\" From the definitions ntpdc-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpdc/ntpdc.1ntpdcmdoc b/ntpdc/ntpdc.1ntpdcmdoc
index 6908c855b..9b3858290 100644
--- a/ntpdc/ntpdc.1ntpdcmdoc
+++ b/ntpdc/ntpdc.1ntpdcmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpdc-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:08 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:09 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpdc-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpdc/ntpdc.html b/ntpdc/ntpdc.html
index 3d9da3695..e133ec7b0 100644
--- a/ntpdc/ntpdc.html
+++ b/ntpdc/ntpdc.html
@@ -3,7 +3,7 @@
 ntpdc: NTPD Control User's Manual
 
 
-
+
 
 
 
@@ -14,20 +14,18 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 ntpdc: NTPD Control User's Manual
 
-
 

-Next: ntpdc Description,
+Next: ntpdc Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 ntpdc: NTPD Control User Manual
@@ -38,7 +36,7 @@ display the time offset of the system clock relative to the server
 clock.  Run as root, it can correct the system clock to this offset as
 well.  It can be run as an interactive command or from a cron job.
 
-  This document applies to version 4.2.8p10 of ntpdc.
+  
This document applies to version 4.2.8p11 of ntpdc.
 
   
The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
 IETF specification.
@@ -57,10 +55,9 @@ IETF specification.
 
 
 
-
 

-
-
+
+

 
 
 
@@ -79,10 +76,9 @@ the +4.567 +/- 0.089 secs indicates the time offset and
 error bound of the system clock relative to the server clock.
 
 
-
 

-
-
+
+

 
 
 Invoking ntpdc
@@ -119,7 +115,7 @@ using the agtexi-cmd template and the option descriptions for the <
 This software is released under the NTP license, <http://ntp.org/license>.
 
 
-ntpdc usage:                   ntpdc help/usage (--help)
+
ntpdc usage:                   ntpdc help/usage (--help)
 
ntpdc ipv4:                    ipv4 option (-4)
 
ntpdc ipv6:                    ipv6 option (-6)
 
ntpdc command:                 command option (-c)
@@ -137,27 +133,26 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
 

-Next: ntpdc ipv4,
+Next: ntpdc ipv4,
 Up: ntpdc Invocation
-
+

 
 
-ntpdc help/usage (--help)
+ntpdc help/usage (--help)
 
 
 This is the automatically generated usage text for ntpdc.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p10
+ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p11
 Usage:  ntpdc [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 DNS name resolution
@@ -203,12 +198,11 @@ The following option preset mechanisms are supported:
 Please send bug reports to:  <http://bugs.ntp.org, bugs@ntp.org>
 
   
-
 

-Next: ntpdc ipv6,
+Next: ntpdc ipv6,
 Previous: ntpdc usage,
 Up: ntpdc Invocation
-
+

 
 
 ipv4 option (-4)
@@ -225,12 +219,11 @@ ipv6.
   Force DNS resolution of following host names on the command line
 to the IPv4 namespace. 
 

-
 

-Next: ntpdc command,
+Next: ntpdc command,
 Previous: ntpdc ipv4,
 Up: ntpdc Invocation
-
+

 
 
 ipv6 option (-6)
@@ -247,19 +240,18 @@ ipv4.
   Force DNS resolution of following host names on the command line
 to the IPv6 namespace. 
 

-
 

-Next: ntpdc interactive,
+Next: ntpdc interactive,
 Previous: ntpdc ipv6,
 Up: ntpdc Invocation
-
+

 
 
 command option (-c)
 
 
 This is the “run a command and exit” option. 
-This option takes a string argument cmd.
+This option takes a string argument cmd.
 
 
This option has some usage constraints.  It:
      

@@ -270,12 +262,11 @@ This option takes a string argument cmd.
 and is added to the list of commands to be executed on the specified
 host(s). 
 
-
 

-Next: ntpdc listpeers,
+Next: ntpdc listpeers,
 Previous: ntpdc command,
 Up: ntpdc Invocation
-
+

 
 
 interactive option (-i)
@@ -292,12 +283,11 @@ command, listpeers, peers, showpeers.
   Force ntpq to operate in interactive mode.  Prompts will be written
 to the standard output and commands read from the standard input. 
 

-
 

-Next: ntpdc numeric,
+Next: ntpdc numeric,
 Previous: ntpdc interactive,
 Up: ntpdc Invocation
-
+

 
 
 listpeers option (-l)
@@ -314,12 +304,11 @@ command.
   Print a list of the peers known to the server as well as a summary of
 their state. This is equivalent to the 'listpeers' interactive command. 
 

-
 

-Next: ntpdc peers,
+Next: ntpdc peers,
 Previous: ntpdc listpeers,
 Up: ntpdc Invocation
-
+

 
 
 numeric option (-n)
@@ -329,12 +318,11 @@ This is the “numeric host addresses” option.
 Output all host addresses in dotted-quad numeric format rather than
 converting to the canonical host names. 
 
-
 

-Next: ntpdc showpeers,
+Next: ntpdc showpeers,
 Previous: ntpdc numeric,
 Up: ntpdc Invocation
-
+

 
 
 peers option (-p)
@@ -351,12 +339,11 @@ command.
   Print a list of the peers known to the server as well as a summary
 of their state. This is equivalent to the 'peers' interactive command. 
 

-
 

-Next: ntpdc config,
+Next: ntpdc config,
 Previous: ntpdc peers,
 Up: ntpdc Invocation
-
+

 
 
 showpeers option (-s)
@@ -374,12 +361,11 @@ command.
 of their state. This is equivalent to the 'dmpeers' interactive command.
 
 
-
 

-Next: ntpdc exit status,
+Next: ntpdc exit status,
 Previous: ntpdc showpeers,
 Up: ntpdc Invocation
-
+

 
 
 presetting/configuring ntpdc
@@ -397,9 +383,9 @@ values are treated like option arguments.
 $PWD
 
   The environment variables HOME, and PWD
-are expanded and replaced when ntpdc runs. 
+are expanded and replaced when ntpdc runs. 
 For any of these that are plain files, they are simply processed. 
-For any that are directories, then a file named .ntprc is searched for
+For any that are directories, then a file named .ntprc is searched for
 within that directory and processed.
 
   Configuration files may be in a wide variety of formats. 
@@ -441,78 +427,72 @@ detail to provide.  The default is to print just the version.  The licensing inf
 Only the first letter of the argument is examined:
 
      

-‘version’
Only print the version.  This is the default. 
-
‘copyright’
Name the copyright usage licensing terms. 
-
‘verbose’
Print the full copyright usage licensing terms. 
+
version
Only print the version.  This is the default. 
+
copyright
Name the copyright usage licensing terms. 
+
verbose
Print the full copyright usage licensing terms. 
 
 
 
-
 

-Next: ntpdc Usage,
+Next: ntpdc Usage,
 Previous: ntpdc config,
 Up: ntpdc Invocation
-
+

 
 
 ntpdc exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
-
‘66 (EX_NOINPUT)’
A specified configuration file could not be loaded. 
-
‘70 (EX_SOFTWARE)’
libopts had an internal operational error.  Please report
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
+
66 (EX_NOINPUT)
A specified configuration file could not be loaded. 
+
70 (EX_SOFTWARE)
libopts had an internal operational error.  Please report
 it to autogen-users@lists.sourceforge.net.  Thank you. 
 
   
-
 

-Next: ntpdc See Also,
+Next: ntpdc See Also,
 Previous: ntpdc exit status,
 Up: ntpdc Invocation
-
+

 
 
 ntpdc Usage
 
 
-
 

-Next: ntpdc Authors,
+Next: ntpdc Authors,
 Previous: ntpdc Usage,
 Up: ntpdc Invocation
-
+

 
 
 ntpdc See Also
 
 
-
 

-Next: ntpdc Bugs,
+Next: ntpdc Bugs,
 Previous: ntpdc See Also,
 Up: ntpdc Invocation
-
+

 
 
 ntpdc Authors
 
 
-
 

-Previous: ntpdc Authors,
+Previous: ntpdc Authors,
 Up: ntpdc Invocation
-
+

 
 
 ntpdc Bugs
 
 
-
 

-
-
+
+

 
 
 
diff --git a/ntpdc/ntpdc.man.in b/ntpdc/ntpdc.man.in
index bab0854b1..4b31f2e5c 100644
--- a/ntpdc/ntpdc.man.in
+++ b/ntpdc/ntpdc.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpdc @NTPDC_MS@ "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpdc @NTPDC_MS@ "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-MnaqKS/ag-YnaiJS)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:11 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:03 PM by AutoGen 5.18.5
 .\" From the definitions ntpdc-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpdc/ntpdc.mdoc.in b/ntpdc/ntpdc.mdoc.in
index 184a48769..3720f930f 100644
--- a/ntpdc/ntpdc.mdoc.in
+++ b/ntpdc/ntpdc.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpdc-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:08 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:09 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpdc-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpq/invoke-ntpq.texi b/ntpq/invoke-ntpq.texi
index eb38f3133..69f20883c 100644
--- a/ntpq/invoke-ntpq.texi
+++ b/ntpq/invoke-ntpq.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntpq.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:26:24 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 05:15:26 PM by AutoGen 5.18.5
 # From the definitions    ntpq-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -944,7 +944,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntpq - standard NTP query program - Ver. 4.2.8p10
+ntpq - standard NTP query program - Ver. 4.2.8p11
 Usage:  ntpq [ - [] | --[@{=| @}] ]... [ host ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 name resolution
diff --git a/ntpq/ntpq-opts.c b/ntpq/ntpq-opts.c
index 136662864..602d40f94 100644
--- a/ntpq/ntpq-opts.c
+++ b/ntpq/ntpq-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpq-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:13 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:12 PM by AutoGen 5.18.5
  *  From the definitions    ntpq-opts.def
  *  and the template file   options
  *
@@ -69,7 +69,7 @@ extern FILE * option_usage_fp;
  *  static const strings for ntpq options
  */
 static char const ntpq_opt_strs[1977] =
-/*     0 */ "ntpq 4.2.8p10\n"
+/*     0 */ "ntpq 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -132,13 +132,13 @@ static char const ntpq_opt_strs[1977] =
 /*  1768 */ "no-load-opts\0"
 /*  1781 */ "no\0"
 /*  1784 */ "NTPQ\0"
-/*  1789 */ "ntpq - standard NTP query program - Ver. 4.2.8p10\n"
+/*  1789 */ "ntpq - standard NTP query program - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]... [ host ...]\n\0"
 /*  1909 */ "$HOME\0"
 /*  1915 */ ".\0"
 /*  1917 */ ".ntprc\0"
 /*  1924 */ "http://bugs.ntp.org, bugs@ntp.org\0"
-/*  1958 */ "ntpq 4.2.8p10\0"
+/*  1958 */ "ntpq 4.2.8p11\0"
 /*  1972 */ "hash";
 
 /**
@@ -841,7 +841,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via ntpqOptions.pzCopyright */
-  puts(_("ntpq 4.2.8p10\n\
+  puts(_("ntpq 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -910,11 +910,11 @@ implied warranty.\n"));
   puts(_("load options from a config file"));
 
   /* referenced via ntpqOptions.pzUsageTitle */
-  puts(_("ntpq - standard NTP query program - Ver. 4.2.8p10\n\
+  puts(_("ntpq - standard NTP query program - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]... [ host ...]\n"));
 
   /* referenced via ntpqOptions.pzFullVersion */
-  puts(_("ntpq 4.2.8p10"));
+  puts(_("ntpq 4.2.8p11"));
 
   /* referenced via ntpqOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/ntpq/ntpq-opts.h b/ntpq/ntpq-opts.h
index 74f2f1247..ce90e50d9 100644
--- a/ntpq/ntpq-opts.h
+++ b/ntpq/ntpq-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpq-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:13 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:12 PM by AutoGen 5.18.5
  *  From the definitions    ntpq-opts.def
  *  and the template file   options
  *
@@ -84,9 +84,9 @@ typedef enum {
 /** count of all options for ntpq */
 #define OPTION_CT    16
 /** ntpq version */
-#define NTPQ_VERSION       "4.2.8p10"
+#define NTPQ_VERSION       "4.2.8p11"
 /** Full ntpq version text */
-#define NTPQ_FULL_VERSION  "ntpq 4.2.8p10"
+#define NTPQ_FULL_VERSION  "ntpq 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/ntpq/ntpq.1ntpqman b/ntpq/ntpq.1ntpqman
index 91ebb4035..2ef8a3275 100644
--- a/ntpq/ntpq.1ntpqman
+++ b/ntpq/ntpq.1ntpqman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpq 1ntpqman "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpq 1ntpqman "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-D4aGRT/ag-Q4ayQT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:22 PM by AutoGen 5.18.5
 .\" From the definitions ntpq-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpq/ntpq.1ntpqmdoc b/ntpq/ntpq.1ntpqmdoc
index 877bf08e2..1d801e910 100644
--- a/ntpq/ntpq.1ntpqmdoc
+++ b/ntpq/ntpq.1ntpqmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpq-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:22 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:28 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpq-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpq/ntpq.html b/ntpq/ntpq.html
index 95d1d3269..55aafc834 100644
--- a/ntpq/ntpq.html
+++ b/ntpq/ntpq.html
@@ -3,7 +3,7 @@
 ntpq: Network Time Protocol Query User's Manual
 
 
-
+
 
 
 
@@ -14,9 +14,8 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
@@ -31,12 +30,11 @@
 
 
 
-
 

-Next: ntpq Description,
+Next: ntpq Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 ntpq: Network Time Protocol Query User Manual
@@ -46,7 +44,7 @@ monitor the operational status
 and determine the performance of
 ntpd, the NTP daemon.
 
-  This document applies to version 4.2.8p10 of ntpq.
+  
This document applies to version 4.2.8p11 of ntpq.
 
 

 ntpq Description
@@ -61,12 +59,11 @@ and determine the performance of
 
 
 
-
 

-Next: Usage,
+Next: Usage,
 Previous: Top,
 Up: Top
-
+

 
 
 
@@ -89,10 +86,9 @@ The description on this page is for the NTPv4 variables.
   For examples and usage, see the NTP Debugging Techniques page.
 
 

-
 

-
-
+
+

 
 
 Invoking ntpq
@@ -154,7 +150,7 @@ namespace, while a
 -6
 qualifier forces resolution to the IPv6 namespace. 
 For examples and usage, see the
-“NTP Debugging Techniques”
+NTP Debugging Techniques
 page.
 
   Specifying a
@@ -186,12 +182,12 @@ requests being sent to a server.
 These are described following.
      

 ? [command]
help [command]
A
-‘?’
+? 
 by itself will print a list of all the commands
 known to
 ntpq
 A
-‘?’
+? 
 followed by a command name will print function and usage
 information about the command. 
 
addvars name[=value][,...]
rmvars name[,...]
clearvars
showvars
The arguments to this command consist of a list of
@@ -252,7 +248,7 @@ Variables which
 ntpq
 could not decode completely are
 marked with a trailing
-‘?’. 
+?. 
 
debug [more|less|off]
With no argument, displays the current debug level. 
 Otherwise, the debugging level is changed as indicated. 
 
delay [milliseconds]
Specify a time interval to be added to timestamps included in
@@ -368,7 +364,7 @@ commands, which iterate over a range of associations.
      
 apeers
Display a list of peers in the form:
                [tally]remote refid assid st t when pool reach delay offset jitter
-
+     
      where the output is just like the
 peers
 command except that the
@@ -376,7 +372,7 @@ command except that the
 is displayed in hex format and the association number is also displayed. 
 
associations
Display a list of mobilized associations in the form:
                ind assid status conf reach auth condition last_event cnt
-
+     
           
 Sy Variable Ta Sy Description
ind Ta index on this list
assid Ta association id
status Ta peer status word
conf Ta yes: No persistent, no: No ephemeral
reach Ta yes: No reachable, no: No unreachable
auth Ta ok, yes, bad No and none
condition Ta selection status (see the select No field of the peer status word)
last_event Ta event report (see the event No field of the peer status word)
cnt Ta event count (see the count No field of the peer status word)

      
authinfo
Display the authentication statistics counters:
@@ -473,7 +469,7 @@ and may be
 count,
 lstint,
 or any of those preceded by
-‘-’
+-
 to reverse the sort order. 
 The output columns are:
           
@@ -512,7 +508,7 @@ command,
 except that it uses previously stored data rather than making a new query. 
 
peers
Display a list of peers in the form:
                [tally]remote refid st t when pool reach delay offset jitter
-
+     
           
 Variable
Description
 
[tally]
single-character code indicating current value of the
@@ -548,7 +544,7 @@ broadcast server,
 multicast server
 
when
time in seconds, minutes, hours, or days since the last packet
 was received, or
-‘-’
+-
 if a packet has never been received
 
poll
poll interval (s)
 
reach
reach shift register (octal)
@@ -617,8 +613,8 @@ can use
 date(1)
 format specifiers to substitute the current date and time, for
 example,
-               saveconfig ntp-%Y%m%d-%H%M%S.conf.
-
+               saveconfig ntp-%Y%m%d-%H%M%S.conf.
+     
      The filename used is stored in system variable
 savedconfig. 
 Authentication is required. 
@@ -825,7 +821,7 @@ using the agtexi-cmd template and the option descriptions for the <
 This software is released under the NTP license, <http://ntp.org/license>.
 
 

-ntpq usage:                   ntpq help/usage (--help)
+
ntpq usage:                   ntpq help/usage (--help)
 
ntpq ipv4:                    ipv4 option (-4)
 
ntpq ipv6:                    ipv6 option (-6)
 
ntpq command:                 command option (-c)
@@ -840,27 +836,26 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
 

-Next: ntpq ipv4,
+Next: ntpq ipv4,
 Up: ntpq Invocation
-
+

 
 
-ntpq help/usage (--help)
+ntpq help/usage (--help)
 
 
 This is the automatically generated usage text for ntpq.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntpq - standard NTP query program - Ver. 4.2.8p11
+ntpq - standard NTP query program - Ver. 4.2.8p10
 Usage:  ntpq [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 name resolution
@@ -906,12 +901,11 @@ The valid "refid" option keywords are:
 Please send bug reports to:  <http://bugs.ntp.org, bugs@ntp.org>
 
   
-
 

-Next: ntpq ipv6,
+Next: ntpq ipv6,
 Previous: ntpq usage,
 Up: ntpq Invocation
-
+

 
 
 ipv4 option (-4)
@@ -928,12 +922,11 @@ ipv6.
   Force resolution of following host names on the command line
 to the IPv4 namespace. 
 

-
 

-Next: ntpq command,
+Next: ntpq command,
 Previous: ntpq ipv4,
 Up: ntpq Invocation
-
+

 
 
 ipv6 option (-6)
@@ -950,19 +943,18 @@ ipv4.
   Force resolution of following host names on the command line
 to the IPv6 namespace. 
 

-
 

-Next: ntpq interactive,
+Next: ntpq interactive,
 Previous: ntpq ipv6,
 Up: ntpq Invocation
-
+

 
 
 command option (-c)
 
 
 This is the “run a command and exit” option. 
-This option takes a string argument cmd.
+This option takes a string argument cmd.
 
 
This option has some usage constraints.  It:
      

@@ -973,12 +965,11 @@ This option takes a string argument cmd.
 and is added to the list of commands to be executed on the specified
 host(s). 
 
-
 

-Next: ntpq numeric,
+Next: ntpq numeric,
 Previous: ntpq command,
 Up: ntpq Invocation
-
+

 
 
 interactive option (-i)
@@ -996,12 +987,11 @@ command, peers.
 Prompts will be written to the standard output and
 commands read from the standard input. 
 
-
 

-Next: ntpq old-rv,
+Next: ntpq old-rv,
 Previous: ntpq interactive,
 Up: ntpq Invocation
-
+

 
 
 numeric option (-n)
@@ -1011,13 +1001,11 @@ This is the “numeric host addresses” option.
 Output all host addresses in dotted-quad numeric format rather than
 converting to the canonical host names. 
 
-
-
 

-Next: ntpq peers,
+Next: ntpq peers,
 Previous: ntpq numeric,
 Up: ntpq Invocation
-
+

 
 
 old-rv option
@@ -1034,12 +1022,11 @@ Using an environment variable to
 preset this option in a script will enable both older and
 newer ntpq to behave identically in this regard. 
 
-
 

-Next: ntpq refid,
+Next: ntpq refid,
 Previous: ntpq old-rv,
 Up: ntpq Invocation
-
+

 
 
 peers option (-p)
@@ -1056,12 +1043,11 @@ interactive.
   Print a list of the peers known to the server as well as a summary
 of their state. This is equivalent to the 'peers' interactive command. 
 

-
 

-Next: ntpq wide,
+Next: ntpq wide,
 Previous: ntpq peers,
 Up: ntpq Invocation
-
+

 
 
 refid option (-r)
@@ -1076,17 +1062,16 @@ This option takes a keyword argument.
 The argument sets an enumeration value that can be tested by comparing the option value macro (OPT_VALUE_REFID). 
 The available keywords are:
                   hash ipv4
-
+    
      or their numeric equivalent.
 
   
Set the default display format for S2+ refids. 
 

-
 

-Next: ntpq config,
+Next: ntpq config,
 Previous: ntpq refid,
 Up: ntpq Invocation
-
+

 
 
 wide option (-w)
@@ -1098,12 +1083,11 @@ more than 15 characters, display the full value, emit a newline,
 and continue the data display properly indented on the next line.
 
 
-
 

-Next: ntpq exit status,
+Next: ntpq exit status,
 Previous: ntpq wide,
 Up: ntpq Invocation
-
+

 
 
 presetting/configuring ntpq
@@ -1121,9 +1105,9 @@ values are treated like option arguments.
 $PWD
 
   The environment variables HOME, and PWD
-are expanded and replaced when ntpq runs. 
+are expanded and replaced when ntpq runs. 
 For any of these that are plain files, they are simply processed. 
-For any that are directories, then a file named .ntprc is searched for
+For any that are directories, then a file named .ntprc is searched for
 within that directory and processed.
 
   Configuration files may be in a wide variety of formats. 
@@ -1165,37 +1149,35 @@ detail to provide.  The default is to print just the version.  The licensing inf
 Only the first letter of the argument is examined:
 
      

-‘version’
Only print the version.  This is the default. 
-
‘copyright’
Name the copyright usage licensing terms. 
-
‘verbose’
Print the full copyright usage licensing terms. 
+
version
Only print the version.  This is the default. 
+
copyright
Name the copyright usage licensing terms. 
+
verbose
Print the full copyright usage licensing terms. 
 
 
 
-
 

-Previous: ntpq config,
+Previous: ntpq config,
 Up: ntpq Invocation
-
+

 
 
 ntpq exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
-
‘66 (EX_NOINPUT)’
A specified configuration file could not be loaded. 
-
‘70 (EX_SOFTWARE)’
libopts had an internal operational error.  Please report
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
+
66 (EX_NOINPUT)
A specified configuration file could not be loaded. 
+
70 (EX_SOFTWARE)
libopts had an internal operational error.  Please report
 it to autogen-users@lists.sourceforge.net.  Thank you. 
 
 
 
-
 

-Next: Internal Commands,
+Next: Internal Commands,
 Previous: ntpq Description,
 Up: Top
-
+

 
 
 
@@ -1237,12 +1219,11 @@ Up: Top
 

 
 
-
 

-Next: Control Message Commands,
+Next: Control Message Commands,
 Previous: Usage,
 Up: Top
-
+

 
 
 
@@ -1251,9 +1232,9 @@ Up: Top
 Interactive format commands consist of a keyword followed by zero to four arguments.  Only enough characters of the full keyword to uniquely identify the command need be typed.  The output of a command is normally sent to the standard output, but optionally the output of individual commands may be sent to a file by appending a >, followed by a file name, to the command line.  A number of interactive format commands are executed entirely within the ntpq program itself and do not result in NTP mode-6 requests being sent to a server.  These are described following.
 
      

-? [command_keyword]
help [command_keyword]
A ? by itself will print a list of all the command keywords known to ntpq.  A ? followed by a command keyword will print function and usage information about the command.
+
 ? [command_keyword]
help [command_keyword]
A ? by itself will print a list of all the command keywords known to ntpq.  A ? followed by a command keyword will print function and usage information about the command.
 
-     
>addvars name [ = value] [...]
rmvars name [...]
clearvars</dt>
The arguments to these commands consist of a list of items of the form
+     
 >addvars name [ = value] [...]
rmvars name [...]
clearvars</dt>
The arguments to these commands consist of a list of items of the form
 name = value, where the = value is ignored,
 and can be omitted in read requests. 
 ntpq maintains an internal list in which data to be included
@@ -1267,43 +1248,43 @@ The rmvars command can be used to remove individual variables
 from the list,
 while the clearlist command removes all variables from the list.
 
-     
cooked
Display server messages in prettyprint format.
+     
 cooked
Display server messages in prettyprint format.
 
-     
debug more | less | off
Turns internal query program debugging on and off.
+     
 debug more | less | off
Turns internal query program debugging on and off.
 
-     
delay milliseconds
Specify a time interval to be added to timestamps included in requests which require authentication.  This is used to enable (unreliable) server reconfiguration over long delay network paths or between machines whose clocks are unsynchronized.  Actually the server does not now require timestamps in authenticated requests, so this command may be obsolete.
+     
 delay milliseconds
Specify a time interval to be added to timestamps included in requests which require authentication.  This is used to enable (unreliable) server reconfiguration over long delay network paths or between machines whose clocks are unsynchronized.  Actually the server does not now require timestamps in authenticated requests, so this command may be obsolete.
 
-     
host name
Set the host to which future queries will be sent. 
+     
 host name
Set the host to which future queries will be sent. 
 The name may be either a DNS name or a numeric address.
 
-     
hostnames [yes | no]
If yes is specified, host names are printed in information displays. 
+     
 hostnames [yes | no]
If yes is specified, host names are printed in information displays. 
 If no is specified, numeric addresses are printed instead. 
 The default is yes,
 unless modified using the command line -n switch.
 
-     
keyid keyid
This command specifies the key number to be used
+     
 keyid keyid
This command specifies the key number to be used
 to authenticate configuration requests. 
 This must correspond to a key ID configured in ntp.conf for this purpose.
 
-     
keytype
Specify the digest algorithm to use for authenticated requests,
+     
 keytype
Specify the digest algorithm to use for authenticated requests,
 with default MD5. 
 If the OpenSSL library is installed,
 digest can be be any message digest algorithm supported by the library. 
 The current selections are: AES128CMAC, MD2, MD4, MD5, MDC2, RIPEMD160, SHA and SHA1.
 
-     
ntpversion 1 | 2 | 3 | 4
Sets the NTP version number which ntpq claims in packets. 
+     
 ntpversion 1 | 2 | 3 | 4
Sets the NTP version number which ntpq claims in packets. 
 Defaults to 2. 
 Note that mode-6 control messages (and modes, for that matter)
 didn't exist in NTP version 1.
 
-     
passwd
This command prompts for a password to authenticate requests. 
+     
 passwd
This command prompts for a password to authenticate requests. 
 The password must correspond to the key ID configured in ntp.conf for this purpose.
 
-     
quit
Exit ntpq.
+     
 quit
Exit ntpq.
 
-     
raw
Display server messages as received and without reformatting.
+     
 raw
Display server messages as received and without reformatting.
 
-     
timeout millseconds
Specify a timeout period for responses to server queries. 
+     
 timeout millseconds
Specify a timeout period for responses to server queries. 
 The default is about 5000 milliseconds. 
 Note that since ntpq retries each query once after a timeout
 the total waiting time for a timeout will be twice the timeout value set.
@@ -1311,12 +1292,11 @@ the total waiting time for a timeout will be twice the timeout value set.
   
 
 
-
 

-Next: Status Words and Kiss Codes,
+Next: Status Words and Kiss Codes,
 Previous: Internal Commands,
 Up: Top
-
+

 
 
 
@@ -1369,35 +1349,35 @@ event count (see the count field of the 
 
      

 
-     
clockvar assocID [name [ = value [...]] [...]]
cv assocID [name [ = value [...] ][...]]
Display a list of clock variables for those associations supporting a reference clock.
+     
 clockvar assocID [name [ = value [...]] [...]]
cv assocID [name [ = value [...] ][...]]
Display a list of clock variables for those associations supporting a reference clock.
 
-     
:config [...]
Send the remainder of the command line, including whitespace, to the server
+     
 :config [...]
Send the remainder of the command line, including whitespace, to the server
 as a run-time configuration command in the same format
 as the configuration file. 
 This command is experimental until further notice and clarification. 
 Authentication is of course required.
 
-     
config-from-file filename
Send the each line of filename to the server as
+     
 config-from-file filename
Send the each line of filename to the server as
 run-time configuration commands in the same format as the configuration file. 
 This command is experimental until further notice and clarification. 
 Authentication is required.
 
-     
ifstats
Display statistics for each local network address. 
+     
 ifstats
Display statistics for each local network address. 
 Authentication is required.
 
-     
iostats
Display network and reference clock I/O statistics.
+     
 iostats
Display network and reference clock I/O statistics.
 
-     
kerninfo
Display kernel loop and PPS statistics. 
+     
 kerninfo
Display kernel loop and PPS statistics. 
 As with other ntpq output, times are in milliseconds. 
 The precision value displayed is in milliseconds as well,
 unlike the precision system variable.
 
-     
lassociations
Perform the same function as the associations command,
+     
 lassociations
Perform the same function as the associations command,
 except display mobilized and unmobilized associations.
 
-     
monstats
Display monitor facility statistics.
+     
 monstats
Display monitor facility statistics.
 
-     
mrulist [limited | kod | mincount=count | laddr=localaddr | sort=sortorder | resany=hexmask | resall=hexmask]
Obtain and print traffic counts collected and maintained by
+     
 mrulist [limited | kod | mincount=count | laddr=localaddr | sort=sortorder | resany=hexmask | resall=hexmask]
Obtain and print traffic counts collected and maintained by
 the monitor facility. 
 With the exception of sort=sortorder,
 the options filter the list returned by ntpd. 
@@ -1463,15 +1443,15 @@ could not be verified in parentheses.
 
      

 
-     
mreadvar assocID assocID [ variable_name [ = value[ ... ]
mrv assocID assocID [ variable_name [ = value[ ... ]
Perform the same function as the readvar command,
+     
 mreadvar assocID assocID [ variable_name [ = value[ ... ]
 mrv assocID assocID [ variable_name [ = value[ ... ]
Perform the same function as the readvar command,
 except for a range of association IDs. 
 This range is determined from the association list cached by
 the most recent associations command.
 
-     
passociations
Perform the same function as the associations command, except that
+     
 passociations
Perform the same function as the associations command, except that
 it uses previously stored data rather than making a new query.
 
-     
peers
Display a list of peers in the form:
+     
 peers
Display a list of peers in the form:
 

 [tally]remote refid st t when pool reach delay offset jitter
 
@@ -1529,7 +1509,7 @@ jitter
 
      

 
-     
readvar assocID name [ = value ] [,...]
rv assocID [ name ] [,...]
Display the specified variables. 
+     
 readvar assocID name [ = value ] [,...]
rv assocID [ name ] [,...]
Display the specified variables. 
 If assocID is zero,
 the variables are from the system variables name space,
 otherwise they are from the peer variables name space. 
@@ -1544,7 +1524,7 @@ Some NTP timestamps are represented in the format YYYYMMDDTTTT,
 where YYYY is the year, MM the month of year, DD the day of month and
 TTTT the time of day.
 
-     
saveconfig filename
Write the current configuration, including any runtime modifications
+     
 saveconfig filename
Write the current configuration, including any runtime modifications
 given with :config or config-from-file,
 to the ntpd host's file filename. 
 This command will be rejected by the server unless
@@ -1556,26 +1536,25 @@ to substitute the current date and time, for example,
 The filename used is stored in system variable savedconfig. 
 Authentication is required.
 
-     
writevar assocID name = value [,...]
Write the specified variables. 
+     
 writevar assocID name = value [,...]
Write the specified variables. 
 If the assocID is zero, the variables are from the
 system variables name space, otherwise they are from the
 peer variables name	space. 
 The assocID is required,
 as the same name can occur in both spaces.
 
-     
sysinfo
Display operational summary.
+     
 sysinfo
Display operational summary.
 
-     
sysstats
Print statistics counters maintained in the protocol module.
+     
 sysstats
Print statistics counters maintained in the protocol module.
 
   
 
 
-
 

-Next: System Variables,
+Next: System Variables,
 Previous: Control Message Commands,
 Up: Top
-
+

 
 
 
@@ -1600,12 +1579,11 @@ They are now displayed, when appropriate,
 in the reference identifier field in various billboards.
 
 
-
 

-Next: Peer Variables,
+Next: Peer Variables,
 Previous: Status Words and Kiss Codes,
 Up: Top
-
+

 
 
 
@@ -1752,12 +1730,11 @@ NTP seconds when the certificate expires
   

 
 
-
 

-Next: Clock Variables,
+Next: Clock Variables,
 Previous: System Variables,
 Up: Top
-
+

 
 
 
@@ -1918,11 +1895,10 @@ Autokey signature timestamp
   

 
 
-
 

-Previous: Peer Variables,
+Previous: Peer Variables,
 Up: Top
-
+

 
 
 
diff --git a/ntpq/ntpq.man.in b/ntpq/ntpq.man.in
index 722947f22..d28d30c74 100644
--- a/ntpq/ntpq.man.in
+++ b/ntpq/ntpq.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpq @NTPQ_MS@ "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpq @NTPQ_MS@ "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-D4aGRT/ag-Q4ayQT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:22 PM by AutoGen 5.18.5
 .\" From the definitions ntpq-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpq/ntpq.mdoc.in b/ntpq/ntpq.mdoc.in
index 3b0b10659..e0804f161 100644
--- a/ntpq/ntpq.mdoc.in
+++ b/ntpq/ntpq.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpq-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:22 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:28 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpq-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpsnmpd/invoke-ntpsnmpd.texi b/ntpsnmpd/invoke-ntpsnmpd.texi
index 5174f7266..90fd00d14 100644
--- a/ntpsnmpd/invoke-ntpsnmpd.texi
+++ b/ntpsnmpd/invoke-ntpsnmpd.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntpsnmpd.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:26:32 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 05:15:36 PM by AutoGen 5.18.5
 # From the definitions    ntpsnmpd-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -47,30 +47,31 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p10
-Usage:  ntpsnmpd [ - [] | --[@{=| @}] ]...
+ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.7p245
+USAGE:  ntpsnmpd [ - [] | --[@{=| @}] ]...
   Flg Arg Option-Name    Description
    -n no  nofork         Do not fork
    -p no  syslog         Log to syslog()
       Str agentxsocket   The socket address ntpsnmpd uses to connect to net-snmpd
-      opt version        output version information and exit
-   -? no  help           display extended usage information and exit
-   -! no  more-help      extended usage information passed thru pager
-   -> opt save-opts      save the option state to a config file
-   -< Str load-opts      load options from a config file
-                                - disabled as '--no-load-opts'
+      opt version        Output version information and exit
+   -? no  help           Display extended usage information and exit
+   -! no  more-help      Extended usage information passed thru pager
+   -> opt save-opts      Save the option state to a config file
+   -< Str load-opts      Load options from a config file
+                                - disabled as --no-load-opts
                                 - may appear multiple times
 
 Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
 
+
 The following option preset mechanisms are supported:
  - reading file $HOME/.ntprc
  - reading file ./.ntprc
  - examining environment variables named NTPSNMPD_*
 
-Please send bug reports to:  
+please send bug reports to:  http://bugs.ntp.org, bugs@@ntp.org
 @end example
 @exampleindent 4
 
diff --git a/ntpsnmpd/ntpsnmpd-opts.c b/ntpsnmpd/ntpsnmpd-opts.c
index 92abfdfab..8e957bc79 100644
--- a/ntpsnmpd/ntpsnmpd-opts.c
+++ b/ntpsnmpd/ntpsnmpd-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpsnmpd-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:26 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:31 PM by AutoGen 5.18.5
  *  From the definitions    ntpsnmpd-opts.def
  *  and the template file   options
  *
@@ -61,7 +61,7 @@ extern FILE * option_usage_fp;
  *  static const strings for ntpsnmpd options
  */
 static char const ntpsnmpd_opt_strs[1613] =
-/*     0 */ "ntpsnmpd 4.2.8p10\n"
+/*     0 */ "ntpsnmpd 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -101,14 +101,14 @@ static char const ntpsnmpd_opt_strs[1613] =
 /*  1415 */ "no-load-opts\0"
 /*  1428 */ "no\0"
 /*  1431 */ "NTPSNMPD\0"
-/*  1440 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p10\n"
+/*  1440 */ "ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]...\n\0"
 /*  1544 */ "$HOME\0"
 /*  1550 */ ".\0"
 /*  1552 */ ".ntprc\0"
 /*  1559 */ "http://bugs.ntp.org, bugs@ntp.org\0"
 /*  1593 */ "\n\0"
-/*  1595 */ "ntpsnmpd 4.2.8p10";
+/*  1595 */ "ntpsnmpd 4.2.8p11";
 
 /**
  *  nofork option description:
@@ -554,7 +554,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via ntpsnmpdOptions.pzCopyright */
-  puts(_("ntpsnmpd 4.2.8p10\n\
+  puts(_("ntpsnmpd 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -599,14 +599,14 @@ implied warranty.\n"));
   puts(_("load options from a config file"));
 
   /* referenced via ntpsnmpdOptions.pzUsageTitle */
-  puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p10\n\
+  puts(_("ntpsnmpd - NTP SNMP MIB agent - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]...\n"));
 
   /* referenced via ntpsnmpdOptions.pzExplain */
   puts(_("\n"));
 
   /* referenced via ntpsnmpdOptions.pzFullVersion */
-  puts(_("ntpsnmpd 4.2.8p10"));
+  puts(_("ntpsnmpd 4.2.8p11"));
 
   /* referenced via ntpsnmpdOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/ntpsnmpd/ntpsnmpd-opts.h b/ntpsnmpd/ntpsnmpd-opts.h
index 58880ccb1..5219659d3 100644
--- a/ntpsnmpd/ntpsnmpd-opts.h
+++ b/ntpsnmpd/ntpsnmpd-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntpsnmpd-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:26 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:31 PM by AutoGen 5.18.5
  *  From the definitions    ntpsnmpd-opts.def
  *  and the template file   options
  *
@@ -76,9 +76,9 @@ typedef enum {
 /** count of all options for ntpsnmpd */
 #define OPTION_CT    8
 /** ntpsnmpd version */
-#define NTPSNMPD_VERSION       "4.2.8p10"
+#define NTPSNMPD_VERSION       "4.2.8p11"
 /** Full ntpsnmpd version text */
-#define NTPSNMPD_FULL_VERSION  "ntpsnmpd 4.2.8p10"
+#define NTPSNMPD_FULL_VERSION  "ntpsnmpd 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/ntpsnmpd/ntpsnmpd.1ntpsnmpdman b/ntpsnmpd/ntpsnmpd.1ntpsnmpdman
index 18795f711..2d5015634 100644
--- a/ntpsnmpd/ntpsnmpd.1ntpsnmpdman
+++ b/ntpsnmpd/ntpsnmpd.1ntpsnmpdman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpsnmpd 1ntpsnmpdman "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpsnmpd 1ntpsnmpdman "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-_Ia4FU/ag-lJaWEU)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:33 PM by AutoGen 5.18.5
 .\" From the definitions ntpsnmpd-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpsnmpd/ntpsnmpd.1ntpsnmpdmdoc b/ntpsnmpd/ntpsnmpd.1ntpsnmpdmdoc
index 4a41f2131..b7aa23e34 100644
--- a/ntpsnmpd/ntpsnmpd.1ntpsnmpdmdoc
+++ b/ntpsnmpd/ntpsnmpd.1ntpsnmpdmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpsnmpd-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:30 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:39 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpsnmpd-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/ntpsnmpd/ntpsnmpd.html b/ntpsnmpd/ntpsnmpd.html
index cfd504a89..c12d7669b 100644
--- a/ntpsnmpd/ntpsnmpd.html
+++ b/ntpsnmpd/ntpsnmpd.html
@@ -3,7 +3,7 @@
 ntpsnmpd: Network Time Protocol SNMP Daemon User's Manual
 
 
-
+
 
 
 
@@ -14,9 +14,8 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
@@ -31,12 +30,11 @@
 
 
 
-
 

-Next: ntpsnmpd Description,
+Next: ntpsnmpd Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 ntpsnmpd: Network Time Protocol Query User Manual
@@ -44,7 +42,7 @@ Up: (dir)
 The ntpsnmpd utility program is used to monitor NTP daemon ntpd
 operations and determine performance.  It uses the standard NTP mode 6 control
 
-  
This document applies to version 4.2.8p10 of ntpsnmpd.
+  
This document applies to version 4.2.8p11 of ntpsnmpd.
 
 

 ntpsnmpd Description:             Description
@@ -53,12 +51,11 @@ operations and determine performance.  It uses the standard NTP mode 6 control
 
 
 
-
 

-Next: Usage,
+Next: Usage,
 Previous: Top,
 Up: Top
-
+

 
 
 
@@ -67,11 +64,10 @@ Up: Top
 The ntpsnmpd utility program provides an SNMP MIB agent for ntpd.
 
 

-
 

-Previous: ntpsnmpd Description,
+Previous: ntpsnmpd Description,
 Up: Top
-
+

 
 
 
diff --git a/ntpsnmpd/ntpsnmpd.man.in b/ntpsnmpd/ntpsnmpd.man.in
index 096ac879f..4c4a392dd 100644
--- a/ntpsnmpd/ntpsnmpd.man.in
+++ b/ntpsnmpd/ntpsnmpd.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpsnmpd @NTPSNMPD_MS@ "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH ntpsnmpd @NTPSNMPD_MS@ "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-_Ia4FU/ag-lJaWEU)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:33 PM by AutoGen 5.18.5
 .\" From the definitions ntpsnmpd-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/ntpsnmpd/ntpsnmpd.mdoc.in b/ntpsnmpd/ntpsnmpd.mdoc.in
index 91ad2ae62..e383e0c10 100644
--- a/ntpsnmpd/ntpsnmpd.mdoc.in
+++ b/ntpsnmpd/ntpsnmpd.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpsnmpd-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:30 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:15:39 PM by AutoGen 5.18.5
 .\"  From the definitions    ntpsnmpd-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/packageinfo.sh b/packageinfo.sh
index 9579f04bd..0f45fbfbb 100644
--- a/packageinfo.sh
+++ b/packageinfo.sh
@@ -83,7 +83,7 @@ CLTAG=NTP_4_2_0
 # - Numeric values increment
 # - empty 'increments' to 1
 # - NEW 'increments' to empty
-point=10
+point=11
 
 ### betapoint is normally modified by script.
 # ntp-stable Beta number (betapoint)
@@ -104,4 +104,4 @@ betapoint=
 # - - prerelease is emptied
 # else (not in RC)
 # - rcpoint is empty and unused (for now).
-rcpoint=GO
+rcpoint=
diff --git a/scripts/calc_tickadj/calc_tickadj.1calc_tickadjman b/scripts/calc_tickadj/calc_tickadj.1calc_tickadjman
index c86976516..33c6a4364 100644
--- a/scripts/calc_tickadj/calc_tickadj.1calc_tickadjman
+++ b/scripts/calc_tickadj/calc_tickadj.1calc_tickadjman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-mfaiQP/ag-zfaqPP)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:26 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:49:40 AM by AutoGen 5.18.5
 .\" From the definitions calc_tickadj-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/calc_tickadj/calc_tickadj.1calc_tickadjmdoc b/scripts/calc_tickadj/calc_tickadj.1calc_tickadjmdoc
index 3b7003a18..075524066 100644
--- a/scripts/calc_tickadj/calc_tickadj.1calc_tickadjmdoc
+++ b/scripts/calc_tickadj/calc_tickadj.1calc_tickadjmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (calc_tickadj-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:27 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:49:43 AM by AutoGen 5.18.5
 .\"  From the definitions    calc_tickadj-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/calc_tickadj/calc_tickadj.html b/scripts/calc_tickadj/calc_tickadj.html
index 2474db630..930d90ce8 100644
--- a/scripts/calc_tickadj/calc_tickadj.html
+++ b/scripts/calc_tickadj/calc_tickadj.html
@@ -3,7 +3,7 @@
 calc_tickadj User's Manual
 
 
-
+
 
 
 
@@ -14,26 +14,24 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 calc_tickadj User's Manual
 
-
 

-Next: calc_tickadj Description,
+Next: calc_tickadj Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 calc_tickadj User's Manual
 
 This document describes the use of the NTP Project's calc_tickadj program. 
-This document applies to version 4.2.8p10 of calc_tickadj.
+This document applies to version 4.2.8p11 of calc_tickadj.
 
   

 Short Contents
@@ -48,12 +46,10 @@ This document applies to version 4.2.8p10 of calc_tickadj.
 
 
 
-
-
 

-Previous: calc_tickadj Description,
+Previous: calc_tickadj Description,
 Up: Top
-
+

 
 
 Invoking calc_tickadj
@@ -86,32 +82,30 @@ current tick manually on command line.
 using the agtexi-cmd template and the option descriptions for the calc_tickadj program.
 
 
-calc_tickadj usage:                   calc_tickadj help/usage (--help)
+
calc_tickadj usage:                   calc_tickadj help/usage (--help)
 
calc_tickadj drift-file:              drift-file option (-d)
 
calc_tickadj tick:                    tick option (-t)
 
calc_tickadj exit status:             exit status
 
 
 
-
-
 

-Next: calc_tickadj drift-file,
+Next: calc_tickadj drift-file,
 Up: calc_tickadj Invocation
-
+

 
 
-calc_tickadj help/usage (--help)
+calc_tickadj help/usage (--help)
 
 
 This is the automatically generated usage text for calc_tickadj.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
 
calc_tickadj - Calculates "optimal" value for tick given ntp drift file. - Ver. 4.2.7p467
@@ -126,13 +120,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
-
 

-Next: calc_tickadj tick,
+Next: calc_tickadj tick,
 Previous: calc_tickadj usage,
 Up: calc_tickadj Invocation
-
+

 
 
 drift-file option (-d)
@@ -142,13 +134,11 @@ This is the “ntp drift file to use” option.
 This option takes a string argument. 
 Use the specified drift file for calculations
 
-
-
 

-Next: calc_tickadj exit status,
+Next: calc_tickadj exit status,
 Previous: calc_tickadj drift-file,
 Up: calc_tickadj Invocation
-
+

 
 
 tick option (-t)
@@ -158,20 +148,18 @@ This is the “tick value of this host” option.
 This option takes a number argument. 
 The current tick which to adjustment will be calculated
 
-
-
 

-Previous: calc_tickadj tick,
+Previous: calc_tickadj tick,
 Up: calc_tickadj Invocation
-
+

 
 
 calc_tickadj exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
 
 
diff --git a/scripts/calc_tickadj/calc_tickadj.man.in b/scripts/calc_tickadj/calc_tickadj.man.in
index c86976516..33c6a4364 100644
--- a/scripts/calc_tickadj/calc_tickadj.man.in
+++ b/scripts/calc_tickadj/calc_tickadj.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH calc_tickadj 1calc_tickadjman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH calc_tickadj 1calc_tickadjman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-mfaiQP/ag-zfaqPP)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:26 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:49:40 AM by AutoGen 5.18.5
 .\" From the definitions calc_tickadj-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/calc_tickadj/calc_tickadj.mdoc.in b/scripts/calc_tickadj/calc_tickadj.mdoc.in
index 3b7003a18..075524066 100644
--- a/scripts/calc_tickadj/calc_tickadj.mdoc.in
+++ b/scripts/calc_tickadj/calc_tickadj.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (calc_tickadj-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:27 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:49:43 AM by AutoGen 5.18.5
 .\"  From the definitions    calc_tickadj-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/calc_tickadj/invoke-calc_tickadj.texi b/scripts/calc_tickadj/invoke-calc_tickadj.texi
index 4b8abcaf2..9c4b7ed2f 100644
--- a/scripts/calc_tickadj/invoke-calc_tickadj.texi
+++ b/scripts/calc_tickadj/invoke-calc_tickadj.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-calc_tickadj.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:28 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:49:45 AM by AutoGen 5.18.5
 # From the definitions    calc_tickadj-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
diff --git a/scripts/invoke-plot_summary.texi b/scripts/invoke-plot_summary.texi
index acacb59ce..e2c7d958a 100644
--- a/scripts/invoke-plot_summary.texi
+++ b/scripts/invoke-plot_summary.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-plot_summary.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:17 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:55:58 PM by AutoGen 5.18.5
 # From the definitions    plot_summary-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -41,7 +41,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-plot_summary - plot statistics generated by summary script - Ver. 4.2.8p10
+plot_summary - plot statistics generated by summary script - Ver. 4.2.8p11
 USAGE: plot_summary [ - [] | --[@{=| @}] ]... 
 
         --directory=str          Where the summary files are
diff --git a/scripts/invoke-summary.texi b/scripts/invoke-summary.texi
index 994c2f736..2a6d5a4fb 100644
--- a/scripts/invoke-summary.texi
+++ b/scripts/invoke-summary.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-summary.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:21 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:56:04 PM by AutoGen 5.18.5
 # From the definitions    summary-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -42,7 +42,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-summary - compute various stastics from NTP stat files - Ver. 4.2.8p10
+summary - compute various stastics from NTP stat files - Ver. 4.2.8p11
 USAGE: summary [ - [] | --[@{=| @}] ]... 
 
         --directory=str          Directory containing stat files
diff --git a/scripts/ntp-wait/invoke-ntp-wait.texi b/scripts/ntp-wait/invoke-ntp-wait.texi
index e03dbf0d0..786f3b7e2 100644
--- a/scripts/ntp-wait/invoke-ntp-wait.texi
+++ b/scripts/ntp-wait/invoke-ntp-wait.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntp-wait.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:32 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:49:53 AM by AutoGen 5.18.5
 # From the definitions    ntp-wait-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -61,7 +61,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p10
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p11
 USAGE: ntp-wait [ - [] | --[@{=| @}] ]... 
 
     -n, --tries=num              Number of times to check ntpd
diff --git a/scripts/ntp-wait/ntp-wait-opts b/scripts/ntp-wait/ntp-wait-opts
index 674825a02..4e6c4a01b 100644
--- a/scripts/ntp-wait/ntp-wait-opts
+++ b/scripts/ntp-wait/ntp-wait-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (ntp-wait-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:32 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:49:48 AM by AutoGen 5.18.5
 # From the definitions    ntp-wait-opts.def
 # and the template file   perlopt
 
@@ -40,7 +40,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p10
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p11
 USAGE: ntp-wait [ - [] | --[{=| }] ]... 
 
     -n, --tries=num              Number of times to check ntpd
diff --git a/scripts/ntp-wait/ntp-wait.1ntp-waitman b/scripts/ntp-wait/ntp-wait.1ntp-waitman
index e7abeb2e8..43158be1c 100644
--- a/scripts/ntp-wait/ntp-wait.1ntp-waitman
+++ b/scripts/ntp-wait/ntp-wait.1ntp-waitman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntp-wait 1ntp-waitman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntp-wait 1ntp-waitman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-tuay0Q/ag-GuaGZQ)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:29 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:49:50 AM by AutoGen 5.18.5
 .\" From the definitions ntp-wait-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntp-wait/ntp-wait.1ntp-waitmdoc b/scripts/ntp-wait/ntp-wait.1ntp-waitmdoc
index f2cc05046..bd33fc9fa 100644
--- a/scripts/ntp-wait/ntp-wait.1ntp-waitmdoc
+++ b/scripts/ntp-wait/ntp-wait.1ntp-waitmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntp-wait-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:31 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:49:55 AM by AutoGen 5.18.5
 .\"  From the definitions    ntp-wait-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/ntp-wait/ntp-wait.html b/scripts/ntp-wait/ntp-wait.html
index ce1a4ba37..ef8e53e88 100644
--- a/scripts/ntp-wait/ntp-wait.html
+++ b/scripts/ntp-wait/ntp-wait.html
@@ -3,7 +3,7 @@
 Ntp-wait User's Manual
 
 
-
+
 
 
 
@@ -14,20 +14,18 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 Ntp-wait User's Manual
 
-
 

-Next: ntp-wait Description,
+Next: ntp-wait Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
   This document describes the use of the NTP Project's ntp-wait program.
@@ -41,7 +39,7 @@ until the system's time has stabilized and synchronized,
 and only then start any applicaitons (like database servers) that require
 accurate and stable time.
 
-  
This document applies to version 4.2.8p10 of ntp-wait.
+  
This document applies to version 4.2.8p11 of ntp-wait.
 
 

 Short Contents
@@ -55,11 +53,9 @@ accurate and stable time.
 
 
 
-
-
 

-
-
+
+

 
 
 0.1 Invoking ntp-wait
@@ -89,7 +85,7 @@ has set the time.
 using the agtexi-cmd template and the option descriptions for the ntp-wait program.
 
 
-ntp-wait usage:                   ntp-wait help/usage (--help)
+
ntp-wait usage:                   ntp-wait help/usage (--help)
 
ntp-wait tries:                   tries option (-n)
 
ntp-wait sleep:                   sleep option (-s)
 
ntp-wait verbose:                 verbose option (-v)
@@ -99,28 +95,26 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
-
 

-Next: ntp-wait tries,
+Next: ntp-wait tries,
 Up: ntp-wait Invocation
-
+

 
 
-0.1.1 ntp-wait help/usage (--help)
+0.1.1 ntp-wait help/usage (--help)
 
 
 This is the automatically generated usage text for ntp-wait.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p10
+ntp-wait - Wait for ntpd to stabilize the system clock - Ver. 4.2.8p11
 USAGE: ntp-wait [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
 
     -n, --tries=num              Number of times to check ntpd
@@ -133,13 +127,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
-
 

-Next: ntp-wait sleep,
+Next: ntp-wait sleep,
 Previous: ntp-wait usage,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.2 tries option (-n)
@@ -150,30 +142,26 @@ This option takes a number argument.
         The maximum number of times we will check ntpd to see if
         it has been able to synchronize and stabilize the system clock. 
 
-
-
 

-Next: ntp-wait verbose,
+Next: ntp-wait verbose,
 Previous: ntp-wait tries,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.3 sleep option (-s)
 
 
 This is the “how long to sleep between tries” option. 
-This option takes a number argument secs-between-tries. 
-        We will sleep for secs-between-tries after each query
+This option takes a number argument secs-between-tries. 
+        We will sleep for secs-between-tries after each query
         of ntpd that returns "the time is not yet stable". 
 

-
-
 

-Next: ntp-wait exit status,
+Next: ntp-wait exit status,
 Previous: ntp-wait sleep,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.4 verbose option (-v)
@@ -183,41 +171,35 @@ This is the “be verbose” option.
         By default, ntp-wait is silent. 
         With this option, ntp-wait will provide status information. 
 
-
-
 

-Next: ntp-wait Authors,
+Next: ntp-wait Authors,
 Previous: ntp-wait verbose,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.5 ntp-wait exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
   
-
-
 

-Next: ntp-wait Notes,
+Next: ntp-wait Notes,
 Previous: ntp-wait exit status,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.6 ntp-wait Authors
 
 
-
-
 

-Previous: ntp-wait Authors,
+Previous: ntp-wait Authors,
 Up: ntp-wait Invocation
-
+

 
 
 0.1.7 ntp-wait Notes
diff --git a/scripts/ntp-wait/ntp-wait.man.in b/scripts/ntp-wait/ntp-wait.man.in
index 2abf6017d..c113287fe 100644
--- a/scripts/ntp-wait/ntp-wait.man.in
+++ b/scripts/ntp-wait/ntp-wait.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntp-wait @NTP_WAIT_MS@ "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntp-wait @NTP_WAIT_MS@ "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-tuay0Q/ag-GuaGZQ)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:29 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:49:50 AM by AutoGen 5.18.5
 .\" From the definitions ntp-wait-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntp-wait/ntp-wait.mdoc.in b/scripts/ntp-wait/ntp-wait.mdoc.in
index e3809a15d..c79271567 100644
--- a/scripts/ntp-wait/ntp-wait.mdoc.in
+++ b/scripts/ntp-wait/ntp-wait.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntp-wait-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:31 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:49:55 AM by AutoGen 5.18.5
 .\"  From the definitions    ntp-wait-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/ntpsweep/invoke-ntpsweep.texi b/scripts/ntpsweep/invoke-ntpsweep.texi
index 5d88fb193..17a7b6e7b 100644
--- a/scripts/ntpsweep/invoke-ntpsweep.texi
+++ b/scripts/ntpsweep/invoke-ntpsweep.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntpsweep.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:36 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:49:59 AM by AutoGen 5.18.5
 # From the definitions    ntpsweep-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -45,7 +45,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p10
+ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p11
 USAGE: ntpsweep [ - [] | --[@{=| @}] ]... [hostfile]
 
     -l, --host-list=str          Host to execute actions on
diff --git a/scripts/ntpsweep/ntpsweep-opts b/scripts/ntpsweep/ntpsweep-opts
index 109d8cc69..06dc7ce4f 100644
--- a/scripts/ntpsweep/ntpsweep-opts
+++ b/scripts/ntpsweep/ntpsweep-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (ntpsweep-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:36 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:49:57 AM by AutoGen 5.18.5
 # From the definitions    ntpsweep-opts.def
 # and the template file   perlopt
 
@@ -43,7 +43,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p10
+ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p11
 USAGE: ntpsweep [ - [] | --[{=| }] ]... [hostfile]
 
     -l, --host-list=str          Host to execute actions on
diff --git a/scripts/ntpsweep/ntpsweep.1ntpsweepman b/scripts/ntpsweep/ntpsweep.1ntpsweepman
index f6f4d516c..34a48a8bd 100644
--- a/scripts/ntpsweep/ntpsweep.1ntpsweepman
+++ b/scripts/ntpsweep/ntpsweep.1ntpsweepman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpsweep 1ntpsweepman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntpsweep 1ntpsweepman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-cfaGaS/ag-pfaO_R)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:01 AM by AutoGen 5.18.5
 .\" From the definitions ntpsweep-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntpsweep/ntpsweep.1ntpsweepmdoc b/scripts/ntpsweep/ntpsweep.1ntpsweepmdoc
index 549a58f4f..d3b142f48 100644
--- a/scripts/ntpsweep/ntpsweep.1ntpsweepmdoc
+++ b/scripts/ntpsweep/ntpsweep.1ntpsweepmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpsweep-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:35 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:50:04 AM by AutoGen 5.18.5
 .\"  From the definitions    ntpsweep-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/ntpsweep/ntpsweep.html b/scripts/ntpsweep/ntpsweep.html
index a2d13293f..b44457bc5 100644
--- a/scripts/ntpsweep/ntpsweep.html
+++ b/scripts/ntpsweep/ntpsweep.html
@@ -3,7 +3,7 @@
 ntpsweep User's Manual
 
 
-
+
 
 
 
@@ -14,25 +14,23 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 ntpsweep User's Manual
 
-
 

-Next: ntpsweep Description,
+Next: ntpsweep Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
   This document describes the use of the NTP Project's ntpsweep program.
 
-  
This document applies to version 4.2.8p10 of ntpsweep.
+  
This document applies to version 4.2.8p11 of ntpsweep.
 
   

 Short Contents
@@ -46,10 +44,9 @@ Up: (dir)
 
 
 
-
 

-
-
+
+

 
 
 0.1 Invoking ntpsweep
@@ -64,7 +61,7 @@ all peers.
 using the agtexi-cmd template and the option descriptions for the ntpsweep program.
 
 
-ntpsweep usage:                   ntpsweep help/usage (--help)
+
ntpsweep usage:                   ntpsweep help/usage (--help)
 
ntpsweep host-list:               host-list option (-l)
 
ntpsweep peers:                   peers option (-p)
 
ntpsweep maxlevel:                maxlevel option (-m)
@@ -74,27 +71,26 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
 

-Next: ntpsweep host-list,
+Next: ntpsweep host-list,
 Up: ntpsweep Invocation
-
+

 
 
-0.1.1 ntpsweep help/usage (--help)
+0.1.1 ntpsweep help/usage (--help)
 
 
 This is the automatically generated usage text for ntpsweep.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p10
+ntpsweep - Print various informations about given ntp servers - Ver. 4.2.8p11
 USAGE: ntpsweep [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [hostfile]
 
     -l, --host-list=str          Host to execute actions on
@@ -109,13 +105,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
-
 

-Next: ntpsweep peers,
+Next: ntpsweep peers,
 Previous: ntpsweep usage,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.2 host-list option (-l)
@@ -132,26 +126,24 @@ This option takes a string argument.
   Use this option to specify the host on which this script operates. 
             May appear multiple times. 
 

-
 

-Next: ntpsweep maxlevel,
+Next: ntpsweep maxlevel,
 Previous: ntpsweep host-list,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.3 peers option (-p)
 
 
 This is the “recursively list all peers a host synchronizes to” option. 
-This option has no ‘doc’ documentation. 
+This option has no doc documentation. 
 

-
 

-Next: ntpsweep strip,
+Next: ntpsweep strip,
 Previous: ntpsweep peers,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.4 maxlevel option (-m)
@@ -159,14 +151,13 @@ Up: ntpsweep Invocati
 
 This is the “traverse peers up to this level (4 is a reasonable number)” option. 
 This option takes a number argument. 
-This option has no ‘doc’ documentation. 
+This option has no doc documentation. 
 

-
 

-Next: ntpsweep host,
+Next: ntpsweep host,
 Previous: ntpsweep maxlevel,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.5 strip option (-s)
@@ -174,14 +165,13 @@ Up: ntpsweep Invocati
 
 This is the “strip this string from hostnames” option. 
 This option takes a string argument. 
-This option has no ‘doc’ documentation. 
+This option has no doc documentation. 
 

-
 

-Next: ntpsweep exit status,
+Next: ntpsweep exit status,
 Previous: ntpsweep strip,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.6 host option (-h)
@@ -189,23 +179,22 @@ Up: ntpsweep Invocati
 
 This is the “specify a single host” option. 
 This option takes a string argument. 
-This option has no ‘doc’ documentation.
+This option has no doc documentation.
 
   
NOTE: THIS OPTION IS DEPRECATED
 

-
 

-Previous: ntpsweep host,
+Previous: ntpsweep host,
 Up: ntpsweep Invocation
-
+

 
 
 0.1.7 ntpsweep exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
 
 
diff --git a/scripts/ntpsweep/ntpsweep.man.in b/scripts/ntpsweep/ntpsweep.man.in
index f6f4d516c..34a48a8bd 100644
--- a/scripts/ntpsweep/ntpsweep.man.in
+++ b/scripts/ntpsweep/ntpsweep.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntpsweep 1ntpsweepman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntpsweep 1ntpsweepman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-cfaGaS/ag-pfaO_R)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:33 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:01 AM by AutoGen 5.18.5
 .\" From the definitions ntpsweep-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntpsweep/ntpsweep.mdoc.in b/scripts/ntpsweep/ntpsweep.mdoc.in
index 549a58f4f..d3b142f48 100644
--- a/scripts/ntpsweep/ntpsweep.mdoc.in
+++ b/scripts/ntpsweep/ntpsweep.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntpsweep-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:35 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:50:04 AM by AutoGen 5.18.5
 .\"  From the definitions    ntpsweep-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/ntptrace/invoke-ntptrace.texi b/scripts/ntptrace/invoke-ntptrace.texi
index d1101e3a5..f10f347f0 100644
--- a/scripts/ntptrace/invoke-ntptrace.texi
+++ b/scripts/ntptrace/invoke-ntptrace.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntptrace.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:40 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:50:11 AM by AutoGen 5.18.5
 # From the definitions    ntptrace-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -62,7 +62,7 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntptrace - Trace peers of an NTP server - Ver. 4.2.8p10
+ntptrace - Trace peers of an NTP server - Ver. 4.2.8p11
 USAGE: ntptrace [ - [] | --[@{=| @}] ]... [host]
 
     -n, --numeric                Print IP addresses instead of hostnames
diff --git a/scripts/ntptrace/ntptrace-opts b/scripts/ntptrace/ntptrace-opts
index 4a6a2b03c..17f513ab2 100644
--- a/scripts/ntptrace/ntptrace-opts
+++ b/scripts/ntptrace/ntptrace-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (ntptrace-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:40 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 10:50:06 AM by AutoGen 5.18.5
 # From the definitions    ntptrace-opts.def
 # and the template file   perlopt
 
@@ -40,7 +40,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-ntptrace - Trace peers of an NTP server - Ver. 4.2.8p10
+ntptrace - Trace peers of an NTP server - Ver. 4.2.8p11
 USAGE: ntptrace [ - [] | --[{=| }] ]... [host]
 
     -n, --numeric                Print IP addresses instead of hostnames
diff --git a/scripts/ntptrace/ntptrace.1ntptraceman b/scripts/ntptrace/ntptrace.1ntptraceman
index 073bf4e4b..2c4e1b0e3 100644
--- a/scripts/ntptrace/ntptrace.1ntptraceman
+++ b/scripts/ntptrace/ntptrace.1ntptraceman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntptrace 1ntptraceman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntptrace 1ntptraceman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-wXa4cT/ag-JXaacT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:37 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:08 AM by AutoGen 5.18.5
 .\" From the definitions ntptrace-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntptrace/ntptrace.1ntptracemdoc b/scripts/ntptrace/ntptrace.1ntptracemdoc
index 080f4e86f..f4c355c30 100644
--- a/scripts/ntptrace/ntptrace.1ntptracemdoc
+++ b/scripts/ntptrace/ntptrace.1ntptracemdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntptrace-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:38 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:50:13 AM by AutoGen 5.18.5
 .\"  From the definitions    ntptrace-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/ntptrace/ntptrace.html b/scripts/ntptrace/ntptrace.html
index 2e88fb477..53a16e9e0 100644
--- a/scripts/ntptrace/ntptrace.html
+++ b/scripts/ntptrace/ntptrace.html
@@ -3,7 +3,7 @@
 Ntptrace User's Manual
 
 
-
+
 
 
 
@@ -14,26 +14,24 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 Ntptrace User's Manual
 
-
 

-Next: ntptrace Description,
+Next: ntptrace Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 Simple Network Time Protocol User Manual
 
 This document describes the use of the NTP Project's ntptrace program. 
-This document applies to version 4.2.8p10 of ntptrace.
+This document applies to version 4.2.8p11 of ntptrace.
 
   

 Short Contents
@@ -48,11 +46,10 @@ This document applies to version 4.2.8p10 of ntptrace.
 
 
 
-
 

-Previous: ntptrace Description,
+Previous: ntptrace Description,
 Up: Top
-
+

 
 
 Invoking ntptrace
@@ -83,7 +80,7 @@ defined in RFC-1305.
 using the agtexi-cmd template and the option descriptions for the ntptrace program.
 
 
-ntptrace usage:                   ntptrace help/usage (--help)
+
ntptrace usage:                   ntptrace help/usage (--help)
 
ntptrace numeric:                 numeric option (-n)
 
ntptrace max-hosts:               max-hosts option (-m)
 
ntptrace host:                    host option (-r)
@@ -91,27 +88,26 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
 

-Next: ntptrace numeric,
+Next: ntptrace numeric,
 Up: ntptrace Invocation
-
+

 
 
-ntptrace help/usage (--help)
+ntptrace help/usage (--help)
 
 
 This is the automatically generated usage text for ntptrace.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntptrace - Trace peers of an NTP server - Ver. 4.2.8p10
+ntptrace - Trace peers of an NTP server - Ver. 4.2.8p11
 USAGE: ntptrace [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [host]
 
     -n, --numeric                Print IP addresses instead of hostnames
@@ -124,12 +120,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
 

-Next: ntptrace max-hosts,
+Next: ntptrace max-hosts,
 Previous: ntptrace usage,
 Up: ntptrace Invocation
-
+

 
 
 numeric option (-n)
@@ -139,13 +134,11 @@ This is the “print ip addresses instead of hostnames” option.
 Output hosts as dotted-quad numeric format rather than converting to
 the canonical host names. 
 
-
-
 

-Next: ntptrace host,
+Next: ntptrace host,
 Previous: ntptrace numeric,
 Up: ntptrace Invocation
-
+

 
 
 max-hosts option (-m)
@@ -153,14 +146,13 @@ Up: ntptrace Invocati
 
 This is the “maximum number of peers to trace” option. 
 This option takes a number argument. 
-This option has no ‘doc’ documentation. 
+This option has no doc documentation. 
 

-
 

-Next: ntptrace exit status,
+Next: ntptrace exit status,
 Previous: ntptrace max-hosts,
 Up: ntptrace Invocation
-
+

 
 
 host option (-r)
@@ -168,21 +160,20 @@ Up: ntptrace Invocati
 
 This is the “single remote host” option. 
 This option takes a string argument. 
-This option has no ‘doc’ documentation. 
+This option has no doc documentation. 
 

-
 

-Previous: ntptrace host,
+Previous: ntptrace host,
 Up: ntptrace Invocation
-
+

 
 
 ntptrace exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
 
 
diff --git a/scripts/ntptrace/ntptrace.man.in b/scripts/ntptrace/ntptrace.man.in
index 89e1473db..756e60e1a 100644
--- a/scripts/ntptrace/ntptrace.man.in
+++ b/scripts/ntptrace/ntptrace.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntptrace @NTPTRACE_MS@ "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntptrace @NTPTRACE_MS@ "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-wXa4cT/ag-JXaacT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:37 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:08 AM by AutoGen 5.18.5
 .\" From the definitions ntptrace-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/ntptrace/ntptrace.mdoc.in b/scripts/ntptrace/ntptrace.mdoc.in
index 84b695474..7a50cafaf 100644
--- a/scripts/ntptrace/ntptrace.mdoc.in
+++ b/scripts/ntptrace/ntptrace.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntptrace-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:38 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 10:50:13 AM by AutoGen 5.18.5
 .\"  From the definitions    ntptrace-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/plot_summary-opts b/scripts/plot_summary-opts
index 8487c224f..462150bb8 100644
--- a/scripts/plot_summary-opts
+++ b/scripts/plot_summary-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (plot_summary-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:17 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:55:55 PM by AutoGen 5.18.5
 # From the definitions    plot_summary-opts.def
 # and the template file   perlopt
 
@@ -46,7 +46,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-plot_summary - plot statistics generated by summary script - Ver. 4.2.8p10
+plot_summary - plot statistics generated by summary script - Ver. 4.2.8p11
 USAGE: plot_summary [ - [] | --[{=| }] ]... 
 
         --directory=str          Where the summary files are
diff --git a/scripts/plot_summary.1plot_summaryman b/scripts/plot_summary.1plot_summaryman
index 04957b52a..f3a2a8ea1 100644
--- a/scripts/plot_summary.1plot_summaryman
+++ b/scripts/plot_summary.1plot_summaryman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH plot_summary 1plot_summaryman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH plot_summary 1plot_summaryman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-NpayvG/ag-0paGuG)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 04:56:00 PM by AutoGen 5.18.5
 .\" From the definitions plot_summary-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/plot_summary.1plot_summarymdoc b/scripts/plot_summary.1plot_summarymdoc
index 6b64a7286..f2ff40f4c 100644
--- a/scripts/plot_summary.1plot_summarymdoc
+++ b/scripts/plot_summary.1plot_summarymdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (plot_summary-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:20 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:56:02 PM by AutoGen 5.18.5
 .\"  From the definitions    plot_summary-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/plot_summary.html b/scripts/plot_summary.html
index 2696c4078..6a2fac5ee 100644
--- a/scripts/plot_summary.html
+++ b/scripts/plot_summary.html
@@ -3,7 +3,7 @@
 Plot_summary User's Manual
 
 
-
+
 
 
 
@@ -14,26 +14,24 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 Plot_summary User's Manual
 
-
 

-Next: plot_summary Description,
+Next: plot_summary Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 Plot_summary User Manual
 
 This document describes the use of the NTP Project's plot_summary program. 
-This document applies to version 4.2.8p10 of plot_summary.
+This document applies to version 4.2.8p11 of plot_summary.
 
   

 Short Contents
@@ -48,12 +46,10 @@ This document applies to version 4.2.8p10 of plot_summary.
 
 
 
-
-
 

-Previous: plot_summary Description,
+Previous: plot_summary Description,
 Up: Top
-
+

 
 
 Invoking plot_summary
@@ -64,7 +60,7 @@ Up: Top
 using the agtexi-cmd template and the option descriptions for the plot_summary program.
 
 
-plot_summary usage:                   plot_summary help/usage (--help)
+
plot_summary usage:                   plot_summary help/usage (--help)
 
plot_summary directory:               directory option
 
plot_summary identifier:              identifier option
 
plot_summary peer:                    peer option
@@ -74,28 +70,26 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
-
 

-Next: plot_summary directory,
+Next: plot_summary directory,
 Up: plot_summary Invocation
-
+

 
 
-plot_summary help/usage (--help)
+plot_summary help/usage (--help)
 
 
 This is the automatically generated usage text for plot_summary.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
plot_summary - plot statistics generated by summary script - Ver. 4.2.8p10
+plot_summary - plot statistics generated by summary script - Ver. 4.2.8p11
 USAGE: plot_summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
 
         --directory=str          Where the summary files are
@@ -113,13 +107,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
-
 

-Next: plot_summary identifier,
+Next: plot_summary identifier,
 Previous: plot_summary usage,
 Up: plot_summary Invocation
-
+

 
 
 directory option
@@ -130,13 +122,11 @@ This option takes a string argument.
         The directory where the plot_summary will search for the
         *_summary files generated by summary script. 
 
-
-
 

-Next: plot_summary peer,
+Next: plot_summary peer,
 Previous: plot_summary directory,
 Up: plot_summary Invocation
-
+

 
 
 identifier option
@@ -147,13 +137,11 @@ This option takes a string argument.
         Where does the plotted data come from, default to string "host" plus
         current hostname
 
-
-
 

-Next: plot_summary plot-term,
+Next: plot_summary plot-term,
 Previous: plot_summary identifier,
 Up: plot_summary Invocation
-
+

 
 
 peer option
@@ -170,13 +158,11 @@ This option takes a string argument.
   By default the peer_summary plots are not generated. Use this option to
         specify list of peers if you want to generate plots for them. 
 

-
-
 

-Next: plot_summary output-file,
+Next: plot_summary output-file,
 Previous: plot_summary peer,
 Up: plot_summary Invocation
-
+

 
 
 plot-term option
@@ -189,13 +175,11 @@ This option takes a string argument.
         dumb is it's not'. See output from  -e "set
         terminal") for the list of available options. 
 
-
-
 

-Next: plot_summary exit status,
+Next: plot_summary exit status,
 Previous: plot_summary plot-term,
 Up: plot_summary Invocation
-
+

 
 
 output-file option
@@ -205,20 +189,18 @@ This is the “output file” option.
 This option takes a str argument. 
         Output file for gnuplot, default to stdout. 
 
-
-
 

-Previous: plot_summary output-file,
+Previous: plot_summary output-file,
 Up: plot_summary Invocation
-
+

 
 
 plot_summary exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
 
 
diff --git a/scripts/plot_summary.man.in b/scripts/plot_summary.man.in
index 04957b52a..f3a2a8ea1 100644
--- a/scripts/plot_summary.man.in
+++ b/scripts/plot_summary.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH plot_summary 1plot_summaryman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH plot_summary 1plot_summaryman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-NpayvG/ag-0paGuG)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:18 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 04:56:00 PM by AutoGen 5.18.5
 .\" From the definitions plot_summary-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/plot_summary.mdoc.in b/scripts/plot_summary.mdoc.in
index 6b64a7286..f2ff40f4c 100644
--- a/scripts/plot_summary.mdoc.in
+++ b/scripts/plot_summary.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (plot_summary-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:20 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:56:02 PM by AutoGen 5.18.5
 .\"  From the definitions    plot_summary-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/summary-opts b/scripts/summary-opts
index 591ef41ec..08effab71 100644
--- a/scripts/summary-opts
+++ b/scripts/summary-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (summary-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:21 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:55:57 PM by AutoGen 5.18.5
 # From the definitions    summary-opts.def
 # and the template file   perlopt
 
@@ -44,7 +44,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-summary - compute various stastics from NTP stat files - Ver. 4.2.8p10
+summary - compute various stastics from NTP stat files - Ver. 4.2.8p11
 USAGE: summary [ - [] | --[{=| }] ]... 
 
         --directory=str          Directory containing stat files
diff --git a/scripts/summary.1summaryman b/scripts/summary.1summaryman
index ec39cfec0..d4011fb97 100644
--- a/scripts/summary.1summaryman
+++ b/scripts/summary.1summaryman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH summary 1summaryman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH summary 1summaryman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-AMaaJG/ag-NMaiIG)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:22 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 04:56:06 PM by AutoGen 5.18.5
 .\" From the definitions summary-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/summary.1summarymdoc b/scripts/summary.1summarymdoc
index 3cc4109b9..6c8eee7f7 100644
--- a/scripts/summary.1summarymdoc
+++ b/scripts/summary.1summarymdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (summary-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:23 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:56:08 PM by AutoGen 5.18.5
 .\"  From the definitions    summary-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/summary.html b/scripts/summary.html
index 13e1b0d32..b6c226c04 100644
--- a/scripts/summary.html
+++ b/scripts/summary.html
@@ -3,7 +3,7 @@
 Summary User's Manual
 
 
-
+
 
 
 
@@ -14,26 +14,24 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 Summary User's Manual
 
-
 

-Next: summary Description,
+Next: summary Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 Summary User Manual
 
 This document describes the use of the NTP Project's summary program. 
-This document applies to version 4.2.8p10 of summary.
+This document applies to version 4.2.8p11 of summary.
 
   

 Short Contents
@@ -48,11 +46,10 @@ This document applies to version 4.2.8p10 of summary.
 
 
 
-
 

-Previous: summary Description,
+Previous: summary Description,
 Up: Top
-
+

 
 
 Invoking summary
@@ -63,7 +60,7 @@ Up: Top
 using the agtexi-cmd template and the option descriptions for the summary program.
 
 
-summary usage:                   summary help/usage (--help)
+
summary usage:                   summary help/usage (--help)
 
summary directory:               directory option
 
summary end-date:                end-date option
 
summary output-directory:        output-directory option
@@ -72,27 +69,26 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
 

-Next: summary directory,
+Next: summary directory,
 Up: summary Invocation
-
+

 
 
-summary help/usage (--help)
+summary help/usage (--help)
 
 
 This is the automatically generated usage text for summary.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
summary - compute various stastics from NTP stat files - Ver. 4.2.8p10
+summary - compute various stastics from NTP stat files - Ver. 4.2.8p11
 USAGE: summary [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
 
         --directory=str          Directory containing stat files
@@ -108,12 +104,11 @@ Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
   
-
 

-Next: summary end-date,
+Next: summary end-date,
 Previous: summary usage,
 Up: summary Invocation
-
+

 
 
 directory option
@@ -124,13 +119,11 @@ This option takes a string argument.
         The directory where ntpd will search for .stat files generated
         by ntpd. 
 
-
-
 

-Next: summary output-directory,
+Next: summary output-directory,
 Previous: summary directory,
 Up: summary Invocation
-
+

 
 
 end-date option
@@ -142,13 +135,11 @@ This option takes a number argument.
         option.  Defaults to today minus one day (Use date -u +%Y%m%d)
         to get the timestamp. 
 
-
-
 

-Next: summary start-date,
+Next: summary start-date,
 Previous: summary end-date,
 Up: summary Invocation
-
+

 
 
 output-directory option
@@ -158,13 +149,11 @@ This is the “output directory” option.
 This option takes a str argument. 
         The output directory summary will write all output files to. 
 
-
-
 

-Next: summary exit status,
+Next: summary exit status,
 Previous: summary output-directory,
 Up: summary Invocation
-
+

 
 
 start-date option
@@ -175,19 +164,18 @@ This option takes a num argument.
         Process all files with the date suffix more or equal to value of
         this option.  Defaults to 197000101. 
 
-
 

-Previous: summary start-date,
+Previous: summary start-date,
 Up: summary Invocation
-
+

 
 
 summary exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
 
 
diff --git a/scripts/summary.man.in b/scripts/summary.man.in
index ec39cfec0..d4011fb97 100644
--- a/scripts/summary.man.in
+++ b/scripts/summary.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH summary 1summaryman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH summary 1summaryman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-AMaaJG/ag-NMaiIG)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:22 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 04:56:06 PM by AutoGen 5.18.5
 .\" From the definitions summary-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/summary.mdoc.in b/scripts/summary.mdoc.in
index 3cc4109b9..6c8eee7f7 100644
--- a/scripts/summary.mdoc.in
+++ b/scripts/summary.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (summary-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:23 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:56:08 PM by AutoGen 5.18.5
 .\"  From the definitions    summary-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/update-leap/invoke-update-leap.texi b/scripts/update-leap/invoke-update-leap.texi
index 69ea0acfb..002193a18 100644
--- a/scripts/update-leap/invoke-update-leap.texi
+++ b/scripts/update-leap/invoke-update-leap.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-update-leap.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:41 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:55:50 PM by AutoGen 5.18.5
 # From the definitions    update-leap-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -71,6 +71,80 @@ with a status code of 0.
 @exampleindent 0
 @example
 
+Usage: update-leap [options]
+
+Verifies and if necessary, updates leap-second definition file
+
+All arguments are optional:  Default (or current value) shown:
+    -C    Absolute path to CA Cert (see SSL/TLS Considerations)
+    -D    Path to a CAdir (see SSL/TLS Considerations)
+    -e    Specify how long (in days) before expiration the file is to be
+              refreshed.  Note that larger values imply more frequent refreshes.
+          60
+    -F    Force update even if current file is OK and not close to expiring.
+    -f    Absolute path ntp.conf file (default /etc/ntp.conf)
+          /etc/ntp.conf
+    -h    show help
+    -i    Specify number of minutes between retries
+          10
+    -L    Absolute path to leapfile on the local system
+          (overrides value in ntp.conf)
+    -l    Specify the syslog(3) facility for logging
+          LOG_USER
+    -q    Only report errors (cannot be used with -v)
+    -r    Specify number of attempts to retrieve file
+          6
+    -s    Send output to syslog(3) - implied if STDOUT has no tty or redirected
+    -t    Send output to terminal - implied if STDOUT attached to terminal
+    -u    Specify the URL of the master copy to download
+          https://www.ietf.org/timezones/data/leap-seconds.list
+    -v    Verbose - show debug messages (cannot be used with -q)
+
+The following options are not (yet) implemented in the perl version:
+    -4    Use only IPv4
+    -6    Use only IPv6
+    -c    Command to restart NTP after installing a new file
+           - ntpd checks file daily
+    -p 4|6
+          Prefer IPv4 or IPv6 (as specified) addresses, but use either
+
+update-leap will validate the file currently on the local system.
+
+Ordinarily, the leapfile is found using the 'leapfile' directive in
+/etc/ntp.conf.  However, an alternate location can be specified on the
+command line with the -L flag.
+
+If the leapfile does not exist, is not valid, has expired, or is
+expiring soon, a new copy will be downloaded.  If the new copy is
+valid, it is installed.
+
+If the current file is acceptable, no download or restart occurs.
+
+This can be run as a cron job.  As the file is rarely updated, and
+leap seconds are announced at least one month in advance (usually
+longer), it need not be run more frequently than about once every
+three weeks.
+
+SSL/TLS Considerations
+-----------------------
+The perl modules can usually locate the CA certificate used to verify
+the peer's identity.
+
+On BSDs, the default is typically the file /etc/ssl/certs.pem.  On
+Linux, the location is typically a path to a CAdir - a directory of
+symlinks named according to a hash of the certificates' subject names.
+
+The -C or -D options are available to pass in a location if no CA cert
+is found in the default location.
+
+External Dependencies
+---------------------
+The following perl modules are required:
+HTTP::Tiny         - version >= 0.056
+IO::Socket::SSL - version >= 1.56
+NET::SSLeay         - version >= 1.49
+
+Version: 1.004
 @end example
 @exampleindent 4
 
diff --git a/scripts/update-leap/update-leap-opts b/scripts/update-leap/update-leap-opts
index abf498b3c..ef461c3e4 100644
--- a/scripts/update-leap/update-leap-opts
+++ b/scripts/update-leap/update-leap-opts
@@ -1,6 +1,6 @@
 # EDIT THIS FILE WITH CAUTION  (update-leap-opts)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:36:44 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 04:32:15 PM by AutoGen 5.18.5
 # From the definitions    update-leap-opts.def
 # and the template file   perlopt
 
@@ -46,7 +46,7 @@ sub processOptions {
         'help|?', 'more-help'));
 
     $usage = <<'USAGE';
-update-leap - leap-seconds file manager/updater - Ver. 4.2.8p10
+update-leap - leap-seconds file manager/updater - Ver. 4.2.8p11
 USAGE: update-leap [ - [] | --[{=| }] ]... 
 
     -s, --source-url=str         The URL of the master copy of the leapseconds file
diff --git a/scripts/update-leap/update-leap.1update-leapman b/scripts/update-leap/update-leap.1update-leapman
index ccca72b40..380774a8b 100644
--- a/scripts/update-leap/update-leap.1update-leapman
+++ b/scripts/update-leap/update-leap.1update-leapman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH update-leap 1update-leapman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH update-leap 1update-leapman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-cKaOWT/ag-pKaWVT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:15 AM by AutoGen 5.18.5
 .\" From the definitions update-leap-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/update-leap/update-leap.1update-leapmdoc b/scripts/update-leap/update-leap.1update-leapmdoc
index 6c7218bed..1af0cd3b8 100644
--- a/scripts/update-leap/update-leap.1update-leapmdoc
+++ b/scripts/update-leap/update-leap.1update-leapmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (update-leap-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:45 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:55:53 PM by AutoGen 5.18.5
 .\"  From the definitions    update-leap-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/scripts/update-leap/update-leap.html b/scripts/update-leap/update-leap.html
index b74c8ab99..030353037 100644
--- a/scripts/update-leap/update-leap.html
+++ b/scripts/update-leap/update-leap.html
@@ -3,7 +3,7 @@
 update-leap User's Manual
 
 
-
+
 
 
 
@@ -14,25 +14,23 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 update-leap User's Manual
 
-
 

-Next: update-leap Description,
+Next: update-leap Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
   This document describes the use of the NTP Project's update-leap program.
 
-  
This document applies to version 4.2.8p10 of update-leap.
+  
This document applies to version 4.2.8p11 of update-leap.
 
 

 Short Contents
@@ -46,11 +44,9 @@ Up: (dir)
 
 
 
-
-
 

-
-
+
+

 
 
 0.1 Invoking update-leap
@@ -86,7 +82,7 @@ This script depends on$REQUIREDCMDS
 using the agtexi-cmd template and the option descriptions for the update-leap program.
 
 
-update-leap usage:                   update-leap help/usage (--help)
+
update-leap usage:                   update-leap help/usage (--help)
 
update-leap source-url:              source-url option (-s)
 
update-leap ipv4:                    ipv4 option (-4)
 
update-leap destination:             destination option (-d)
@@ -99,37 +95,33 @@ using the agtexi-cmd template and the option descriptions for the <
 
 
 
-
-
 

-Next: update-leap source-url,
+Next: update-leap source-url,
 Up: update-leap Invocation
-
+

 
 
-0.1.1 update-leap help/usage (--help)
+0.1.1 update-leap help/usage (--help)
 
 
 This is the automatically generated usage text for update-leap.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
 
 
   
-
-
 

-Next: update-leap ipv4,
+Next: update-leap ipv4,
 Previous: update-leap usage,
 Up: update-leap Invocation
-
+

 
 
 0.1.2 source-url option (-s)
@@ -140,13 +132,11 @@ This option takes a string argument.
 Specify the URL of the master copy to download
 $LEAPSRC
 
-
-
 

-Next: update-leap destination,
+Next: update-leap destination,
 Previous: update-leap source-url,
 Up: update-leap Invocation
-
+

 
 
 0.1.3 ipv4 option (-4)
@@ -186,30 +176,26 @@ ipv6.
     doc         = <<-  _EndOfDoc_
 Prefer IPv4 or IPv6 (as specified) addresses, but use either. 
 
-
-
 

-Next: update-leap expiration,
+Next: update-leap expiration,
 Previous: update-leap ipv4,
 Up: update-leap Invocation
-
+

 
 
 0.1.4 destination option (-d)
 
 
 This is the “filename on the local system” option. 
-This option takes a string argument float. 
+This option takes a string argument float. 
 The name to use to store the leapfile on the local system. 
 $LEAPFILE
 

-
-
 

-Next: update-leap ntp-conf-file,
+Next: update-leap ntp-conf-file,
 Previous: update-leap destination,
 Up: update-leap Invocation
-
+

 
 
 0.1.5 expiration option (-e)
@@ -222,13 +208,11 @@ Units are required, e.g. "-e 60 days"  Note that larger values
 imply more frequent refreshes. 
 "$PREFETCH"
 
-
-
 

-Next: update-leap force-update,
+Next: update-leap force-update,
 Previous: update-leap expiration,
 Up: update-leap Invocation
-
+

 
 
 0.1.6 ntp-conf-file option (-f)
@@ -240,13 +224,11 @@ Specify location of ntp.conf (used to make sure leapfile directive is
 present and to default  leapfile)
 /etc/ntp.conf
 
-
-
 

-Next: update-leap exit status,
+Next: update-leap exit status,
 Previous: update-leap ntp-conf-file,
 Up: update-leap Invocation
-
+

 
 
 0.1.7 force-update option (-F)
@@ -255,41 +237,35 @@ Up: update-lea
 This is the “force update of the leapfile” option. 
 Force update even if current file is OK and not close to expiring. 
 
-
-
 

-Next: update-leap Usage,
+Next: update-leap Usage,
 Previous: update-leap force-update,
 Up: update-leap Invocation
-
+

 
 
 0.1.8 update-leap exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
 
   
-
-
 

-Next: update-leap Authors,
+Next: update-leap Authors,
 Previous: update-leap exit status,
 Up: update-leap Invocation
-
+

 
 
 0.1.9 update-leap Usage
 
 
-
-
 

-Previous: update-leap Usage,
+Previous: update-leap Usage,
 Up: update-leap Invocation
-
+

 
 
 0.1.10 update-leap Authors
diff --git a/scripts/update-leap/update-leap.man.in b/scripts/update-leap/update-leap.man.in
index ccca72b40..380774a8b 100644
--- a/scripts/update-leap/update-leap.man.in
+++ b/scripts/update-leap/update-leap.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH update-leap 1update-leapman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH update-leap 1update-leapman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-cKaOWT/ag-pKaWVT)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:36:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 10:50:15 AM by AutoGen 5.18.5
 .\" From the definitions update-leap-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/scripts/update-leap/update-leap.mdoc.in b/scripts/update-leap/update-leap.mdoc.in
index 6c7218bed..1af0cd3b8 100644
--- a/scripts/update-leap/update-leap.mdoc.in
+++ b/scripts/update-leap/update-leap.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (update-leap-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:36:45 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 04:55:53 PM by AutoGen 5.18.5
 .\"  From the definitions    update-leap-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/sntp/invoke-sntp.texi b/sntp/invoke-sntp.texi
index 2d039247b..a79b62faf 100644
--- a/sntp/invoke-sntp.texi
+++ b/sntp/invoke-sntp.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-sntp.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:23:24 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 05:13:11 PM by AutoGen 5.18.5
 # From the definitions    sntp-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -101,58 +101,62 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p10
-Usage:  sntp [ - [] | --[@{=| @}] ]... \
+sntp - standard Simple Network Time Protocol client program - Ver. 4.2.7p245
+USAGE:  sntp [ - [] | --[@{=| @}] ]... \
                 [ hostname-or-IP ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 DNS name resolution
-                                - prohibits the option 'ipv6'
+                                - prohibits these options:
+                                ipv6
    -6 no  ipv6           Force IPv6 DNS name resolution
-                                - prohibits the option 'ipv4'
-   -a Num authentication Enable authentication with the key auth-keynumber
+                                - prohibits these options:
+                                ipv4
+   -a Num authentication Enable authentication with the key @@var@{auth-keynumber@}
+   -B Num bctimeout      The number of seconds to wait for broadcasts
    -b Str broadcast      Listen to the address specified for broadcast time sync
                                 - may appear multiple times
    -c Str concurrent     Concurrently query all IPs returned for host-name
                                 - may appear multiple times
    -d no  debug-level    Increase debug verbosity level
                                 - may appear multiple times
-   -D Num set-debug-level Set the debug verbosity level
+   -D Str set-debug-level Set the debug verbosity level
                                 - may appear multiple times
    -g Num gap            The gap (in milliseconds) between time requests
    -K Fil kod            KoD history filename
-   -k Fil keyfile        Look in this file for the key specified with -a
+   -k Fil keyfile        Look in this file for the key specified with @@option@{-a@}
    -l Fil logfile        Log to specified logfile
-   -M Num steplimit      Adjustments less than steplimit msec will be slewed
-                                - it must be in the range:
+   -M Num steplimit      Adjustments less than @@var@{steplimit@} msec will be slewed
+                                - It must be in the range:
                                   greater than or equal to 0
-   -o Num ntpversion     Send int as our NTP protocol version
-                                - it must be in the range:
+   -o Num ntpversion     Send @@var@{int@} as our NTP version
+                                - It must be in the range:
                                   0 to 7
    -r no  usereservedport Use the NTP Reserved Port (port 123)
-   -S no  step           OK to 'step' the time with settimeofday(2)
-   -s no  slew           OK to 'slew' the time with adjtime(2)
-   -t Num timeout        The number of seconds to wait for responses
+   -S no  step           OK to 'step' the time with @@command@{settimeofday(2)@}
+   -s no  slew           OK to 'slew' the time with @@command@{adjtime(2)@}
+   -u Num uctimeout      The number of seconds to wait for unicast responses
       no  wait           Wait for pending replies (if not setting the time)
-                                - disabled as '--no-wait'
+                                - disabled as --no-wait
                                 - enabled by default
-      opt version        output version information and exit
-   -? no  help           display extended usage information and exit
-   -! no  more-help      extended usage information passed thru pager
-   -> opt save-opts      save the option state to a config file
-   -< Str load-opts      load options from a config file
-                                - disabled as '--no-load-opts'
+      opt version        Output version information and exit
+   -? no  help           Display extended usage information and exit
+   -! no  more-help      Extended usage information passed thru pager
+   -> opt save-opts      Save the option state to a config file
+   -< Str load-opts      Load options from a config file
+                                - disabled as --no-load-opts
                                 - may appear multiple times
 
 Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
 
+
 The following option preset mechanisms are supported:
  - reading file $HOME/.ntprc
  - reading file ./.ntprc
  - examining environment variables named SNTP_*
 
-Please send bug reports to:  
+please send bug reports to:  http://bugs.ntp.org, bugs@@ntp.org
 @end example
 @exampleindent 4
 
diff --git a/sntp/sntp-opts.c b/sntp/sntp-opts.c
index 969ad9f14..404068a27 100644
--- a/sntp/sntp-opts.c
+++ b/sntp/sntp-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (sntp-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:23:09 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 10:25:32 AM by AutoGen 5.18.5
  *  From the definitions    sntp-opts.def
  *  and the template file   options
  *
@@ -70,7 +70,7 @@ extern FILE * option_usage_fp;
  *  static const strings for sntp options
  */
 static char const sntp_opt_strs[2566] =
-/*     0 */ "sntp 4.2.8p10\n"
+/*     0 */ "sntp 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -156,7 +156,7 @@ static char const sntp_opt_strs[2566] =
 /*  2313 */ "LOAD_OPTS\0"
 /*  2323 */ "no-load-opts\0"
 /*  2336 */ "SNTP\0"
-/*  2341 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p10\n"
+/*  2341 */ "sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]... \\\n"
             "\t\t[ hostname-or-IP ...]\n\0"
 /*  2501 */ "$HOME\0"
@@ -164,7 +164,7 @@ static char const sntp_opt_strs[2566] =
 /*  2509 */ ".ntprc\0"
 /*  2516 */ "http://bugs.ntp.org, bugs@ntp.org\0"
 /*  2550 */ "\n\0"
-/*  2552 */ "sntp 4.2.8p10";
+/*  2552 */ "sntp 4.2.8p11";
 
 /**
  *  ipv4 option description with
@@ -1176,7 +1176,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via sntpOptions.pzCopyright */
-  puts(_("sntp 4.2.8p10\n\
+  puts(_("sntp 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -1266,7 +1266,7 @@ implied warranty.\n"));
   puts(_("load options from a config file"));
 
   /* referenced via sntpOptions.pzUsageTitle */
-  puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p10\n\
+  puts(_("sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]... \\\n\
 \t\t[ hostname-or-IP ...]\n"));
 
@@ -1274,7 +1274,7 @@ Usage:  %s [ - [] | --[{=| }] ]... \\\n\
   puts(_("\n"));
 
   /* referenced via sntpOptions.pzFullVersion */
-  puts(_("sntp 4.2.8p10"));
+  puts(_("sntp 4.2.8p11"));
 
   /* referenced via sntpOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/sntp/sntp-opts.h b/sntp/sntp-opts.h
index 30594a8d6..25e2fe81b 100644
--- a/sntp/sntp-opts.h
+++ b/sntp/sntp-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (sntp-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:23:09 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 10:25:31 AM by AutoGen 5.18.5
  *  From the definitions    sntp-opts.def
  *  and the template file   options
  *
@@ -91,9 +91,9 @@ typedef enum {
 /** count of all options for sntp */
 #define OPTION_CT    23
 /** sntp version */
-#define SNTP_VERSION       "4.2.8p10"
+#define SNTP_VERSION       "4.2.8p11"
 /** Full sntp version text */
-#define SNTP_FULL_VERSION  "sntp 4.2.8p10"
+#define SNTP_FULL_VERSION  "sntp 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/sntp/sntp.1sntpman b/sntp/sntp.1sntpman
index d6f9731ac..8378d45b4 100644
--- a/sntp/sntp.1sntpman
+++ b/sntp/sntp.1sntpman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH sntp 1sntpman "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH sntp 1sntpman "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-eaayfN/ag-qaaqeN)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:23:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:13:07 PM by AutoGen 5.18.5
 .\" From the definitions sntp-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/sntp/sntp.1sntpmdoc b/sntp/sntp.1sntpmdoc
index 561a953db..dbe110392 100644
--- a/sntp/sntp.1sntpmdoc
+++ b/sntp/sntp.1sntpmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (sntp-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:23:22 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:13:14 PM by AutoGen 5.18.5
 .\"  From the definitions    sntp-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/sntp/sntp.html b/sntp/sntp.html
index dd7139101..912150474 100644
--- a/sntp/sntp.html
+++ b/sntp/sntp.html
@@ -3,7 +3,7 @@
 Sntp User's Manual
 
 
-
+
 
 
 
@@ -14,20 +14,18 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
 Sntp User's Manual
 
-
 

-Next: sntp Description,
+Next: sntp Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 Simple Network Time Protocol User Manual
@@ -38,7 +36,7 @@ display the time offset of the system clock relative to the server
 clock.  Run as root, it can correct the system clock to this offset as
 well.  It can be run as an interactive command or from a cron job.
 
-  This document applies to version 4.2.8p10 of sntp.
+  
This document applies to version 4.2.8p11 of sntp.
 
   
The program implements the SNTP protocol as defined by RFC 5905, the NTPv4
 IETF specification.
@@ -57,10 +55,9 @@ IETF specification.
 
 
 

-
 

-
-
+
+

 
 
 
@@ -79,10 +76,9 @@ the +4.567 +/- 0.089 secs indicates the time offset and
 error bound of the system clock relative to the server clock.
 
 
-
 

-
-
+
+

 
 
 Invoking sntp
@@ -139,7 +135,7 @@ using the agtexi-cmd template and the option descriptions for the <
 This software is released under the NTP license, <http://ntp.org/license>.
 
 
-sntp usage:                   sntp help/usage (--help)
+
sntp usage:                   sntp help/usage (--help)
 
sntp ipv4:                    ipv4 option (-4)
 
sntp ipv6:                    ipv6 option (-6)
 
sntp authentication:          authentication option (-a)
@@ -161,86 +157,88 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
 

-Next: sntp ipv4,
+Next: sntp ipv4,
 Up: sntp Invocation
-
+

 
 
-sntp help/usage (--help)
+sntp help/usage (--help)
 
 
 This is the automatically generated usage text for sntp.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
sntp - standard Simple Network Time Protocol client program - Ver. 4.2.8p10
-Usage:  sntp [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
+sntp - standard Simple Network Time Protocol client program - Ver. 4.2.7p245
+USAGE:  sntp [ -<flag> [<val>] | --<name>[{=| }<val>] ]... \
                 [ hostname-or-IP ...]
   Flg Arg Option-Name    Description
    -4 no  ipv4           Force IPv4 DNS name resolution
-                                - prohibits the option 'ipv6'
+                                - prohibits these options:
+                                ipv6
    -6 no  ipv6           Force IPv6 DNS name resolution
-                                - prohibits the option 'ipv4'
-   -a Num authentication Enable authentication with the key auth-keynumber
+                                - prohibits these options:
+                                ipv4
+   -a Num authentication Enable authentication with the key @var{auth-keynumber}
+   -B Num bctimeout      The number of seconds to wait for broadcasts
    -b Str broadcast      Listen to the address specified for broadcast time sync
                                 - may appear multiple times
    -c Str concurrent     Concurrently query all IPs returned for host-name
                                 - may appear multiple times
    -d no  debug-level    Increase debug verbosity level
                                 - may appear multiple times
-   -D Num set-debug-level Set the debug verbosity level
+   -D Str set-debug-level Set the debug verbosity level
                                 - may appear multiple times
    -g Num gap            The gap (in milliseconds) between time requests
    -K Fil kod            KoD history filename
-   -k Fil keyfile        Look in this file for the key specified with -a
+   -k Fil keyfile        Look in this file for the key specified with @option{-a}
    -l Fil logfile        Log to specified logfile
-   -M Num steplimit      Adjustments less than steplimit msec will be slewed
-                                - it must be in the range:
+   -M Num steplimit      Adjustments less than @var{steplimit} msec will be slewed
+                                - It must be in the range:
                                   greater than or equal to 0
-   -o Num ntpversion     Send int as our NTP protocol version
-                                - it must be in the range:
+   -o Num ntpversion     Send @var{int} as our NTP version
+                                - It must be in the range:
                                   0 to 7
    -r no  usereservedport Use the NTP Reserved Port (port 123)
-   -S no  step           OK to 'step' the time with settimeofday(2)
-   -s no  slew           OK to 'slew' the time with adjtime(2)
-   -t Num timeout        The number of seconds to wait for responses
+   -S no  step           OK to 'step' the time with @command{settimeofday(2)}
+   -s no  slew           OK to 'slew' the time with @command{adjtime(2)}
+   -u Num uctimeout      The number of seconds to wait for unicast responses
       no  wait           Wait for pending replies (if not setting the time)
-                                - disabled as '--no-wait'
+                                - disabled as --no-wait
                                 - enabled by default
-      opt version        output version information and exit
-   -? no  help           display extended usage information and exit
-   -! no  more-help      extended usage information passed thru pager
-   -> opt save-opts      save the option state to a config file
-   -< Str load-opts      load options from a config file
-                                - disabled as '--no-load-opts'
+      opt version        Output version information and exit
+   -? no  help           Display extended usage information and exit
+   -! no  more-help      Extended usage information passed thru pager
+   -> opt save-opts      Save the option state to a config file
+   -< Str load-opts      Load options from a config file
+                                - disabled as --no-load-opts
                                 - may appear multiple times
 
 Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
 
+
 The following option preset mechanisms are supported:
  - reading file $HOME/.ntprc
  - reading file ./.ntprc
  - examining environment variables named SNTP_*
 
-Please send bug reports to:  <http://bugs.ntp.org, bugs@ntp.org>
+please send bug reports to:  http://bugs.ntp.org, bugs@ntp.org
 
   
-
 

-Next: sntp ipv6,
+Next: sntp ipv6,
 Previous: sntp usage,
 Up: sntp Invocation
-
+

 
 
 ipv4 option (-4)
@@ -257,12 +255,11 @@ ipv6.
   Force DNS resolution of the following host names on the command line
 to the IPv4 namespace. 
 

-
 

-Next: sntp authentication,
+Next: sntp authentication,
 Previous: sntp ipv4,
 Up: sntp Invocation
-
+

 
 
 ipv6 option (-6)
@@ -279,37 +276,35 @@ ipv4.
   Force DNS resolution of the following host names on the command line
 to the IPv6 namespace. 
 

-
 

-Next: sntp broadcast,
+Next: sntp broadcast,
 Previous: sntp ipv6,
 Up: sntp Invocation
-
+

 
 
 authentication option (-a)
 
 
 This is the “enable authentication with the key auth-keynumber” option. 
-This option takes a number argument auth-keynumber. 
+This option takes a number argument auth-keynumber. 
 Enable authentication using the key specified in this option's
-argument.  The argument of this option is the keyid, a
-number specified in the keyfile as this key's identifier. 
-See the keyfile option (-k) for more details. 
+argument.  The argument of this option is the keyid, a
+number specified in the keyfile as this key's identifier. 
+See the keyfile option (-k) for more details. 
 

-
 

-Next: sntp concurrent,
+Next: sntp concurrent,
 Previous: sntp authentication,
 Up: sntp Invocation
-
+

 
 
 broadcast option (-b)
 
 
 This is the “listen to the address specified for broadcast time sync” option. 
-This option takes a string argument broadcast-address.
+This option takes a string argument broadcast-address.
 
 
This option has some usage constraints.  It:
      

@@ -318,21 +313,20 @@ This option takes a string argument broadcast-addressIf specified sntp will listen to the specified address
 for NTP broadcasts.  The default maximum wait time
-can (and probably should) be modified with -t. 
+can (and probably should) be modified with -t. 
 
-
 

-Next: sntp gap,
+Next: sntp gap,
 Previous: sntp broadcast,
 Up: sntp Invocation
-
+

 
 
 concurrent option (-c)
 
 
 This is the “concurrently query all ips returned for host-name” option. 
-This option takes a string argument host-name.
+This option takes a string argument host-name.
 
 
This option has some usage constraints.  It:
      

@@ -345,85 +339,80 @@ as part of a DNS lookup are assumed to be for a single instance of
 ntpd, and therefore sntp will send queries to these IPs
 one after another, with a 2-second gap in between each query.
 
-  The -c or --concurrent flag says that any IPs
+  
The -c or --concurrent flag says that any IPs
 returned for the DNS lookup of the supplied host-name are on
 different machines, so we can send concurrent queries. 
 

-
 

-Next: sntp kod,
+Next: sntp kod,
 Previous: sntp concurrent,
 Up: sntp Invocation
-
+

 
 
 gap option (-g)
 
 
 This is the “the gap (in milliseconds) between time requests” option. 
-This option takes a number argument milliseconds. 
+This option takes a number argument milliseconds. 
 Since we're only going to use the first valid response we get and
 there is benefit to specifying a good number of servers to query,
 separate the queries we send out by the specified number of
 milliseconds. 
 

-
 

-Next: sntp keyfile,
+Next: sntp keyfile,
 Previous: sntp gap,
 Up: sntp Invocation
-
+

 
 
 kod option (-K)
 
 
 This is the “kod history filename” option. 
-This option takes a file argument file-name. 
+This option takes a file argument file-name. 
 Specifies the filename to be used for the persistent history of KoD
 responses received from servers.  If the file does not exist, a
 warning message will be displayed.  The file will not be created. 
 

-
 

-Next: sntp logfile,
+Next: sntp logfile,
 Previous: sntp kod,
 Up: sntp Invocation
-
+

 
 
 keyfile option (-k)
 
 
-This is the “look in this file for the key specified with -a” option. 
-This option takes a file argument file-name. 
+This is the “look in this file for the key specified with -a” option. 
+This option takes a file argument file-name. 
 This option specifies the keyfile. 
-sntp will search for the key specified with -a
-keyno in this file.  See ntp.keys(5) for more
+sntp will search for the key specified with -a
+keyno in this file.  See ntp.keys(5) for more
 information. 
 

-
 

-Next: sntp steplimit,
+Next: sntp steplimit,
 Previous: sntp keyfile,
 Up: sntp Invocation
-
+

 
 
 logfile option (-l)
 
 
 This is the “log to specified logfile” option. 
-This option takes a file argument file-name. 
+This option takes a file argument file-name. 
 This option causes the client to write log messages to the specified
-logfile. 
+logfile. 
 

-
 

-Next: sntp ntpversion,
+Next: sntp ntpversion,
 Previous: sntp logfile,
 Up: sntp Invocation
-
+

 
 
 steplimit option (-M)
@@ -431,18 +420,17 @@ Up: sntp Invocation
 
 This is the “adjustments less than steplimit msec will be slewed” option. 
 This option takes a number argument. 
-If the time adjustment is less than steplimit milliseconds,
-slew the amount using adjtime(2).  Otherwise, step the
-correction using settimeofday(2).  The default value is 0,
+If the time adjustment is less than steplimit milliseconds,
+slew the amount using adjtime(2).  Otherwise, step the
+correction using settimeofday(2).  The default value is 0,
 which means all adjustments will be stepped.  This is a feature, as
 different situations demand different values. 
 

-
 

-Next: sntp usereservedport,
+Next: sntp usereservedport,
 Previous: sntp steplimit,
 Up: sntp Invocation
-
+

 
 
 ntpversion option (-o)
@@ -451,14 +439,13 @@ Up: sntp Invocation
 This is the “send int as our ntp protocol version” option. 
 This option takes a number argument. 
 When sending requests to a remote server, tell them we are running
-NTP protocol version ntpversion . 
+NTP protocol version ntpversion . 
 
-
 

-Next: sntp timeout,
+Next: sntp timeout,
 Previous: sntp ntpversion,
 Up: sntp Invocation
-
+

 
 
 usereservedport option (-r)
@@ -468,31 +455,29 @@ This is the “use the ntp reserved port (port 123)” option.
 Use port 123, which is reserved for NTP, for our network
 communications. 
 
-
 

-Next: sntp wait,
+Next: sntp wait,
 Previous: sntp usereservedport,
 Up: sntp Invocation
-
+

 
 
 timeout option (-t)
 
 
 This is the “the number of seconds to wait for responses” option. 
-This option takes a number argument seconds. 
+This option takes a number argument seconds. 
 When waiting for a reply, sntp will wait the number
 of seconds specified before giving up.  The default should be
 more than enough for a unicast response.  If sntp is
 only waiting for a broadcast response a longer timeout is
 likely needed. 
 

-
 

-Next: sntp config,
+Next: sntp config,
 Previous: sntp timeout,
 Up: sntp Invocation
-
+

 
 
 wait option
@@ -509,12 +494,11 @@ This is the “wait for pending replies (if not setting the time)” opt
   If we are not setting the time, wait for all pending responses.
 
 

-
 

-Next: sntp exit status,
+Next: sntp exit status,
 Previous: sntp wait,
 Up: sntp Invocation
-
+

 
 
 presetting/configuring sntp
@@ -532,9 +516,9 @@ values are treated like option arguments.
 $PWD
 
   The environment variables HOME, and PWD
-are expanded and replaced when sntp runs. 
+are expanded and replaced when sntp runs. 
 For any of these that are plain files, they are simply processed. 
-For any that are directories, then a file named .ntprc is searched for
+For any that are directories, then a file named .ntprc is searched for
 within that directory and processed.
 
   Configuration files may be in a wide variety of formats. 
@@ -576,56 +560,52 @@ detail to provide.  The default is to print just the version.  The licensing inf
 Only the first letter of the argument is examined:
 
      

-‘version’
Only print the version.  This is the default. 
-
‘copyright’
Name the copyright usage licensing terms. 
-
‘verbose’
Print the full copyright usage licensing terms. 
+
version
Only print the version.  This is the default. 
+
copyright
Name the copyright usage licensing terms. 
+
verbose
Print the full copyright usage licensing terms. 
 
 
 
-
 

-Next: sntp Usage,
+Next: sntp Usage,
 Previous: sntp config,
 Up: sntp Invocation
-
+

 
 
 sntp exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
-
‘66 (EX_NOINPUT)’
A specified configuration file could not be loaded. 
-
‘70 (EX_SOFTWARE)’
libopts had an internal operational error.  Please report
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
+
66 (EX_NOINPUT)
A specified configuration file could not be loaded. 
+
70 (EX_SOFTWARE)
libopts had an internal operational error.  Please report
 it to autogen-users@lists.sourceforge.net.  Thank you. 
 
   
-
 

-Next: sntp Authors,
+Next: sntp Authors,
 Previous: sntp exit status,
 Up: sntp Invocation
-
+

 
 
 sntp Usage
 
 
-
 

-Previous: sntp Usage,
+Previous: sntp Usage,
 Up: sntp Invocation
-
+

 
 
 sntp Authors
 
 
-
 

-
-
+
+

 
 
 
diff --git a/sntp/sntp.man.in b/sntp/sntp.man.in
index 573bf534d..9156d05c1 100644
--- a/sntp/sntp.man.in
+++ b/sntp/sntp.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH sntp @SNTP_MS@ "27 Feb 2018" "4.2.8p10" "User Commands"
+.TH sntp @SNTP_MS@ "27 Feb 2018" "4.2.8p11" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-eaayfN/ag-qaaqeN)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:23:25 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:13:07 PM by AutoGen 5.18.5
 .\" From the definitions sntp-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/sntp/sntp.mdoc.in b/sntp/sntp.mdoc.in
index 959069c2d..a5f90952d 100644
--- a/sntp/sntp.mdoc.in
+++ b/sntp/sntp.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (sntp-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:23:22 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:13:14 PM by AutoGen 5.18.5
 .\"  From the definitions    sntp-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/util/invoke-ntp-keygen.texi b/util/invoke-ntp-keygen.texi
index 58d842a21..2a8d401d1 100644
--- a/util/invoke-ntp-keygen.texi
+++ b/util/invoke-ntp-keygen.texi
@@ -6,7 +6,7 @@
 #
 # EDIT THIS FILE WITH CAUTION  (invoke-ntp-keygen.texi)
 #
-# It has been AutoGen-ed  February 27, 2018 at 07:26:42 AM by AutoGen 5.18.5
+# It has been AutoGen-ed  February 27, 2018 at 05:15:57 PM by AutoGen 5.18.5
 # From the definitions    ntp-keygen-opts.def
 # and the template file   agtexi-cmd.tpl
 @end ignore
@@ -1056,17 +1056,14 @@ with a status code of 0.
 
 @exampleindent 0
 @example
-ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p10
-Usage:  ntp-keygen [ - [] | --[@{=| @}] ]...
+ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.7p245
+USAGE:  ntp-keygen [ - [] | --[@{=| @}] ]...
   Flg Arg Option-Name    Description
-   -b Num imbits         identity modulus bits
-                                - it must be in the range:
-                                  256 to 2048
    -c Str certificate    certificate scheme
    -C Str cipher         privatekey cipher
    -d no  debug-level    Increase debug verbosity level
                                 - may appear multiple times
-   -D Num set-debug-level Set the debug verbosity level
+   -D Str set-debug-level Set the debug verbosity level
                                 - may appear multiple times
    -e no  id-key         Write IFF or GQ identity keys
    -G no  gq-params      Generate GQ parameters and keys
@@ -1074,36 +1071,37 @@ Usage:  ntp-keygen [ - [] | --[@{=| @}] ]...
    -I no  iffkey         generate IFF parameters
    -i Str ident          set Autokey group name
    -l Num lifetime       set certificate lifetime
-   -m Num modulus        prime modulus
-                                - it must be in the range:
+   -M no  md5key         generate MD5 keys
+   -m Num modulus        modulus
+                                - It must be in the range:
                                   256 to 2048
-   -M no  md5key         generate symmetric keys
    -P no  pvt-cert       generate PC private certificate
-   -p Str password       local private password
-   -q Str export-passwd  export IFF or GQ group keys with password
-   -s Str subject-name   set host and optionally group name
+   -p Str pvt-passwd     output private password
+   -q Str get-pvt-passwd input private password
    -S Str sign-key       generate sign key (RSA or DSA)
+   -s Str subject-name   set host and optionally group name
    -T no  trusted-cert   trusted certificate (TC scheme)
    -V Num mv-params      generate  MV parameters
    -v Num mv-keys        update  MV keys
-      opt version        output version information and exit
-   -? no  help           display extended usage information and exit
-   -! no  more-help      extended usage information passed thru pager
-   -> opt save-opts      save the option state to a config file
-   -< Str load-opts      load options from a config file
-                                - disabled as '--no-load-opts'
+      opt version        Output version information and exit
+   -? no  help           Display extended usage information and exit
+   -! no  more-help      Extended usage information passed thru pager
+   -> opt save-opts      Save the option state to a config file
+   -< Str load-opts      Load options from a config file
+                                - disabled as --no-load-opts
                                 - may appear multiple times
 
 Options are specified by doubled hyphens and their name or by a single
 hyphen and the flag character.
 
 
+
 The following option preset mechanisms are supported:
  - reading file $HOME/.ntprc
  - reading file ./.ntprc
  - examining environment variables named NTP_KEYGEN_*
 
-Please send bug reports to:  
+please send bug reports to:  http://bugs.ntp.org, bugs@@ntp.org
 @end example
 @exampleindent 4
 
diff --git a/util/ntp-keygen-opts.c b/util/ntp-keygen-opts.c
index 0f632abdd..6c07f973d 100644
--- a/util/ntp-keygen-opts.c
+++ b/util/ntp-keygen-opts.c
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntp-keygen-opts.c)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:35 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:44 PM by AutoGen 5.18.5
  *  From the definitions    ntp-keygen-opts.def
  *  and the template file   options
  *
@@ -72,7 +72,7 @@ extern FILE * option_usage_fp;
  *  static const strings for ntp-keygen options
  */
 static char const ntp_keygen_opt_strs[2442] =
-/*     0 */ "ntp-keygen (ntp) 4.2.8p10\n"
+/*     0 */ "ntp-keygen (ntp) 4.2.8p11\n"
             "Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n"
             "This is free software. It is licensed for use, modification and\n"
             "redistribution under the terms of the NTP License, copies of which\n"
@@ -165,14 +165,14 @@ static char const ntp_keygen_opt_strs[2442] =
 /*  2223 */ "no-load-opts\0"
 /*  2236 */ "no\0"
 /*  2239 */ "NTP_KEYGEN\0"
-/*  2250 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p10\n"
+/*  2250 */ "ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p11\n"
             "Usage:  %s [ - [] | --[{=| }] ]...\n\0"
 /*  2365 */ "$HOME\0"
 /*  2371 */ ".\0"
 /*  2373 */ ".ntprc\0"
 /*  2380 */ "http://bugs.ntp.org, bugs@ntp.org\0"
 /*  2414 */ "\n\0"
-/*  2416 */ "ntp-keygen (ntp) 4.2.8p10";
+/*  2416 */ "ntp-keygen (ntp) 4.2.8p11";
 
 /**
  *  imbits option description:
@@ -1310,7 +1310,7 @@ static void bogus_function(void) {
      translate option names.
    */
   /* referenced via ntp_keygenOptions.pzCopyright */
-  puts(_("ntp-keygen (ntp) 4.2.8p10\n\
+  puts(_("ntp-keygen (ntp) 4.2.8p11\n\
 Copyright (C) 1992-2017 The University of Delaware and Network Time Foundation, all rights reserved.\n\
 This is free software. It is licensed for use, modification and\n\
 redistribution under the terms of the NTP License, copies of which\n\
@@ -1409,14 +1409,14 @@ implied warranty.\n"));
   puts(_("load options from a config file"));
 
   /* referenced via ntp_keygenOptions.pzUsageTitle */
-  puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p10\n\
+  puts(_("ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p11\n\
 Usage:  %s [ - [] | --[{=| }] ]...\n"));
 
   /* referenced via ntp_keygenOptions.pzExplain */
   puts(_("\n"));
 
   /* referenced via ntp_keygenOptions.pzFullVersion */
-  puts(_("ntp-keygen (ntp) 4.2.8p10"));
+  puts(_("ntp-keygen (ntp) 4.2.8p11"));
 
   /* referenced via ntp_keygenOptions.pzFullUsage */
   puts(_("<<>>"));
diff --git a/util/ntp-keygen-opts.h b/util/ntp-keygen-opts.h
index a167c83cd..ab9e8ca36 100644
--- a/util/ntp-keygen-opts.h
+++ b/util/ntp-keygen-opts.h
@@ -1,7 +1,7 @@
 /*
  *  EDIT THIS FILE WITH CAUTION  (ntp-keygen-opts.h)
  *
- *  It has been AutoGen-ed  February 27, 2018 at 07:26:35 AM by AutoGen 5.18.5
+ *  It has been AutoGen-ed  February 27, 2018 at 05:15:43 PM by AutoGen 5.18.5
  *  From the definitions    ntp-keygen-opts.def
  *  and the template file   options
  *
@@ -94,9 +94,9 @@ typedef enum {
 /** count of all options for ntp-keygen */
 #define OPTION_CT    26
 /** ntp-keygen version */
-#define NTP_KEYGEN_VERSION       "4.2.8p10"
+#define NTP_KEYGEN_VERSION       "4.2.8p11"
 /** Full ntp-keygen version text */
-#define NTP_KEYGEN_FULL_VERSION  "ntp-keygen (ntp) 4.2.8p10"
+#define NTP_KEYGEN_FULL_VERSION  "ntp-keygen (ntp) 4.2.8p11"
 
 /**
  *  Interface defines for all options.  Replace "n" with the UPPER_CASED
diff --git a/util/ntp-keygen.1ntp-keygenman b/util/ntp-keygen.1ntp-keygenman
index ee5967c1b..5b942d89a 100644
--- a/util/ntp-keygen.1ntp-keygenman
+++ b/util/ntp-keygen.1ntp-keygenman
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntp-keygen 1ntp-keygenman "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntp-keygen 1ntp-keygenman "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-bBa46V/ag-nBaW5V)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:53 PM by AutoGen 5.18.5
 .\" From the definitions ntp-keygen-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/util/ntp-keygen.1ntp-keygenmdoc b/util/ntp-keygen.1ntp-keygenmdoc
index 4133c579c..ba2108764 100644
--- a/util/ntp-keygen.1ntp-keygenmdoc
+++ b/util/ntp-keygen.1ntp-keygenmdoc
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntp-keygen-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:40 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:16:00 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp-keygen-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
diff --git a/util/ntp-keygen.html b/util/ntp-keygen.html
index 52110afd8..854d055ca 100644
--- a/util/ntp-keygen.html
+++ b/util/ntp-keygen.html
@@ -3,7 +3,7 @@
 Ntp-keygen User's Manual
 
 
-
+
 
 
 
@@ -14,9 +14,8 @@
   pre.smallformat  { font-family:inherit; font-size:smaller }
   pre.smallexample { font-size:smaller }
   pre.smalllisp    { font-size:smaller }
-  span.sc    { font-variant:small-caps }
-  span.roman { font-family:serif; font-weight:normal; } 
-  span.sansserif { font-family:sans-serif; font-weight:normal; } 
+  span.sc { font-variant:small-caps }
+  span.roman { font-family: serif; font-weight: normal; } 
 -->
 
 
@@ -32,10 +31,9 @@
 
 
 
-
 

-Up: (dir)
-
+Up: (dir)
+

 
 
 Top
@@ -49,12 +47,11 @@ Up: (dir)
 
 
 
-
 

-Next: Description,
+Next: Description,
 Previous: (dir),
 Up: (dir)
-
+

 
 
 NTP Key Generation Program User Manual
@@ -73,15 +70,14 @@ All other files are in PEM-encoded
 printable ASCII format so they can be embedded as MIME attachments in
 mail to other sites.
 
-  This document applies to version 4.2.8p10 of ntp-keygen.
+  
This document applies to version 4.2.8p11 of ntp-keygen.
 
 

-
 

-Next: Running the Program,
+Next: Running the Program,
 Previous: Top,
 Up: Top
-
+

 
 
 
@@ -154,12 +150,11 @@ generating host and filestamp,
 as described in the Cryptographic Data Files section below.
 
 
-
 

-Next: Random Seed File,
+Next: Random Seed File,
 Previous: Description,
 Up: Top
-
+

 
 
 
@@ -211,11 +206,9 @@ certificate should be re-generated.
 Autokey Public-Key Authentication page.
 
 
-
-
 

-
-
+
+

 
 
 Invoking ntp-keygen
@@ -301,16 +294,16 @@ these files can be read by that host with no explicit password.
 used only by that host, although exceptions exist as noted later on
 this page. 
 The symmetric keys file, normally called
-ntp.keys,
+ntp.keys,
 is usually installed in
-/etc. 
+/etc. 
 Other files and links are usually installed in
-/usr/local/etc,
+/usr/local/etc,
 which is normally in a shared filesystem in
 NFS-mounted networks and cannot be changed by shared clients. 
 In these cases, NFS clients can specify the files in another
 directory such as
-/etc
+/etc
 using the
 keysdir
 ntpd(1ntpdmdoc)
@@ -318,13 +311,13 @@ configuration file command.
 
   This program directs commentary and error messages to the standard
 error stream
-stderr
+stderr
 and remote files to the standard output stream
-stdout
+stdout
 where they can be piped to other applications or redirected to files. 
 The names used for generated files and links all begin with the
 string
-ntpkey*
+ntpkey*
 and include the file type, generating host and filestamp,
 as described in the
 Cryptographic Data Files
@@ -338,16 +331,16 @@ program is logged in directly as root.
 The recommended procedure is change to the
 keys
 directory, usually
-/usr/local/etc,
+/usr/local/etc,
 then run the program.
 
   
To test and gain experience with Autokey concepts, log in as root and
 change to the
 keys
 directory, usually
-/usr/local/etc. 
+/usr/local/etc. 
 When run for the first time, or if all files with names beginning with
-ntpkey*
+ntpkey*
 have been removed, use the
 ntp-keygen
 command without arguments to generate a default
@@ -407,22 +400,22 @@ as the other files, are probably not compatible with anything other than Autokey
 command
 to assume root may not work properly, since by default the OpenSSL library
 looks for the random seed file
-.rnd
+.rnd
 in the user home directory. 
 However, there should be only one
-.rnd,
+.rnd,
 most conveniently
 in the root directory, so it is convenient to define the
 .Ev RANDFILE
 environment variable used by the OpenSSL library as the path to
-.rnd.
+.rnd.
 
   
Installing the keys as root might not work in NFS-mounted
 shared file systems, as NFS clients may not be able to write
 to the shared keys directory, even as root. 
 In this case, NFS clients can specify the files in another
 directory such as
-/etc
+/etc
 using the
 keysdir
 ntpd(1ntpdmdoc)
@@ -442,7 +435,7 @@ The owner name is also used for the host and sign key files,
 while the trusted name is used for the identity files.
 
   
All files are installed by default in the keys directory
-/usr/local/etc,
+/usr/local/etc,
 which is normally in a shared filesystem
 in NFS-mounted networks. 
 The actual location of the keys directory
@@ -536,13 +529,13 @@ After that and when the host is synchronized to a proventic source, the
 certificate should be re-generated.
 
   
Additional information on trusted groups and identity schemes is on the
-“Autokey Public-Key Authentication”
+Autokey Public-Key Authentication
 page.
 
   
File names begin with the prefix
-ntpkey_
+ntpkey_
 and end with the suffix
-_hostname. filestamp,
+_hostname. filestamp,
 where
 hostname
 is the owner name, usually the string returned
@@ -554,10 +547,10 @@ is the NTP seconds when the file was generated, in decimal digits.
 This both guarantees uniqueness and simplifies maintenance
 procedures, since all files can be quickly removed
 by a
-rm ntpkey*
+rm ntpkey*
 command or all files generated
 at a specific time can be removed by a
-rm *filestamp
+rm *filestamp
 command. 
 To further reduce the risk of misconfiguration,
 the first two lines of a file contain the file name
@@ -596,7 +589,7 @@ section of
 
   
On each trusted host as root, change to the keys directory. 
 To insure a fresh fileset, remove all
-ntpkey
+ntpkey
 files. 
 Then run
 ntp-keygen
@@ -688,18 +681,18 @@ On trusted host alice run
 -P
 -p password
 to generate the host key file
-ntpkey_ RSA key_alice. filestamp
+ntpkey_ RSA key_alice. filestamp
 and trusted private certificate file
-ntpkey_ RSA-MD5 _ cert_alice. filestamp,
+ntpkey_ RSA-MD5 _ cert_alice. filestamp,
 and soft links. 
 Copy both files to all group hosts;
 they replace the files which would be generated in other schemes. 
 On each host
 bob
 install a soft link from the generic name
-ntpkey_host_bob
+ntpkey_host_bob
 to the host key file and soft link
-ntpkey_cert_bob
+ntpkey_cert_bob
 to the private certificate file. 
 Note the generic links are on bob, but point to files generated
 by trusted host alice. 
@@ -722,11 +715,11 @@ On trusted host alice run
 -I
 -p password
 to produce her parameter file
-ntpkey_IFFpar_alice.filestamp,
+ntpkey_IFFpar_alice.filestamp,
 which includes both server and client keys. 
 Copy this file to all group hosts that operate as both servers
 and clients and install a soft link from the generic
-ntpkey_iff_alice
+ntpkey_iff_alice
 to this file. 
 If there are no hosts restricted to operate only as clients,
 there is nothing further to do. 
@@ -745,7 +738,7 @@ After generating the parameter file, on alice run
 and pipe the output to a file or email program. 
 Copy or email this file to all restricted clients. 
 On these clients install a soft link from the generic
-ntpkey_iff_alice
+ntpkey_iff_alice
 to this file. 
 To further protect the integrity of the keys,
 each file can be encrypted with a secret password.
@@ -765,17 +758,17 @@ On trusted host alice run
 -G
 -p password
 to produce her parameter file
-ntpkey_GQpar_alice.filestamp,
+ntpkey_GQpar_alice.filestamp,
 which includes both server and client keys. 
 Copy this file to all group hosts and install a soft link
 from the generic
-ntpkey_gq_alice
+ntpkey_gq_alice
 to this file. 
 In addition, on each host
 bob
 install a soft link
 from generic
-ntpkey_gq_bob
+ntpkey_gq_bob
 to this file. 
 As the
 GQ
@@ -800,9 +793,9 @@ where
 n
 is the number of revokable keys (typically 5) to produce
 the parameter file
-ntpkeys_MVpar_trish.filestamp
+ntpkeys_MVpar_trish.filestamp
 and client key files
-ntpkeys_MVkeyd _ trish. filestamp
+ntpkeys_MVkeyd _ trish. filestamp
 where
 d
 is the key number (0 <
@@ -811,7 +804,7 @@ is the key number (0 <
 n). 
 Copy the parameter file to alice and install a soft link
 from the generic
-ntpkey_mv_alice
+ntpkey_mv_alice
 to this file. 
 Copy one of the client key files to alice for later distribution
 to her clients. 
@@ -819,7 +812,7 @@ It does not matter which client key file goes to alice,
 since they all work the same way. 
 Alice copies the client key file to all of her clients. 
 On client bob install a soft link from generic
-ntpkey_mvkey_bob
+ntpkey_mvkey_bob
 to the client key file. 
 As the
 MV
@@ -878,7 +871,7 @@ public parameters from the
 IFFkey or GQkey
 client keys file previously specified
 as unencrypted data to the standard output stream
-stdout. 
+stdout. 
 This is intended for automatic key distribution by email. 
 
-G --gq-params
Generate a new encrypted
 GQ
@@ -912,7 +905,7 @@ The group name, if specified using
 or
 -s
 following an
-‘@’
+@
 character, is also used in certificate subject and issuer names in the form
 host @ group
 and should match the group specified via
@@ -954,7 +947,7 @@ Note: the PC identity scheme is not recommended for new installations.
 
-q --export-passwd= passwd
Set the password for writing encrypted
 IFF, GQ and MV
 identity files redirected to
-stdout
+stdout
 to
 passwd. 
 In effect, these files are decrypted with the
@@ -1029,7 +1022,7 @@ but are outside the scope of this page.
 
   The entropy seed used by the OpenSSL library is contained in a file,
 usually called
-.rnd,
+.rnd,
 which must be available when starting the NTP daemon
 or the
 ntp-keygen
@@ -1052,16 +1045,16 @@ If the
 .Ev RANDFILE
 environment variable is not present,
 the library will look for the
-.rnd
+.rnd
 file in the user home directory. 
 Since both the
 ntp-keygen
 program and
 ntpd(1ntpdmdoc)
 daemon must run as root, the logical place to put this file is in
-/.rnd
+/.rnd
 or
-/root/.rnd. 
+/root/.rnd. 
 If the file is not available or cannot be written,
 the daemon exits with a message to the system log and the program
 exits with a suitable error message.
@@ -1071,7 +1064,7 @@ exits with a suitable error message.
 
All file formats begin with two nonencrypted lines. 
 The first line contains the file name, including the generated host name
 and filestamp, in the format
-ntpkey_key _ name. filestamp,
+ntpkey_key _ name. filestamp,
 where
 key
 is the key or parameter type,
@@ -1087,10 +1080,10 @@ characters, while
 names in generated link names include only lower case characters. 
 The filestamp is not used in generated link names. 
 The second line contains the datestamp in conventional Unix
-date
+date
 format. 
 Lines beginning with
-‘#’
+#
 are considered comments and ignored by the
 ntp-keygen
 program and
@@ -1102,11 +1095,12 @@ rules, then encrypted if necessary, and finally written in PEM-encoded
 printable ASCII text, preceded and followed by MIME content identifier lines.
 
   
The format of the symmetric keys file, ordinarily named
-ntp.keys,
+ntp.keys,
 is somewhat different than the other files in the interest of backward compatibility. 
 Ordinarily, the file is generated by this program, but it can be constructed
 and edited using an ordinary text editor.
-
# ntpkey_MD5key_bk.ntp.org.3595864945
++# ntpkey_MD5key_bk.ntp.org.3595864945
 # Thu Dec 12 19:22:25 2013
 
 1  MD5 L";Nw<\`.I<f4U0)247"i  # MD5 key
@@ -1157,13 +1151,13 @@ is the key itself,
 which is a printable ASCII string 20 characters or less in length:
 each character is chosen from the 93 printable characters
 in the range 0x21 through 0x7e (
-‘’! 
+! 
 through
-‘~’
+~
 ) excluding space and the
-‘#’
+#
 character, and terminated by whitespace or a
-‘#’
+#
 character. 
 An OpenSSL key consists of a hex-encoded ASCII string of 40 characters, which
 is truncated as necessary.
@@ -1180,12 +1174,12 @@ in human readable ASCII format.
   The
 ntp-keygen
 program generates a symmetric keys file
-ntpkey_MD5key_hostname. filestamp. 
+ntpkey_MD5key_hostname. filestamp. 
 Since the file contains private shared keys,
 it should be visible only to root and distributed by secure means
 to other subnet hosts. 
 The NTP daemon loads the file
-ntp.keys,
+ntp.keys,
 so
 ntp-keygen
 installs a soft link from this name to the generated file. 
@@ -1204,7 +1198,7 @@ using the agtexi-cmd template and the option descriptions for the <
 This software is released under the NTP license, <http://ntp.org/license>.
 
 

-ntp-keygen usage:                   ntp-keygen help/usage (--help)
+
ntp-keygen usage:                   ntp-keygen help/usage (--help)
 
ntp-keygen imbits:                  imbits option (-b)
 
ntp-keygen certificate:             certificate option (-c)
 
ntp-keygen cipher:                  cipher option (-C)
@@ -1232,28 +1226,26 @@ This software is released under the NTP license, <http://ntp.org/license>.
 
 
 
-
-
 

-Next: ntp-keygen imbits,
+Next: ntp-keygen imbits,
 Up: ntp-keygen Invocation
-
+

 
 
-ntp-keygen help/usage (--help)
+ntp-keygen help/usage (--help)
 
 
 This is the automatically generated usage text for ntp-keygen.
 
   
The text printed is the same whether selected with the help option
-(--help) or the more-help option (--more-help).  more-help will print
+(--help) or the more-help option (--more-help).  more-help will print
 the usage text by passing it through a pager program. 
 more-help is disabled on platforms without a working
 fork(2) function.  The PAGER environment variable is
-used to select the program, defaulting to more.  Both will exit
+used to select the program, defaulting to more.  Both will exit
 with a status code of 0.
 
-
ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p10-x
+ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p10
 Usage:  ntp-keygen [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
   Flg Arg Option-Name    Description
    -b Num imbits         identity modulus bits
@@ -1303,20 +1295,18 @@ The following option preset mechanisms are supported:
 Please send bug reports to:  <http://bugs.ntp.org, bugs@ntp.org>
 
   
-
-
 

-Next: ntp-keygen certificate,
+Next: ntp-keygen certificate,
 Previous: ntp-keygen usage,
 Up: ntp-keygen Invocation
-
+

 
 
 imbits option (-b)
 
 
 This is the “identity modulus bits” option. 
-This option takes a number argument imbits.
+This option takes a number argument imbits.
 
 
This option has some usage constraints.  It:
      

@@ -1325,20 +1315,18 @@ This option takes a number argument imbitsThe number of bits in the identity modulus.  The default is 256. 
 
-
-
 

-Next: ntp-keygen cipher,
+Next: ntp-keygen cipher,
 Previous: ntp-keygen imbits,
 Up: ntp-keygen Invocation
-
+

 
 
 certificate option (-c)
 
 
 This is the “certificate scheme” option. 
-This option takes a string argument scheme.
+This option takes a string argument scheme.
 
 
This option has some usage constraints.  It:
      

@@ -1354,20 +1342,18 @@ Note that RSA schemes must be used with a RSA sign key and DSA
 schemes must be used with a DSA sign key.  The default without
 this option is RSA-MD5. 
 
-
-
 

-Next: ntp-keygen id-key,
+Next: ntp-keygen id-key,
 Previous: ntp-keygen certificate,
 Up: ntp-keygen Invocation
-
+

 
 
 cipher option (-C)
 
 
 This is the “privatekey cipher” option. 
-This option takes a string argument cipher.
+This option takes a string argument cipher.
 
 
This option has some usage constraints.  It:
      

@@ -1379,13 +1365,11 @@ private keys.  The default is three-key triple DES in CBC mode,
 equivalent to "-C des-ede3-cbc".  The openssl tool lists ciphers
 available in "openssl -h" output. 
 
-
-
 

-Next: ntp-keygen gq-params,
+Next: ntp-keygen gq-params,
 Previous: ntp-keygen cipher,
 Up: ntp-keygen Invocation
-
+

 
 
 id-key option (-e)
@@ -1402,13 +1386,11 @@ This is the “write iff or gq identity keys” option.
 the standard output. 
 This is intended for automatic key distribution by email. 
 
-
-
 

-Next: ntp-keygen host-key,
+Next: ntp-keygen host-key,
 Previous: ntp-keygen id-key,
 Up: ntp-keygen Invocation
-
+

 
 
 gq-params option (-G)
@@ -1424,13 +1406,11 @@ This is the “generate gq parameters and keys” option.
   Generate parameters and keys for the GQ identification scheme,
 obsoleting any that may exist. 
 

-
-
 

-Next: ntp-keygen iffkey,
+Next: ntp-keygen iffkey,
 Previous: ntp-keygen gq-params,
 Up: ntp-keygen Invocation
-
+

 
 
 host-key option (-H)
@@ -1445,13 +1425,11 @@ This is the “generate rsa host key” option.
 
   Generate new host keys, obsoleting any that may exist. 
 

-
-
 

-Next: ntp-keygen ident,
+Next: ntp-keygen ident,
 Previous: ntp-keygen host-key,
 Up: ntp-keygen Invocation
-
+

 
 
 iffkey option (-I)
@@ -1467,20 +1445,18 @@ This is the “generate iff parameters” option.
   Generate parameters for the IFF identification scheme, obsoleting
 any that may exist. 
 

-
-
 

-Next: ntp-keygen lifetime,
+Next: ntp-keygen lifetime,
 Previous: ntp-keygen iffkey,
 Up: ntp-keygen Invocation
-
+

 
 
 ident option (-i)
 
 
 This is the “set autokey group name” option. 
-This option takes a string argument group.
+This option takes a string argument group.
 
 
This option has some usage constraints.  It:
      

@@ -1497,20 +1473,18 @@ issuer names in the form host@group and should match the
 'crypto ident' or 'server ident' configuration in the
 ntpd configuration file. 
 
-
-
 

-Next: ntp-keygen modulus,
+Next: ntp-keygen modulus,
 Previous: ntp-keygen ident,
 Up: ntp-keygen Invocation
-
+

 
 
 lifetime option (-l)
 
 
 This is the “set certificate lifetime” option. 
-This option takes a number argument lifetime.
+This option takes a number argument lifetime.
 
 
This option has some usage constraints.  It:
      

@@ -1519,20 +1493,18 @@ This option takes a number argument lifetimeSet the certificate expiration to lifetime days from now. 
 
-
-
 

-Next: ntp-keygen md5key,
+Next: ntp-keygen md5key,
 Previous: ntp-keygen lifetime,
 Up: ntp-keygen Invocation
-
+

 
 
 modulus option (-m)
 
 
 This is the “prime modulus” option. 
-This option takes a number argument modulus.
+This option takes a number argument modulus.
 
 
This option has some usage constraints.  It:
      

@@ -1541,13 +1513,11 @@ This option takes a number argument modulusThe number of bits in the prime modulus.  The default is 512. 
 
-
-
 

-Next: ntp-keygen pvt-cert,
+Next: ntp-keygen pvt-cert,
 Previous: ntp-keygen modulus,
 Up: ntp-keygen Invocation
-
+

 
 
 md5key option (-M)
@@ -1556,13 +1526,11 @@ Up: ntp-keygen
 This is the “generate symmetric keys” option. 
 Generate symmetric keys, obsoleting any that may exist. 
 
-
-
 

-Next: ntp-keygen password,
+Next: ntp-keygen password,
 Previous: ntp-keygen md5key,
 Up: ntp-keygen Invocation
-
+

 
 
 pvt-cert option (-P)
@@ -1578,20 +1546,18 @@ This is the “generate pc private certificate” option.
   Generate a private certificate.  By default, the program generates
 public certificates. 
 

-
-
 

-Next: ntp-keygen export-passwd,
+Next: ntp-keygen export-passwd,
 Previous: ntp-keygen pvt-cert,
 Up: ntp-keygen Invocation
-
+

 
 
 password option (-p)
 
 
 This is the “local private password” option. 
-This option takes a string argument passwd.
+This option takes a string argument passwd.
 
 
This option has some usage constraints.  It:
      

@@ -1604,20 +1570,18 @@ must be specified to the local ntpd via the "crypto pw password"
 configuration command.  The default password is the local
 hostname. 
 
-
-
 

-Next: ntp-keygen subject-name,
+Next: ntp-keygen subject-name,
 Previous: ntp-keygen password,
 Up: ntp-keygen Invocation
-
+

 
 
 export-passwd option (-q)
 
 
 This is the “export iff or gq group keys with password” option. 
-This option takes a string argument passwd.
+This option takes a string argument passwd.
 
 
This option has some usage constraints.  It:
      

@@ -1630,20 +1594,18 @@ The same password must be specified to the remote ntpd via the
 "crypto pw password" configuration command.  See also the option
 –id-key (-e) for unencrypted exports. 
 
-
-
 

-Next: ntp-keygen sign-key,
+Next: ntp-keygen sign-key,
 Previous: ntp-keygen export-passwd,
 Up: ntp-keygen Invocation
-
+

 
 
 subject-name option (-s)
 
 
 This is the “set host and optionally group name” option. 
-This option takes a string argument host@group.
+This option takes a string argument host@group.
 
 
This option has some usage constraints.  It:
      

@@ -1661,20 +1623,18 @@ subject and issuer fields, as with -i group.  The group name, or
 if not provided, the host name are also used in the file names
 of IFF, GQ, and MV client parameter files. 
 
-
-
 

-Next: ntp-keygen trusted-cert,
+Next: ntp-keygen trusted-cert,
 Previous: ntp-keygen subject-name,
 Up: ntp-keygen Invocation
-
+

 
 
 sign-key option (-S)
 
 
 This is the “generate sign key (rsa or dsa)” option. 
-This option takes a string argument sign.
+This option takes a string argument sign.
 
 
This option has some usage constraints.  It:
      

@@ -1685,13 +1645,11 @@ This option takes a string argument sign.
 that may exist.  By default, the program uses the host key as the
 sign key. 
 
-
-
 

-Next: ntp-keygen mv-params,
+Next: ntp-keygen mv-params,
 Previous: ntp-keygen sign-key,
 Up: ntp-keygen Invocation
-
+

 
 
 trusted-cert option (-T)
@@ -1707,20 +1665,18 @@ This is the “trusted certificate (tc scheme)” option.
   Generate a trusted certificate.  By default, the program generates
 a non-trusted certificate. 
 

-
-
 

-Next: ntp-keygen mv-keys,
+Next: ntp-keygen mv-keys,
 Previous: ntp-keygen trusted-cert,
 Up: ntp-keygen Invocation
-
+

 
 
 mv-params option (-V)
 
 
 This is the “generate <num> mv parameters” option. 
-This option takes a number argument num.
+This option takes a number argument num.
 
 
This option has some usage constraints.  It:
      

@@ -1730,36 +1686,32 @@ This option takes a number argument num.
   Generate parameters and keys for the Mu-Varadharajan (MV)
 identification scheme. 
 

-
-
 

-Next: ntp-keygen config,
+Next: ntp-keygen config,
 Previous: ntp-keygen mv-params,
 Up: ntp-keygen Invocation
-
+

 
 
 mv-keys option (-v)
 
 
 This is the “update <num> mv keys” option. 
-This option takes a number argument num.
+This option takes a number argument num.
 
 
This option has some usage constraints.  It:
      

 must be compiled in by defining AUTOKEY during the compilation. 
 
 
-  This option has no ‘doc’ documentation.
+  
This option has no doc documentation.
 
 

-
-
 

-Next: ntp-keygen exit status,
+Next: ntp-keygen exit status,
 Previous: ntp-keygen mv-keys,
 Up: ntp-keygen Invocation
-
+

 
 
 presetting/configuring ntp-keygen
@@ -1777,9 +1729,9 @@ values are treated like option arguments.
 $PWD
 
   The environment variables HOME, and PWD
-are expanded and replaced when ntp-keygen runs. 
+are expanded and replaced when ntp-keygen runs. 
 For any of these that are plain files, they are simply processed. 
-For any that are directories, then a file named .ntprc is searched for
+For any that are directories, then a file named .ntprc is searched for
 within that directory and processed.
 
   Configuration files may be in a wide variety of formats. 
@@ -1821,73 +1773,64 @@ detail to provide.  The default is to print just the version.  The licensing inf
 Only the first letter of the argument is examined:
 
      

-‘version’
Only print the version.  This is the default. 
-
‘copyright’
Name the copyright usage licensing terms. 
-
‘verbose’
Print the full copyright usage licensing terms. 
+
version
Only print the version.  This is the default. 
+
copyright
Name the copyright usage licensing terms. 
+
verbose
Print the full copyright usage licensing terms. 
 
 
 
-
-
 

-Next: ntp-keygen Usage,
+Next: ntp-keygen Usage,
 Previous: ntp-keygen config,
 Up: ntp-keygen Invocation
-
+

 
 
 ntp-keygen exit status
 
 One of the following exit values will be returned:
      

-‘0 (EXIT_SUCCESS)’
Successful program execution. 
-
‘1 (EXIT_FAILURE)’
The operation failed or the command syntax was not valid. 
-
‘66 (EX_NOINPUT)’
A specified configuration file could not be loaded. 
-
‘70 (EX_SOFTWARE)’
libopts had an internal operational error.  Please report
+
0 (EXIT_SUCCESS)
Successful program execution. 
+
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid. 
+
66 (EX_NOINPUT)
A specified configuration file could not be loaded. 
+
70 (EX_SOFTWARE)
libopts had an internal operational error.  Please report
 it to autogen-users@lists.sourceforge.net.  Thank you. 
 
   
-
-
 

-Next: ntp-keygen Notes,
+Next: ntp-keygen Notes,
 Previous: ntp-keygen exit status,
 Up: ntp-keygen Invocation
-
+

 
 
 ntp-keygen Usage
 
 
-
-
 

-Next: ntp-keygen Bugs,
+Next: ntp-keygen Bugs,
 Previous: ntp-keygen Usage,
 Up: ntp-keygen Invocation
-
+

 
 
 ntp-keygen Notes
 
 
-
-
 

-Previous: ntp-keygen Notes,
+Previous: ntp-keygen Notes,
 Up: ntp-keygen Invocation
-
+

 
 
 ntp-keygen Bugs
 
 
-
 

-Next: Cryptographic Data Files,
+Next: Cryptographic Data Files,
 Previous: Running the Program,
 Up: Top
-
+

 
 
 
@@ -1915,11 +1858,10 @@ If the file is not available or cannot be written, the program exits
 with a message to the system log.
 
 
-
 

-Previous: Random Seed File,
+Previous: Random Seed File,
 Up: Top
-
+

 
 
 
diff --git a/util/ntp-keygen.man.in b/util/ntp-keygen.man.in
index c302c5632..71dcaa5ad 100644
--- a/util/ntp-keygen.man.in
+++ b/util/ntp-keygen.man.in
@@ -10,11 +10,11 @@
 .ds B-Font B
 .ds I-Font I
 .ds R-Font R
-.TH ntp-keygen @NTP_KEYGEN_MS@ "27 Feb 2018" "ntp (4.2.8p10)" "User Commands"
+.TH ntp-keygen @NTP_KEYGEN_MS@ "27 Feb 2018" "ntp (4.2.8p11)" "User Commands"
 .\"
-.\" EDIT THIS FILE WITH CAUTION (in-mem file)
+.\" EDIT THIS FILE WITH CAUTION (/tmp/.ag-bBa46V/ag-nBaW5V)
 .\"
-.\" It has been AutoGen-ed February 27, 2018 at 07:26:44 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed February 27, 2018 at 05:15:53 PM by AutoGen 5.18.5
 .\" From the definitions ntp-keygen-opts.def
 .\" and the template file agman-cmd.tpl
 .SH NAME
diff --git a/util/ntp-keygen.mdoc.in b/util/ntp-keygen.mdoc.in
index 107723ad2..8ed42c024 100644
--- a/util/ntp-keygen.mdoc.in
+++ b/util/ntp-keygen.mdoc.in
@@ -3,7 +3,7 @@
 .Os
 .\"  EDIT THIS FILE WITH CAUTION  (ntp-keygen-opts.mdoc)
 .\"
-.\"  It has been AutoGen-ed  February 27, 2018 at 07:26:40 AM by AutoGen 5.18.5
+.\"  It has been AutoGen-ed  February 27, 2018 at 05:16:00 PM by AutoGen 5.18.5
 .\"  From the definitions    ntp-keygen-opts.def
 .\"  and the template file   agmdoc-cmd.tpl
 .Sh NAME
NTP Configuration File User's Manual

NTP's Configuration File User Manual

Short Contents

Notes about ntp.conf

Configuration Support

Authentication Support

Monitoring Support

Access Control Support

Automatic NTP Configuration Options

Reference Clock Support

Miscellaneous Options

ntp.conf Files

ntp.conf See Also

ntp.conf Bugs

ntp.conf Notes

NTP Symmetric Key

NTP's Symmetric Key File User Manual

Short Contents

Notes about ntp.keys

ntp.keys Files

ntp.keys See Also

ntp.keys Notes

ntpd: Network Time Protocol (NTP) Daemon User's Manual

ntpd: Network Time Protocol (NTP) Daemon User Manual

Invoking ntpd

ntpd help/usage (--help)

ntpd help/usage (--help)

ipv4 option (-4)

ipv6 option (-6)

authreq option (-a)

authnoreq option (-A)

configfile option (-c)

driftfile option (-f)

panicgate option (-g)

force-step-once option (-G)

jaildir option (-i)

interface option (-I)

keyfile option (-k)

logfile option (-l)

novirtualips option (-L)

modifymmtimer option (-M)

nice option (-N)

pidfile option (-p)

priority option (-P)

quit option (-q)

propagationdelay option (-r)

saveconfigquit option

statsdir option (-s)

trustedkey option (-t)

user option (-u)

updateinterval option (-U)

wait-sync option (-w)

slew option (-x)

usepcc option

pccfreq option

mdns option (-m)

presetting/configuring ntpd

ntpd exit status

ntpd Usage

ntpd Files

ntpd See Also

ntpd Bugs

ntpd Notes

ntpdc: NTPD Control User's Manual

ntpdc: NTPD Control User Manual

Invoking ntpdc

ntpdc help/usage (--help)

ntpdc help/usage (--help)

ipv4 option (-4)

ipv6 option (-6)

command option (-c)

interactive option (-i)

listpeers option (-l)

numeric option (-n)

peers option (-p)

showpeers option (-s)

presetting/configuring ntpdc

ntpdc exit status

ntpdc Usage

ntpdc See Also

ntpd help/usage (`--help`)

ntpdc help/usage (`--help`)

ntpq help/usage (`--help`)

calc_tickadj help/usage (`--help`)

0.1.1 ntp-wait help/usage (`--help`)

0.1.1 ntpsweep help/usage (`--help`)

ntptrace help/usage (`--help`)

plot_summary help/usage (`--help`)
