From: Antoni Pokusinski Date: Thu, 2 Oct 2025 20:02:04 +0000 (+0200) Subject: iio: mpl3115: rename CTRL_REG1 field macros X-Git-Tag: v6.19-rc1~65^2~58^2~125 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b4105b20312a48a7723ad13fe180fbe6c066ac34;p=thirdparty%2Fkernel%2Flinux.git iio: mpl3115: rename CTRL_REG1 field macros Rename the bitfield macros of CTRL_REG1, so that their names clearly indicate their relation to CTRL_REG1. This is a preparation for introducing the support for the DRDY interrupt which requires the usage of other control registers. Signed-off-by: Antoni Pokusinski Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c index 1da78081ca7eb..61830edd959b7 100644 --- a/drivers/iio/pressure/mpl3115.c +++ b/drivers/iio/pressure/mpl3115.c @@ -30,10 +30,10 @@ #define MPL3115_STATUS_PRESS_RDY BIT(2) #define MPL3115_STATUS_TEMP_RDY BIT(1) -#define MPL3115_CTRL_RESET BIT(2) /* software reset */ -#define MPL3115_CTRL_OST BIT(1) /* initiate measurement */ -#define MPL3115_CTRL_ACTIVE BIT(0) /* continuous measurement */ -#define MPL3115_CTRL_OS_258MS (BIT(5) | BIT(4)) /* 64x oversampling */ +#define MPL3115_CTRL1_RESET BIT(2) /* software reset */ +#define MPL3115_CTRL1_OST BIT(1) /* initiate measurement */ +#define MPL3115_CTRL1_ACTIVE BIT(0) /* continuous measurement */ +#define MPL3115_CTRL1_OS_258MS GENMASK(5, 4) /* 64x oversampling */ struct mpl3115_data { struct i2c_client *client; @@ -47,7 +47,7 @@ static int mpl3115_request(struct mpl3115_data *data) /* trigger measurement */ ret = i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, - data->ctrl_reg1 | MPL3115_CTRL_OST); + data->ctrl_reg1 | MPL3115_CTRL1_OST); if (ret < 0) return ret; @@ -56,7 +56,7 @@ static int mpl3115_request(struct mpl3115_data *data) if (ret < 0) return ret; /* wait for data ready, i.e. OST cleared */ - if (!(ret & MPL3115_CTRL_OST)) + if (!(ret & MPL3115_CTRL1_OST)) break; msleep(20); } @@ -268,10 +268,10 @@ static int mpl3115_probe(struct i2c_client *client) /* software reset, I2C transfer is aborted (fails) */ i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, - MPL3115_CTRL_RESET); + MPL3115_CTRL1_RESET); msleep(50); - data->ctrl_reg1 = MPL3115_CTRL_OS_258MS; + data->ctrl_reg1 = MPL3115_CTRL1_OS_258MS; ret = i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, data->ctrl_reg1); if (ret < 0) @@ -295,7 +295,7 @@ buffer_cleanup: static int mpl3115_standby(struct mpl3115_data *data) { return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, - data->ctrl_reg1 & ~MPL3115_CTRL_ACTIVE); + data->ctrl_reg1 & ~MPL3115_CTRL1_ACTIVE); } static void mpl3115_remove(struct i2c_client *client)