From: Ravi Hothi Date: Fri, 20 Feb 2026 09:02:20 +0000 (+0530) Subject: arm64: dts: qcom: qcm6490-idp: Fix WCD9370 reset GPIO polarity X-Git-Tag: v7.0~35^2~1^2~7 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b7df21c59739cceb7b866c6c5e8a6ba03875ab71;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: qcm6490-idp: Fix WCD9370 reset GPIO polarity The WCD9370 audio codec reset line on QCM6490 IDP should be active-low, but the device tree described it as active-high. As a result, the codec is kept in reset and fails to reset the SoundWire, leading to timeouts and ASoC card probe failure (-ETIMEDOUT). Fix the reset GPIO polarity to GPIO_ACTIVE_LOW so the codec can properly initialize. Fixes: aa04c298619f ("arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec") Signed-off-by: Ravi Hothi Reviewed-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260220090220.2992193-1-ravi.hothi@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 089a027c57d5..b2f00e107643 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -177,7 +177,7 @@ pinctrl-0 = <&wcd_default>; pinctrl-names = "default"; - reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_l17b_1p7>; vdd-rxtx-supply = <&vreg_l18b_1p8>;