From: Ray Jui <ray.jui@broadcom.com>
Date: Mon, 28 May 2018 18:01:34 +0000 (-0700)
Subject: watchdog: sp805: add 'timeout-sec' DT property support
X-Git-Tag: v4.19-rc1~94^2~7
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b800885888406f33edfec0eb1cb752292f23de83;p=thirdparty%2Flinux.git

watchdog: sp805: add 'timeout-sec' DT property support

Add support for optional devicetree property 'timeout-sec'.
'timeout-sec' is used in the driver if specified in devicetree.
Otherwise, fall back to driver default, i.e., 60 seconds

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
---

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9849db0743a75..b240195597c1f 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -244,7 +244,14 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
 	watchdog_set_drvdata(&wdt->wdd, wdt);
 	watchdog_set_restart_priority(&wdt->wdd, 128);
-	wdt_setload(&wdt->wdd, DEFAULT_TIMEOUT);
+
+	/*
+	 * If 'timeout-sec' devicetree property is specified, use that.
+	 * Otherwise, use DEFAULT_TIMEOUT
+	 */
+	wdt->wdd.timeout = DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &adev->dev);
+	wdt_setload(&wdt->wdd, wdt->wdd.timeout);
 
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret) {