From: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Date: Mon, 12 May 2025 13:33:17 +0000 (+0000)
Subject: arm64: dts: blaize-blzp1600: Enable GPIO support
X-Git-Tag: v6.16-rc1~97^2~29
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c07da6de0eb87a328d8905585a9ca1076c6ee216;p=thirdparty%2Fkernel%2Fstable.git

arm64: dts: blaize-blzp1600: Enable GPIO support

Blaize BLZP1600 uses the custom silicon provided from
VeriSilicon to add GPIO support.
This interface is used to control signals on many other
peripherals, such as Ethernet, USB, SD and eMMC.

Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250512133302.151621-1-nikolaos.pasaloukos@blaize.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---

diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
index 7e3cef2ed3522..fb5415eb347a0 100644
--- a/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
@@ -81,3 +81,39 @@
 				  "UART1_TO_RSP";	/* GPIO_15 */
 	};
 };
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names = "PERST_N",		/* GPIO_0 */
+			  "LM96063_ALERT_N",	/* GPIO_1 */
+			  "INA3221_PV",		/* GPIO_2 */
+			  "INA3221_CRIT",	/* GPIO_3 */
+			  "INA3221_WARN",	/* GPIO_4 */
+			  "INA3221_TC",		/* GPIO_5 */
+			  "QSPI0_RST_N",	/* GPIO_6 */
+			  "LM96063_TCRIT_N",	/* GPIO_7 */
+			  "DSI_TCH_INT",	/* GPIO_8 */
+			  "DSI_RST",		/* GPIO_9 */
+			  "DSI_BL",		/* GPIO_10 */
+			  "DSI_INT",		/* GPIO_11 */
+			  "ETH_RST",		/* GPIO_12 */
+			  "CSI0_RST",		/* GPIO_13 */
+			  "CSI0_PWDN",		/* GPIO_14 */
+			  "CSI1_RST",		/* GPIO_15 */
+			  "CSI1_PWDN",		/* GPIO_16 */
+			  "CSI2_RST",		/* GPIO_17 */
+			  "CSI2_PWDN",		/* GPIO_18 */
+			  "CSI3_RST",		/* GPIO_19 */
+			  "CSI3_PWDN",		/* GPIO_20 */
+			  "ADAC_RST",		/* GPIO_21 */
+			  "SD_SW_VDD",		/* GPIO_22 */
+			  "SD_PON_VDD",		/* GPIO_23 */
+			  "GPIO_EXP_INT",	/* GPIO_24 */
+			  "BOARD_ID_0",		/* GPIO_25 */
+			  "SDIO1_SW_VDD",	/* GPIO_26 */
+			  "SDIO1_PON_VDD",	/* GPIO_27 */
+			  "SDIO2_SW_VDD",	/* GPIO_28 */
+			  "SDIO2_PON_VDD",	/* GPIO_29 */
+			  "BOARD_ID_1",		/* GPIO_30 */
+			  "BOARD_ID_2";		/* GPIO_31 */
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
index 7d399e6a532f5..5a6c882b2f57d 100644
--- a/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
@@ -120,6 +120,18 @@
 						 IRQ_TYPE_LEVEL_LOW)>;
 		};
 
+		gpio0: gpio@4c0000 {
+			compatible = "blaize,blzp1600-gpio";
+			reg = <0x4c0000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@4d0000 {
 			compatible = "ns16550a";
 			reg = <0x4d0000 0x1000>;