From: Martin Blumenstingl Date: Sat, 29 Dec 2018 12:57:10 +0000 (+0100) Subject: ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low X-Git-Tag: v4.20.16~95 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c33aac2f12bcd5e8d5b1c3d3bb096b519b9c662d;p=thirdparty%2Fkernel%2Fstable.git ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low [ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ] After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin --- diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 0872f6e3abf56..d50fc2f60fa31 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -205,8 +205,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; };