From: Neha Malcom Francis <n-francis@ti.com>
Date: Wed, 15 Apr 2026 15:21:52 +0000 (+0530)
Subject: arch: mach-k3: j784s4_init: Add workaround for errata i2437
X-Git-Tag: v2026.07-rc2~2^2
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c5c3b2787383e25b1882f7e8cf3db54eaf318b41;p=thirdparty%2Fu-boot.git

arch: mach-k3: j784s4_init: Add workaround for errata i2437

Add the workaround proposed for J784S4 errata i2437 (link) for SE
clock-gating turning off too early. Without this, a hardware bug present
in C7120 leads to C7120 CPU hanging.

Link: https://www.ti.com/lit/pdf/sprz536
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---

diff --git a/arch/arm/mach-k3/j784s4/j784s4_init.c b/arch/arm/mach-k3/j784s4/j784s4_init.c
index 53f152ccd9c..507b7ab685a 100644
--- a/arch/arm/mach-k3/j784s4/j784s4_init.c
+++ b/arch/arm/mach-k3/j784s4/j784s4_init.c
@@ -45,6 +45,15 @@
 #define NB_THREADMAP_BIT1				BIT(1)
 #define NB_THREADMAP_BIT2				BIT(2)
 
+/*
+ * RAT mapping for errata ID: i2437
+ */
+#define RAT_ERRATA_2437_BASE_REGION0		0x40f90000
+#define RAT_ERRATA_2437_IN_ADDR			0xc0000000
+#define RAT_ERRATA_2437_OUT_ADDR_U		0x0000004d
+#define RAT_ERRATA_2437_OUT_ADDR_L		0x21000000
+#define RAT_ERRATA_2437_CTRL			0x80000010
+
 struct fwl_data infra_cbass0_fwls[] = {
 	{ "PSC0", 5, 1 },
 	{ "PLL_CTRL0", 6, 1 },
@@ -322,6 +331,36 @@ void board_init_f(ulong dummy)
 		setup_navss_nb();
 
 	setup_qos();
+
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		/*
+		 * Errata ID i2437 SE Clock-Gating Turning Off Too Early
+		 *
+		 * A hardware bug is present in the C7120 Streaming Engine top level
+		 * clock gating logic that can lead to the C7120 CPU hanging.
+
+		 * Workaround: The DSP_<COREID>_DEBUG_CLKEN_OVERRIDE fields of the
+		 * COMPUTE_CLUSTER_CFG_WRAP_0_CC_CNTRL register (where COREID is the
+		 * name of the specific C7120 core) must be enabled before power-up
+		 * of the C7120 core to override all clock-gating.
+		 */
+
+		/* Setup RAT mapping */
+		debug("Errata i2437: Use RAT for COMPUTE_CLUSTER_CFG_WRAP_0_CC_CNTRL register\n");
+		writel_verify(RAT_ERRATA_2437_IN_ADDR, RAT_ERRATA_2437_BASE_REGION0 + 0x24);
+		writel_verify(RAT_ERRATA_2437_OUT_ADDR_L, RAT_ERRATA_2437_BASE_REGION0 + 0x28);
+		writel_verify(RAT_ERRATA_2437_OUT_ADDR_U, RAT_ERRATA_2437_BASE_REGION0 + 0x2c);
+		writel_verify(RAT_ERRATA_2437_CTRL, RAT_ERRATA_2437_BASE_REGION0 + 0x20);
+
+		/* Enable DSP_X_DEBUG_CLKEN_OVERRIDE for C71x cores */
+		writel_verify(0xF00, RAT_ERRATA_2437_IN_ADDR + 0x200);
+
+		/* Clear RAT mapping */
+		writel_verify(0, RAT_ERRATA_2437_BASE_REGION0 + 0x20);
+		writel_verify(0, RAT_ERRATA_2437_BASE_REGION0 + 0x24);
+		writel_verify(0, RAT_ERRATA_2437_BASE_REGION0 + 0x28);
+		writel_verify(0, RAT_ERRATA_2437_BASE_REGION0 + 0x2c);
+	}
 }
 
 u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)