From: Johan Hovold Date: Mon, 10 Nov 2025 11:12:11 +0000 (+0100) Subject: USB: serial: ftdi_sio: clean up NDI speed hack X-Git-Tag: v6.19-rc1~63^2~1^2~4 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=cde24373724bd3a0937b7af9453dfc6d7433c726;p=thirdparty%2Fkernel%2Flinux.git USB: serial: ftdi_sio: clean up NDI speed hack NDI devices remap the 19200 line speed to 1.2 Mbps. Use the quirk pointer from the match table to enable the quirk instead of comparing PIDs on every speed change. Signed-off-by: Johan Hovold --- diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 58dbf922208c7..d77c1ccafe051 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1246,6 +1246,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, static u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port) { + const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial); struct ftdi_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; u32 div_value = 0; @@ -1305,17 +1306,8 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, case FT232R: case FTX: if (baud <= 3000000) { - u16 product_id = le16_to_cpu( - port->serial->dev->descriptor.idProduct); - if (((product_id == FTDI_NDI_HUC_PID) || - (product_id == FTDI_NDI_SPECTRA_SCU_PID) || - (product_id == FTDI_NDI_FUTURE_2_PID) || - (product_id == FTDI_NDI_FUTURE_3_PID) || - (product_id == FTDI_NDI_AURORA_SCU_PID) || - (product_id == FTDI_NDI_EMGUIDE_GEMINI_PID)) && - (baud == 19200)) { + if (quirk == &ftdi_ndi_quirk && baud == 19200) baud = 1200000; - } div_value = ftdi_232bm_baud_to_divisor(baud); } else { dev_dbg(dev, "%s - Baud rate too high!\n", __func__);