From: Krzysztof Kozlowski Date: Tue, 6 Jan 2026 18:51:24 +0000 (+0100) Subject: arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d106f9681d1952b7c19726b0713cee6ae11211f5;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts Interrupts for DWC3 node were completely mixed up - SPI interrupt 62 is not listed in reference manual at all. It was also causing dtbs_check warnings: ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names:0: 'pwr_event' was expected ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names: ['hs_phy_irq'] is too short Warning itself was introduced by commit 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding"), but this was trying to bring sanity to the interrupts overall, although did a mistake for IPQ5018. IPQ5018 does not have QUSB2 PHY and its interrupts should rather match ones used in IPQ5332. Correct it by using interrupts matching the bindings and reference manual. Signed-off-by: Krzysztof Kozlowski Tested-by: George Moussalem Link: https://lore.kernel.org/r/20260106185123.19929-3-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 721b642acf8e2..6f8004a22a1ff 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -571,8 +571,12 @@ compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; - interrupts = ; - interrupt-names = "hs_phy_irq"; + interrupts = , + , + ; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,