From: Jouni Malinen Date: Tue, 3 Feb 2015 10:32:37 +0000 (+0200) Subject: Fix hostapd obss_interval documentation X-Git-Tag: hostap_2_4~216 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d2ca6baa567230dead027ea47ae42cb32d46e00d;p=thirdparty%2Fhostap.git Fix hostapd obss_interval documentation This parameter has been available for more than just testing purposes, i.e., OBSS scanning has already been used to enable 20-to-40 MHz channel changes on 2.4 GHz. Signed-off-by: Jouni Malinen --- diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf index b370f21f3..1e5695984 100644 --- a/hostapd/hostapd.conf +++ b/hostapd/hostapd.conf @@ -494,9 +494,9 @@ wmm_ac_vo_acm=0 # If set non-zero, require stations to perform scans of overlapping # channels to test for stations which would be affected by 40 MHz traffic. -# This parameter sets the interval in seconds between these scans. This -# is useful only for testing that stations properly set the OBSS interval, -# since the other parameters in the OBSS scan parameters IE are set to 0. +# This parameter sets the interval in seconds between these scans. Setting this +# to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz channel if +# no co-existence issues with neighboring devices are found. #obss_interval=0 ##### IEEE 802.11ac related configuration #####################################